How to Remove Front Bumper on 97-01 Toyota Camry

Рет қаралды 83,725

1A Auto: Repair Tips & Secrets Only Mechanics Know

8 жыл бұрын

In the video, 1A Auto shows how to replace a cracked, scratched, or broken front bumper cover. The video is applicable to the 97, 98, 99 Toyota Camry
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oakw/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oakw/1AXAA00013
• 10mm Socket 1aau.to/oXT/1AXAA00017
• Ratchet 1aau.to/oam4/1AXAA00016
• Socket Extensions 1aau.to/o6V/1AXAA00015
• Painter's Tape
• Floor Jack 1aau.to/oui/1AXAA00068
• Jack Stands 1aau.to/oux/1AXAA00065
For More Info visit us at 1aau.to/h/bj8/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 66

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@stephenburling743 4 жыл бұрын

Thank you for this video. I needed to replace a bumper cover on my 1997 Camry after it got damaged. Your video was a big help. Was able to fix it for about 120.00 dollars with wrecking yard parts. Thanks again.

@Nikkk6969 4 жыл бұрын

Thanks!! Your channel comes up most uninstall videos I’ve looked up for my Camry and your content and directions are very straightforward and easy to follow! 10/10

@MrMacky-co6zn Ай бұрын

Excellent job of showing fasteners

@nikkin6907 2 жыл бұрын

Triplet awesome tutorial. Thanks alot for sharing your wisdom about this You made the mystical venture super possible. 💯💯💯

@pavellapik2796 2 жыл бұрын

MAN THIS GUY IS A BLESSING. THANKS FOR THE VIDEO. 👍👍👍

@edwardlisk3283 7 жыл бұрын

Very clear on every step to do.

@1AAuto 7 жыл бұрын

+Edward Lisk Thanks for watching. 1aauto.com

@call_me_cooper 2 жыл бұрын

Dang. This was incredibly helpful!! Thank you.

@SonLyAu 7 жыл бұрын

GREAT HELP THANK YOU

@yutianliang6050 4 жыл бұрын

very clear video ,give me lots help.Thank you very much!

@1AAuto 4 жыл бұрын

+yutian Liang Thanks for checking us out! 1AAuto.com

@mannymacias1634 5 жыл бұрын

Thank you for this video!

@AquariumCop 7 жыл бұрын

thanks for the video! great video and great place to order from!

@michaeldunagan8268 Жыл бұрын

@3:24 Exactly what I was looking for. That clip at the edge of the bumper cover under the wheel-well: my clip was so corroded and rusted on my 1999 Solara I figured that it was just riveted in to place. Good to know that I can just screw the new bumper cover on.

@shaenebuffster 4 жыл бұрын

Many THANKS

@xman6632 7 жыл бұрын

Great video. Thank you!

@xman6632 7 жыл бұрын

1A Auto Parts I changed it in 10 minutes with your help.👍

@jsmcguireIII 5 жыл бұрын

seems like you'd have plenty of those plastic clips on hand. still seeing a gap on the right side but not on left. Is the fastening point there bent? Thanks again for the video 1A.

@Bostonclassics1 7 жыл бұрын

Excellent - thank you

@1AAuto 7 жыл бұрын

You're welcome! Glad that you found it helpful. Buy your auto parts from 1AAuto.com?KZfaq&CTA%20Comment&ATony

@mendezavala4817 Жыл бұрын

Good job 👏

@danielb200 2 жыл бұрын

Would this help me fix my front bumper sagging on the left side? If I just took it off and put it back on?

@kurtisl1472 Жыл бұрын

Hey mate i need a new bumber on my 1997 will a 2000 front bumper and light fit?

@ghorbanalirazmjou8591 Ай бұрын

Thanks ❤

@jillrademacher7642 4 жыл бұрын

I am trying to do this but I can not pull the front bumper cover off because the metal piece that is connecting it from the car to the bumper cover has a lip and it is locked in. This is on my 97 camry. This is by the headlight.

@UnOrthodox_Christian 3 жыл бұрын

Thanks for the video. I'm replacing my bumper on my 2000 toyota camry

@1AAuto 3 жыл бұрын

+Devin Cortez Thanks for the feedback!

@Aaron-xq4gl 4 жыл бұрын

Is that a forward lift?

@WV591 6 жыл бұрын

wish you would do one on 1998 camry rear bumper

@jovansosa 4 жыл бұрын

98 should be easy. Check Toyota Nation

@jessiepratts9519 3 жыл бұрын

Thank u

@1AAuto 3 жыл бұрын

+Jessie Pratts Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@sben125 4 жыл бұрын

Do the xle and cle have different sizes? I wanna buy a salvage bumper but I can't find an xle anywhere

@1AAuto 4 жыл бұрын

+Sade Benjamin We do not currently sell the bumper for your vehicle so I am unable to determine if the part is only made for specific trim models. You would be able to contact your dealer with your VIN and they can provide this information to you. Thanks for watching.

@megezerlopez4798 6 жыл бұрын

I want video on rear bumper please!!!!!

@dareyusvalencia658 4 жыл бұрын

What is the name of white containers located between the bumper and those side covers behind the bumper ? Are they important ?

@1AAuto 4 жыл бұрын

+Dareyus Valencia Thanks for watching! Everything under the hood is there for a reason, so it is all important. The large one appears to be for the washer fluid. The other ones will contain things like coolant or brake fluid.

@jasonahead4361 2 жыл бұрын

Thanks, fellas, gals

@wellnesspathforme6236 4 жыл бұрын

I'm trying to do this on a 1994 Toyota Celica, but I'm running into two problems. First, there are two plastic Phillips "screws" on the top bolting the front bumper to the frame almost right above the condenser, but they don't unscrew. There is no "give," and they are sitting flush inside of what I will call a grommet. IOW, they don't look like they should be pried, but they don't unscrew. Second, Even after I remove the side fasteners holding the bumper on to the side of the vehicle, the connection between the two doesn't want to separate. There are two screw "spindles" that protrude from the bumper through holes on the front quarter panels, but I don't think they are keeping the two pieces from separating. Do you, or anyone else, have any ideas? TIA...

@1AAuto 4 жыл бұрын

+Wellness Path For Me We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com

@howdypartner5322 3 жыл бұрын

Is this basically the same for a 1996? I know the grill is a separate piece.

@1AAuto 3 жыл бұрын

+Hello Verymuch This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c

@LeahHeartKitty 4 жыл бұрын

Please can you do the rear bumper on the same exact car. Please !!!

@1AAuto 4 жыл бұрын

+Meli Cas We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com

@rebellion6468 Жыл бұрын

I have a question for everyone. Can we put a 2000 camry front and back bumpers on a 98 camry?

@fabianm-v2446 4 жыл бұрын

Do yall have the bumper and styrofoam?

@1AAuto 4 жыл бұрын

+Fabian M-V We do not carry it, thanks for checking us out!

@gsteel98 7 жыл бұрын

just to confirm bit this is rhe exact same steps as a 1997 Toyota camry correct?

@1AAuto 7 жыл бұрын

It may be the same or a similar procedure on that vehicle. 1aauto.com

@1AAuto 7 жыл бұрын

+gsteel98 Thank you for watching. This process is the same for the 1997 Camry. 1aauto.com

@gsteel98 7 жыл бұрын

+1A Auto Parts it helped greatly, thank you

@marthajaime1031 5 жыл бұрын

Would this work on a 96?

@1AAuto 5 жыл бұрын

+Martha Jaime It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com

@finaltheorygames1781 3 жыл бұрын

I always knew that painters tape was the solution.

@tylerj44 5 жыл бұрын

Are the steps similar for removing the front bumper of a 1995 / 1996 toyota camry?

@1AAuto 5 жыл бұрын

+Tyler Jacobsen At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task.

@gsteel98 5 жыл бұрын

So this wont work on a 2000?

@1AAuto 5 жыл бұрын

We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. +gsteel98

@sharpie132 5 жыл бұрын

Can I install a 2000 bumper on a 1998

@1AAuto 5 жыл бұрын

+sharpie132 Probably not. Take measurements and double check size. Even if they are the same, the bolt holes might be different

@W0RLDSSMALLESTVI0LIN 5 жыл бұрын

No, the entire front end is different on the 00-01 models it will not work.

@wislp9382 4 жыл бұрын

do i need the styrofoam?

@1AAuto 4 жыл бұрын

+WISLP The foam is there to provide structural support behind the cover. Without it, the cover may deform or rattle while driving. Thanks for checking us out! 1AAuto.com

@1AAuto 4 жыл бұрын

+WISLP Vehicles came with foam behind the bumper cover from the factory. Thanks for checking us out! 1AAuto.com