How To Remove Front Grill WITH Sensor - 3rd Gen Tacoma

No video

How To Remove Front Grill WITH Sensor - 3rd Gen Tacoma - Step By Step

Рет қаралды 55,154

Күн бұрын

If you are looking for a step by step video on how to remove a grill with the sensor from your 2016, 2017, 2018, 2019, ect Toyota Tacoma then you are at the right place. I ended up switched out my grill for the Limited grill for many reasons. I think it looks really nice with the white and there are too many people switching there grills out for the TRD Pro grill. Please comment if you have anymore questions.
TRD PRO Grill: amzn.to/2OIq4OZ
Solid toolset: amzn.to/2Xd8mHz
Donate $1 if you enjoy these videos: PayPal.Me/justi...
Please support the channel by subscribing. goo.gl/nD3r4v
Hello Everyone, my name is Justin White. Ever since I was young I was always fascinated with how things work. Wherever I am going, I constantly look at how and why something is working the way it is. With my KZfaq channel, I am able to give accurate and credible videos to the viewers. Cluengineer or "Clue in engineer" is a guide to a solution. Many of my videos are how to, fix it, and explanation. Come join the community and subscribe, like, and share.

Пікірлер: 38

@robotecarom 3 жыл бұрын

Thanks for the attention to detail and step by step instructions. I’ve watched a few grill removal videos and this was the best one by far.

@mikel.3332 4 жыл бұрын

Helpful video! Thanks Spiderman

@92813justin 4 жыл бұрын

You are welcome!

@jamesspencer406 4 жыл бұрын

Good helpful tips thanks plan to do this wknd

@92813justin 4 жыл бұрын

Thank you! I hope it went smooth for you

@firnatine67 19 күн бұрын

Can that sensor be mounted to the Off Road Grille?

@billritchie5147 Жыл бұрын

Good job on the video.. Thanks

@mikepenik8594 7 ай бұрын

Wondering about the clips to remove the chrome bezel and original grille? Does the chrome bezel need to be removed first. Also any suggestion for the clips they seem difficult

@wb4514 Жыл бұрын

Thanks for not adding the crappy music.

@92813justin 11 ай бұрын

Not a problem!

@Lkom24 Жыл бұрын

Thanks 4the helpbut those retaining clips could have been pushed out instead of cutting..i learned that the hard way😂

@JosueDiaz-yd7hw 3 жыл бұрын

What’s the part number of this cable connector into the grill to radar sensor ?

@chardinaeandcharlevin8482 5 жыл бұрын

Hi. Can you remove the Toyota logo to be transferred to a new grill? Thanks!

@92813justin 4 жыл бұрын

I believe so

@nativehawaiian2871 4 жыл бұрын

i also want to add if you know any steps on taking out the toyota logo? if not it’s fine, and thanks!

@samanthascarlton 4 жыл бұрын

How do you know if you have a sensor in front? I have a stock 2017 Tacoma Limited, just got it and looking to do some easy mods. Thanks for the video, it's extremely helpful.

@92813justin 4 жыл бұрын

nitara, the grill will have the wires attached to the grill. But 2018 was the first year Tacoma’s had the sensors. You can still change out your grill.

@bandidill077 Жыл бұрын

I had a 2017 and has no sensors, I swap my grill and no problem, tacomas with sensors on grills are 2018 and up.

@mustangecoboosthpp3869 9 ай бұрын

Put a towel down so you're not laying the paint work on a hard surface that can scratch the paint.

@ICanopenerI Жыл бұрын

How do you not have 4 clips on the bottom of the grill? I am so confused haha. So many people are going to break those 4 clips!

@creutzml Жыл бұрын

Since the sensor lies behind the front badge, is there anyway to take the badging apart? The goal would be to remove the chrome of the Toyota logo, but inside of the plastic shield... I really don't want to just tint over the front plastic.

@parkervicich4331 Жыл бұрын

Hey, did you ever figure this out I too want to do this but don’t want to just simply tint the shield cover

@creutzml Жыл бұрын

@@parkervicich4331 nah, never found a way, and just went with a TRD Bro grille instead lol

@briandeyoung5574 3 жыл бұрын

My 2021 front sensor isn't working even with the washer trick. Any suggestions Thanks

@92813justin 3 жыл бұрын

Did you lift your truck? if so, you need to make sure it has the same rake. If not, bring it to the dealer.

@christiancerda4328 3 жыл бұрын

seeing that the front grill is kinda exposed, is it safe if it gets water in there from a car wash cause of the sensor

@92813justin 3 жыл бұрын

I would not power wash the sensor, but the engineers should have designed it to survive in all types of weather

@ChrisDriven 3 жыл бұрын

I’m not looking forward to seeing messages about my sensor disconnected cuz I am going to replace the Toyota logo with a custom one that of course won’t be allowed to have the sensor

@kennethjames8314 2 жыл бұрын

What about sensor recalibration?

@92813justin 2 жыл бұрын

There is no sensor recalibration because it is the exact same grill from Toyota except the looks are different

@kennethjames8314 2 жыл бұрын

@@92813justin I have a bull bar on the front of the truck. So I couldn't do it anyway. Thanks.

@5.7SOCIETY 2 жыл бұрын

You didn’t have to cut those zip ties they pry out

@nativehawaiian2871 4 жыл бұрын

can this work for a 2020 toyota tacoma ?

@92813justin 4 жыл бұрын

native hawaiian yes, it is the same procedure.

@chimneygeorge 2 жыл бұрын

Might want to put a moving blanket down to protect the paint and chrome from getting all scratched up from sliding around on your bed and tailgate. Can this grille housing be purchased aftermarket?