How to remove and strip down Land Rover Discovery 3 headlight

Рет қаралды 38,476

7 жыл бұрын

In this video we remove the headlights from our Land Rover Discovery 3 then put it in the oven and remove the front lens. Finally we remove the internals. Put in the oven for around 9 minutes at 90 Deg C

Пікірлер: 23

@paullaird4677 7 жыл бұрын

Done mine today , Cheers for parts , went well, had to put the oven on to 90 & leave for 9 mins .

@thegasman.gasman.7643 Жыл бұрын

Hi guys. Been a sub for a while really enjoy yere Chanel I have a question. I have a discovery 2 with uk front headlights, I need to re register the D2 in Europe. I assumed I could adjust the headlights? But At the pre inspection I was told I must replace them. Their expensive to replace. Is there any way I could split them like you’ve done and convert them to European standards ???? I’d appreciate yere thoughts on this. Cheers.

@ryanhenry21 6 жыл бұрын

That light is the size of my first car.

@jamesbuller5404 4 жыл бұрын

Did you use a black sticker at the bottom to cover the silver/grey area?

@L663 4 жыл бұрын

Yes we did - you can buy this here www.powerfuluk.com/vehicles/land-rover/discovery-3/lamps-lights-upgrades/land-rover-discovery-3-diy-haadlight-upgrade-kit.html

@mkps_2340 7 ай бұрын

,👍🏻

@danielmorgan3958 Жыл бұрын

Have you tried to remove the lens on a early d4 headlight? I have done it to a d3 but I’m struggling with my D4 Thanks

@Chris2k22 5 ай бұрын

How did it go? Thinking about changing the lenses on my 2011 d4

@paulmurphy454 7 жыл бұрын

what about using hair dryer to maintain the ovens heat

@rustytwinkles7762 3 жыл бұрын

quick question, i have the old type of head light with the 2 normal bulbs, if i wanted to have the xenon headlight like yours, is it just a straight swap over? thank you

@larry365 2 жыл бұрын

Xenon and Bi-Xenon are a straight swap. Ideally you need to change the settings using an IID tool too; this will stop them from flicking for a second when you turn them on. There is a 4th unit, the bi-xenon AFS. The lights turn with the steering on these units. They aren't a straight swap, you need the ECU, connectors and splice into the loom.

@liketrumpets07 4 жыл бұрын

This method ok with Xenon's too?

@davidbest1 3 жыл бұрын

These are xenons so yeah

@liketrumpets07 3 жыл бұрын

@@davidbest1 7 months late on a reply there pal, Done mine a long time ago

@miroarva1424 5 ай бұрын

Why not using heat gun?

@abdallahravat5756 5 жыл бұрын

You never gave the most important information.... the oven setting????

@L663 5 жыл бұрын

My bad - looking at the setting on the right hand dial it looks like it was 80-100 Deg C

@L663 5 жыл бұрын

This is confirmed by the comment below - 90 & leave for 9 mins

@abdallahravat5756 5 жыл бұрын

@@L663 cheers mate

@lyletregoning4717 5 жыл бұрын

Why do you want to screw around changing all these parts. Sending money painting plastic parts, buying replacement grills to end up with a shit looking imitation disco 4. Just buy one.....

@L663 5 жыл бұрын

A disco 3 is a disco 4. If you have a good solid Disco 3 you will only sell it for £5K so why not send a few £100 on giving it a re-fresh. A disco for will cost you £10K minimum.. You have saved yourself £5000..... thats a nice holiday in France for me and family.

@lyletregoning4717 5 жыл бұрын

powerfulukltd sounds like a good idea. How much roughly would it be to fit, a disco 4 bumper, lights grill and rear lights?

@MANCLOCK365 5 жыл бұрын

Some people like the Journey....