How To Remove Eternabond Tape

Рет қаралды 148,005

Күн бұрын

Eternabond tape CAN be removed if necessary. Here is a demonstration of the easiest and quickest way I’ve found to remove eternabond tape from your RV roof. I’ve done it several times and this method works the best.
** I always have a roll of Eternabond on hand, you should too **
WHERE TO BUY ETERNABOND TAPE (Amazon Affiliate Links)
Eternabond Tape - multiple sizes (amzn.to/2p5stY5)
Eternabond Double Stick Tape - multiple sizes (amzn.to/2CRNkrR)
HOW I USE ETERNABOND TAPE (Video Playlist)
• Eternabond Tape RV App...
MORE ABOUT REMOVING ETERNABOND TAPE
(Read the full article here: rvwithtito.com/articles/how-to...)
Eternabond tape is used by RV, travel trailer, and camper van owners to repair leaks and seal roof openings, roof seams, window seams and storage compartments. The sticky material creates a watertight seal.
I have also used Eternabond to securely mount flexible solar panels, antenna mounts and electrical boxes to the roof of my RV. It holds securely and can be a viable alternative to drilling holes and screws into your RV roof.
There are times, when you may need to partially or completely remove the Eternabond tape. I have tried several techniques and chemicals to do this.
Here are the steps I follow to remove Eternabond tape:
1. Heat the eternabond tape with a hair dryer or heat gun to soften it up
2. Tear back the outer coating of the tape
3. Use a utility knife to cut back the stringy sticky material as you pull off the outer coating
4. Heat up the remaining stick material with the hair dryer
5. Scrape as much of the stick material away with a plastic scraper (be careful not to puncture the surface of your roof)
6. Apply turpentine to a rag and wipe away the remaining residue
#rvwithtito #rvdiy #rvmaintenance
DISCLAIMER
The opinions expressed in our videos are our own or from a contributor. Before taking on any project or making a large purchase, we recommend you do your own research and consult a professional for advice. We are NOT liable for any damage to your RV or injury incurred as a result of following our tips, advice or instructions. We are not RV professionals or certified technicians. We are simply RV owners who work on our own RVs and have a desire to share what we learn with others. Be responsible and know your limits.
AFFILIATE DISCLAIMER
This video may include links to merchants with affilliate programs who pay us a commission on purchases made or actions taken after clicking the link. We are a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases.

Пікірлер: 228

@miketomas8564 5 жыл бұрын

HEY! THANKS MAN!! Everyone shows how to apply this stuff, but your the first I've seen who has demonstrated how to remove it! And I appreciate your efforts to try several cleaning liquids for cleanup!

@mjremy2605 10 ай бұрын

Excellent. Great demo, thank you Tito. A word of caution to you married men out there: The Rusk hair dryer is a special ionized hair dryer that runs $60 - $160 plus tax. If you think this is not worth it, try using a cheap hair dryer and watch how your hair flies with static electricity. They also die young. The Wagner heat gun costs $22 and delivers much more heat than air. If you value your marriage, use that instead. If my husband used my pricey hair dryer, it would feel to me, like I used his Mercedes for construction work. The marriage will be on rocky ground and you would be in the dog house for a while living on fast food.

@stevekiemele995 5 жыл бұрын

Between scraping and solvent, use duct tape. Press the duct tape down on the EB residue and pull straight back off. The duct tape will lift off a lot of the EB residue. Use fresh duct tape as needed. The duct tape method really helps on rough surfaces and even fabrics and carpet. I was able to remove some EB “sticky stuff” from my carpet.

@RVwithTito 5 жыл бұрын

Excellent tip and definitely worth a try 👍👍

@billcrane2444 11 ай бұрын

Gorilla tape worked great ! I used it on the door panel of a car with a textured surface warming it with a hair dryer on low setting then 'plucking' the residue off with Gorilla tape. It all came off easily with no need for a solvent. It was perfectly clean. Thanks for the video and thanks for the useful comments about using duct tape. Job done and no mess.

@terryt2910 2 жыл бұрын

Thank you. This tutorial saved me a lot of experimenting and error. One thing to mentions, the solvents you suggested, and others, need eye protection and adequate ventilation.

@markchudley8994 5 жыл бұрын

Excellent video! We used Eternabond tape on the roof of our Class B RV, and this information is perfect! Thanks Brian.

@DarkMandalore 3 жыл бұрын

Just used this trick with Flex Tape and it absolutely works. Thank you for saving me a lot of time!

@CDVEDROD 4 жыл бұрын

Thank you for such clear and well thought out directions! You would make a great shop teacher.

@klouism1 5 жыл бұрын

Great video. You have experimented and saved others many hours of work. Stay well & happy.

@carlbrothers 5 жыл бұрын

I recently had to use Eternabond tape to repair some leaky seams on my front cap. The tape worked awesome in stopping the leaks, but looks awful on the side of my camper. I have been loathing the removal task that lies ahead, so this helps out a lot.

@10mileroadie 4 жыл бұрын

I used a Bissel Steam Shot (great company that benefits shelter animals!) to remove. worked like a charm. no putty knife required.

@mickichikwinya5519 5 жыл бұрын

Best removal I've seen thus far. Thanks!

@RVwithTito 5 жыл бұрын

You're welcome!!

@RVHabit 5 жыл бұрын

Eternabond tape is certainly a great product for hundreds of DIY uses and certainly RV projects. Removing it is possible but I have done it and it is a slow and steady process. Heat is definitely the trick to get the bulk of it up. Great video as usual.

@RVwithTito 5 жыл бұрын

Yes. It certainly pays to take your time and not get too agressive. Thanks!

@carnalesmuff 5 жыл бұрын

Why even use it in the first place? there is dicor comes off better don't it?

@John-eq8cu 5 жыл бұрын

About cleaning the residue - one thing you didn't mention is that petroleum distillates should absolutely not be used on TPO roofs, as it will basically destroy it. So gasoline is absolutely a no-no. I was surprised that the Eternabond web site, which suggests the same techniques as you do (loosen with heat, etc.) they also don't mention the dangers of using certain solvents on RV roofing materials.

@MrBuffaluffagus 2 жыл бұрын

Man, what a great video! I used a plastic razor blade to scrape the left behind residue and followed that up with mineral spirits in a microfiber applicator block and it all came right off. I thought I had ruined my RV by putting this tape on the paint to cover a broken window, but it was a breeze.

@RVwithTito 2 жыл бұрын

Thanks. 😊 Glad it helped.

@70ixlr86 Ай бұрын

Very well produced Video! TY so much. " Gas " Never would of guessed, amazing. Thanks for doing the research for us. Eterna bond in the 1 foot wide 50 foot roll is about to become a close friend to our very corroded aluminum roof. I know its a temp fix and will lock in moisture, but the 82 over hang needs a complete rebuild in the near future, but I just retired and would like to find the rolled aluminum before I start. lol

@michaeldoherty2289 4 жыл бұрын

Love that analogy that it looks like a snail on the side of an aquarium. Perfect description.

@Jim.Hummel 5 жыл бұрын

Great info!!! Thanks! So good to know that eternity is not necessarily eternal !!!

@tanyakc77 9 ай бұрын

im about to add it to my fence to close a gap where the panels overlap for my dog to stop attacking neighbours dog and stop cutting her nose up glad i found this video incase i need to remove it

@RVwithTito 9 ай бұрын

Great! Here's another technique kzfaq.info2Cwe4P3puro?feature=share

@bjohnsonsv 4 жыл бұрын

I love your videos, Brian. They are so helpful. When my flexible solar panel prematurely failed after less than a year, I was dismayed about how hard removing the eternabond would be. I am less dismayed now...though not less annoyed at the failed solar panel. :(

@RVwithTito 4 жыл бұрын

Yeah. It's still a sticky process, but certainly doable. I'm fortunate having several extra solar panels for testing and educational purposes. Still, failures are a real bummer and I feel your pain. This is why I don't permanently mount them anymore with eternabond. I need them to be easily removable. Thanks for the comment.

@bjohnsonsv 4 жыл бұрын

@@RVwithTito Thanks - lesson learned about mounting in a less permanent manner next time.

@bounderchris Жыл бұрын

I’ve seen those soft solar panels burn the Rv roof when they go

@madhabitz 3 жыл бұрын

For most any kind of sticky glue, just about any kind of oil should work, i.e. Pam, WD-40, etc. It won't work as fast as your gasoline idea and you might have to let it sit for a bit, but I would be surprised if the oil didn't work. Love your videos - thank you!

@mjmorro7757 5 жыл бұрын

Okay, I'm heading to the orange store for some terpintine. Thanks for the great video!!

@RVwithTito 5 жыл бұрын

Yup. That's where I got it.

@childofthe60s100 26 күн бұрын

Very VERY useful!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@RVwithTito 25 күн бұрын

Great. Check this short video out also. kzfaq.info2Cwe4P3puro?si=AKwoxqP4ferSYaBi

@howardshurst1302 2 жыл бұрын

Have you worked with the Dicor Rubber roof repair membrane? I have some damage from a tree to my EDPM and was wondering which would be better the membrane or the Eternabond? Great video by the way .Thanks You

@miwei7898 5 жыл бұрын

Would using a hypodermic and solution injection into several areas might it get the same result? Without scraping.

@knutblaise9437 5 жыл бұрын

Great tip. Have you tried this technique for removing Dicor?

@jimbertrand2499 2 жыл бұрын

Hey Tito! What if you have a rubber roof material? I was told to not use petroleum based products on rubber or it could soften and weaken the rubber roof material... Thanks, Jim

@vendright 5 жыл бұрын

Thank you, all great information

@familiamotarica6616 2 жыл бұрын

Do you know if Eternabond sticks to unsanded wood? With primer perhaps? Thanks in advance

@jimmydeen58 5 жыл бұрын

Great Video Thanks For The Tip...

@geebonzo 5 жыл бұрын

I have a roll of EB lying around. I did not realize the top part would peel off the adhesives, just with heat. Thanks.

@RVwithTito 5 жыл бұрын

Yup. It does. That's actually the technique recommended by Eternabond.

@rrstites 2 жыл бұрын

About a dozen years ago I put Eternabond Tape over all the seams on the roof of my RV and now the plastic top is delaminating from the adhesive/sealing stuff. I was careful to super clean the surfaces before applying the tape and it is still solidly stuck onto the places I put it. For a bit of background, the roof on my RV is aircraft aluminum, not fiberglass or the rubberized stuff. Based on my observations, I wouldn't use Eternabond as my primary joint sealer for the roof of my RV. Instead, I'd go with self leveling lap sealer and then after that has completely cured apply Eternabond or an equivalent product. As a final thought: A hair dryer might be okay for softening up this tape on clear plastic - I found that I needed to use my heat gun on its highest setting along with a metal putty knife to take up the majority of the Eternabond tape. I needed to replace a roof vent and this is what I found that worked best for me. Cheers.

@asaelrodriguez9585 5 жыл бұрын

Thank you this helped a lot it also works for flex tape

@HighCountryRambler 3 жыл бұрын

Good video, gasoline is the number one tool in the box for me. Lighter fluid also works well for that kind of stuff. Thanks

@RVwithTito 3 жыл бұрын

Great tip! Thanks.

@daveandcherylbarker8261 5 жыл бұрын

Great tips on removing Eternabond tape! What about getting the residue off a rubber roof? I had to use it to seal up damage from a hail storm in Wyoming but now I have the sticky residue left. Thanks

@RVwithTito 5 жыл бұрын

Same process for rubber roof. I have a rubber roof. Just take your time and be careful not to puncture the membrane other separate it from your roof.

@travisweedon8122 5 жыл бұрын

I worry about using strong solvents on a fiberglass RV roof. I have to remove some EB to get to the holes I covered up with it. Will goof off work the same?

@RVwithTito 5 жыл бұрын

I haven't had good luck with Goof Off. Mineral spirits and turpentine are less harmful, but try out on a small spot first. You can clean it off really well when you're done.

@TheSonsOfSimon 3 жыл бұрын

Would thebgasolije game the EPDM rubber roofing material on an RV?

@tommccarthy8150 Жыл бұрын

Tito, like the vid. Your style is cool, and you crack me up! Yeah, the gasoline is a little extreme. I'll give it a shot anyway, just for the heck of it. Since we're into the chemical thing here, I'll mention that I had great success removing gooey stuff (after removing a BUNCH of decals) with Professional-Grade Goof Off.

@RVwithTito Жыл бұрын

Thanks for the tip.

@dkuhlman2282 5 жыл бұрын

I've used Orange oil to remove that residue. Works well and is fairly non toxic. Rinse with water afterwards.

@RVwithTito 5 жыл бұрын

Thanks for the tip.

@dereksmith5551 2 жыл бұрын

Great video my friend !

@campgoerOne 7 ай бұрын

Hey Tito! I bought an older fiberglass truck shell and the carpet on the ceiling was bad. I took it all off, pressure washed it and paintef the inside with Henry's silicone. 😮 I doidnt realize nothing adhere to silicone. Any ideas on how to remove the Henry's silicone? Thank you!

@MrZachzippo 5 жыл бұрын

Curious if you have tried rubbing alcohol

@joewolters2399 4 жыл бұрын

Do you think this would work on a TPO roof?

@Yukonjackman1 4 жыл бұрын

Will the sticker stuff just dry out and flake off in our Arizona 300 days of sunshine

@nonrevhogan8938 5 жыл бұрын

Would like to see how that works with some coming off the RV roof after being on there for a couple years. Sounds like you have done it. How did the RV roof look after that process?

@RVwithTito 5 жыл бұрын

I've had to remove a couple of small sections. Looks nice and clean when done. I don't think it matters whether it's been a couple months or a couple years.

@nh603 5 жыл бұрын

Great info

@tatiaxyt8564 3 жыл бұрын

praying this works on Gorilla Waterproof Patch and Seal Tape I used it all over my boat to get us through the winter, now it's time to make the repairs and I can't get the darn stuff off!!

@lakeend5702 5 жыл бұрын

Thanks dude ....great video

@RVwithTito 5 жыл бұрын

Thanks! Glad you liked it.

@davidbabcock5172 Жыл бұрын

Did you try Goo Be Gone? It’s made to remove the sticky residue from tape.

@MTMiser 2 жыл бұрын

Great video and just the information I was looking for. Do you happen to know if this will work for removing Dicor? My sister has Dicor on the roof of her RV and it's old enough now that it has started to crack, and she's now got a roof leak. I want to remove the Dicor and replace it with Eternabond. I've used Eternabond for many years and it is great stuff.

@RVwithTito 2 жыл бұрын

Yes. I've removed lots of dicor too with a heat gun, putty knife and mineral spirits. Maybe this will help kzfaq.info/get/bejne/j79jntB036qxk30.html

@shanemwood 3 жыл бұрын

Excellent video tutorial. Thank you. By the way, you look and sound exactly like a friend of mine. I'd swear you were twins. :D

@RVwithTito 3 жыл бұрын

Who knows...I might have a missing twin out there :)

@donspoor8367 5 жыл бұрын

Do you know if you can place that tape over Dicor lap sealant?

@RVwithTito 5 жыл бұрын

Yes. I have done exactly that to give my seals some extra protection.

@saulfurtado3918 5 жыл бұрын

Boa noite. Gostei do finalzinho, 👍🏽 Rsrsrs Mt criativo

@paultweedley2026 5 ай бұрын

Would this be a similar process with aluminium butyl tape? Thanks

@Bruins19able 3 жыл бұрын

Just watched this video. Any idea the effect gasoline would have on the existing roof, be it TPO or EPDM?

@RVwithTito 3 жыл бұрын

Can't say for sure but gas does evaporate very fast. All you really need is a heat gun and some mineral spirits. Video coming soon.

@sabrinawardharrison8904 Жыл бұрын

this is so great and helpful. Thank you so much ! 😊What about on painted house walls interior?

@RVwithTito Жыл бұрын

Here are more tips that may help with that kzfaq.info/get/bejne/j79jntB036qxk30.html

@69indigoblue 3 жыл бұрын

Thanks for all the helpful infos. Just wondering if that technique is also suitabel for Eternabond sticking on the roof of the van. Scratching with plastic or Terpentine might ruin the lack finish...

@RVwithTito 3 жыл бұрын

Heat and mineral spirits then.

@69indigoblue 3 жыл бұрын

@@RVwithTito Ok thanks, I guess mineral spirits are called "Waschbenzin" or "Terpentinersatz" in Germany...

@RVwithTito 3 жыл бұрын

@@69indigoblue Good to know :)

@vincepanico2223 5 жыл бұрын

Thanks can you help with backup cams with wire?Vince panico

@nikmills 4 жыл бұрын

Doesn't gasoline start to melt the epdm (if that's your roof's surface)?

@FriendlyCommentor Жыл бұрын

Goo gone also works. First you hit it with the heat gun. Then pull the tape off with a scraper trying to remove as much as possible with this step. Finally goo gone will eliminate any residue.

@markkazav 2 жыл бұрын

Its helped!!! Turpentine!!!

@MrFordguy73 Жыл бұрын

Are there other brands other than eterna bond that are good? I found a few as I'm looking at sealing All the way down both sides over my weather stripping and was looking for a little bit cheaper alternative, but don't want to put something on there that's no good.

@RVwithTito Жыл бұрын

I've used the Gorrilla tape version that you can buy at Home Depot. Seems to be identical, but fewer size options.

@Kameltoe 3 жыл бұрын

hey will eternabond stick safely to the 100 percent silicone roof and secure my panels? I know that stuff is non stick.

@RVwithTito 3 жыл бұрын

I don't know how well it would. I would check the Eternabond website to be sure.

@jasonerickson1033 2 жыл бұрын

What do you use for a cleaner on the dicor before you put this down on the edges of my travel trailer

@RVwithTito 2 жыл бұрын

Rubbing alcohol works

@SalsaChips11 Жыл бұрын

Does turpentine strip off the auto paint, too?

@darrylm3627 3 жыл бұрын

Good Stuff👍🏿

@arriagada1957 5 жыл бұрын

Tito Can i use a heat gun in the low..?

@RVwithTito 5 жыл бұрын

You could. But yeah, on low. You don't have to get the tape too hot, just warm it up a bit. A heat gun has a bit more focussed heat and may get too hot which could affect the underlying glue on the rubber roof. Use your best judgement.

@thefix2573 Ай бұрын

My go to solvent is lacquer thinner, but I'm a cabinet guy so it's what I have.

@arlendavis 4 жыл бұрын

Have you tried Lacquer thinner? It works on most glues. Won't stink like gas once it has dried.

@RVwithTito 4 жыл бұрын

Haven't tried it, but I will. Thx.

@gregorymann3431 3 жыл бұрын

Good stuff

@thesurvivalist. 5 жыл бұрын

Come in a 48" width too, you have to special order it!

@michaeldoherty2289 4 жыл бұрын

I'll bet that is a pricey piece of tape!

@DavidWhite 5 жыл бұрын

Brian, I have one of those multi-tools that vibrate, and they work great. I use the scraper attachment on mine. I have a metal roof so I do not have to worry about cutting through a rubber membrane. Oh did you ask Melissa for her permission to use that hair dryer? It is always easier to ask for forgiveness 😁😁😁

@RVwithTito 5 жыл бұрын

Didn't ask. That's the hair dryer she keeps in the RV only. So I consider it part tool part hair dryer 😀

@Euskaltel0526 2 ай бұрын

What process do you recommend removal from a TPO soft surface?

@RVwithTito 2 ай бұрын

This has worked best for me - kzfaq.info2Cwe4P3puro?feature=share

@tashiannathomas5506 4 жыл бұрын

Thank you! I had this tape holding my car together but its been so hot recently that its melting off. Wish me luck🤞🏾😬

@RVwithTito 4 жыл бұрын

Hope the car isn't falling apart :)

@rickwheeler7480 Жыл бұрын

Watch :::::::::: Why you SHOULDN'T Eternabond tape your RV roof! California RV Specialists - Dustin Simpson 4.84K subscribers Subscribed

@corneliuslau8094 3 ай бұрын

Hi Brian, I am going to remove those tape from a painted wall. How can I clear the glue without damaging the painted surface? Thanks.

@RVwithTito 3 ай бұрын

Try this kzfaq.info2Cwe4P3puro?si=Y6ra9D58OSAlE4iL

@ericcunningham1138 5 жыл бұрын

Thanks for video. I looks like u could just scrape as u peel it off too

@RVwithTito 5 жыл бұрын

Yes. Several options once you heat it up.

@andrewwalsh2716 5 күн бұрын

what about EternaBond doublestick between RV vent roof square on roof how remove?

@janX9 Ай бұрын

I've got this tape on my slides. It doesn't look too bad, but some spots are loose and coming off. Can I just clean up the existing tape, leave it on and tape over the old tape?

@RVwithTito Ай бұрын

Remove the outer white layer first leaving the gray sticky stuff. Then tape over the gray stuff. That's what the manufacturer recommends anyway. Good luck.

@janX9 Ай бұрын

@@RVwithTito cool, thanks for the info.

@lisablake4237 3 жыл бұрын

I'm in Alaska, how does it respond to -25 degree winters?

@RVwithTito 3 жыл бұрын

Should be fine. It's usually the heat that softens it up.

@jerryberkel8421 3 жыл бұрын

Wd40 works to remove 5200......I wonder if it would work to remove this goo?

@rolandreutimann5610 5 жыл бұрын

Hello Tito Can you tell me, where we can buy this Eternabond? I only can find it in Ebay and Amazon. But which company produce this Tape? I hope you can help me.

@RVwithTito 5 жыл бұрын

I've only purchased it from Amazon.

@theswartz4218 4 жыл бұрын

This works on flex tape as well.

@melvinwilcox1316 11 ай бұрын

Actually, PB Blaster will do a wipe-on-wipe-off job with the residue. Then clean up with citrus cleaner & water.

@richardfettig5974 3 жыл бұрын

lacquer thinner works find as well

@RVwithTito 3 жыл бұрын

Thanks for the tip!

@JJ-pf7qo Жыл бұрын

Googone is best for anything sticky like that

@Jim-hk6rd 4 жыл бұрын

you could use white gas for camp stoves it's gasoline with out the odor added

@vibrolax 3 жыл бұрын

Camp stove fuel, a.k.a. white gas, is naptha, not gasoline.

@jamiebutler1762 2 жыл бұрын

Probably a little tougher when the tape is years old and on a rubber roof. But if I ever do need to remove some I will try this.

@RVwithTito 2 жыл бұрын

I posted a video recently to show you how easy it is to remove with a heat gun. Check it out: kzfaq.info/get/bejne/j79jntB036qxk30.html

@tedwebster1606 Жыл бұрын

Naptha works great too, and leaves no residue when it dries.

@scenicdriveways6708 5 жыл бұрын

Yeah , but will using heat effect the glue under the rubber roof? Will any of those chemicals hurt your rubber roof?

@falcon7350 5 жыл бұрын

yes and yes it well giving what type of roof you have . TPO loves to just be pulled up . in the end there really is no good way of doing this and thats what the RV makers want

@RVwithTito 5 жыл бұрын

I suppose it could be an issue if you really heat it up. I usually just get it warm enough to soften the tape. It doesn't take much. Take it slow and don't be too agressive and it should be ok. I've used a bunch of solvents on my rubber roof and haven't had an issue. I'm sure to wipe it down and clean it once the goop is up.

@lastname3924 4 жыл бұрын

You should put tissue in the center of the patch and submerge it in water for however long and observe.

@Yukonjackman1 5 жыл бұрын

we live in Arizona so heat isn't a problem

@trongod2000 5 жыл бұрын

You've really confused me by first saying you take the stuff off with gas but later saying you used it to patch a gas leak. How can that be?

@RVwithTito 5 жыл бұрын

I wondered if someone would pick up on that. Thumbs up for paying attention 👍You're right, the Eternabond was not the best option for that repair and was starting to loose it's effectiveness after a couple weeks. It's all I had on hand. I literally patched it at a rest stop.

@FunPlacesToFly 5 жыл бұрын

MEK works good too.

@RVwithTito 5 жыл бұрын

Haven't tried that. Thanks. Is MEK primarily acetone?

@Vansaircraftbuilders 5 жыл бұрын

Not sure. But when removing old "baked on" vinyl decals, it helped with the underlying goo glue, making it easier to remove. I used it when nothing else was working to remove these really old decals.

@FunPlacesToFly 5 жыл бұрын

Oops. Sorry. Answered with the wrong account. I am also VansAircraftBuilders. Love your VIDEOS!

@lesliewarren6481 5 жыл бұрын

How would you remove silicone from around a window?

@RVwithTito 5 жыл бұрын

I think that depends on whether you're simply resealing it, or removing the window. To reseal, I usually cut the bulk away with a sharp utility knife so I have a nice smooth surface to reseal.

@lesliewarren6481 5 жыл бұрын

RVwithTito removing the window

@michaelbyrd2043 3 жыл бұрын

Baby oil works great to

@pezjme 5 жыл бұрын

rubbing alcohol works

@merhanekordy7227 2 жыл бұрын

Can it work on a wall

@merhanekordy7227 2 жыл бұрын

RV with Tito DIY

@1951Roy 5 жыл бұрын

Do you think WD40 could have worked on last step? Great video thanks for your time.

@Mnfish22 5 жыл бұрын

Wouldn't WD40 leave an oil residue? What if you want to replace the tape with new tape. Probably wouldn't stick? I've used acetone and it worked great! But be careful on painted surfaces not to use too much. Try to get as much tape off with hair dryer and scrapper as possible. Best way is to heat and scrape. Most will come off that way

@RVwithTito 5 жыл бұрын

WD40 does work good for goo/sticky removal, but I haven't used it for this. It would probably work though. Plus, a can of turpentine or mineral spirits will go a lot further for around $3.

@marketshare5273 5 жыл бұрын

Leave it up to Tito to school Us all. Have you tried denatured alcohol give that a try please i’ve used it to get rid of all kinds of nasty 3M adhesive 👍👊😎

@RVwithTito 5 жыл бұрын

I haven't used it for this. I typically use it to clean the surface before applying the Eternabond though. If I do another test, then I'll try it out.