How To Remove Gauge Cluster & LED UPGRADE Ford Bronco OBS F150 F250 F350
Рет қаралды 24,176
Күн бұрынA detailed Video on how to remove and replace your Ford Bronco, OBS Ford F150 F250 F350 Gauges instrumentation cluster. Including an LED upgrade. These trucks are 26 plus years old and need preventative maintenance and upgrades to remain safe to drive. We do NOT recommend swapping the bottom six warning lights with LED’s. Issues with resistance have been documented. Below you will find links to reference videos as well as the tools we used to make this video. #bronco #ford #ledbulb
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Reference Video Links:
------
 How To Remove Dash Bezel / Cluster Bezel | Ford Bronco OBS F150 F250 F350
• How To Remove Dash Bez...
How To Fix Your Sloppy Shifter Arm | Ford Bronco and F-Series Trucks - Daily Driven Broncos EP 6 • Ford Vehicles How To F...
Links To Purchase LED Bulbs and Equipment
------
Camera I Use: GoPro HERO9 Black - Waterproof Action Camera with Front LCD and Touch Rear Screens, 5K Ultra HD Video, 20MP Photos, 1080p Live Streaming, Webcam, Stabilization
amzn.to/3DN0f9r
**********************
Gauge, HVAC, Courtesy - T10 921 194 168 912 LED Bulbs White 12-Pack, Super Bright 12 Volt LED
auxito.com/collections/194-le...
**********************
Milwaukee 2853-20 M18 FUEL 1/4" Hex impact Driver (Bare Tool)
amzn.to/2Zh0ZVc
**********************
New Milwaukee 2352-20 M18 3 Led Design Stick Work Light Pivots Cordless Sale
amzn.to/3nM1L5X
Follow along on:
/ broncosandparts
@broncos.and.parts.garage on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and OBS Ford Truck Parts
***DISCLAIMER***
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
FTC Disclaimer
---------
This video was not sponsored. All items were purchased with my own money unless otherwise stated and opinions are my own. If I do receive products for free, I will always disclose it, and always give my honest opinion.
This description contains affiliate links which means if you click on one of the qualified product links, I’ll receive a small commission if you decide to make a purchase. This does NOT cost you anything extra and if you don’t want to use the links you can always search Google and purchase the product separately, no worries.
Thanks !
@BroncosandPartsGarage 4 ай бұрын
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status) I take Venmo, PayPal, Zelle, Cashapp or mail me a check. Email me at n2kpi@yahoo.com for more instructions. Please remember to include your full name, EMAIL and mailing adddess.
@lifeofRyleeG Жыл бұрын
"watch me struggle to get the plugs out" hats off to you friend!
@BroncosandPartsGarage Жыл бұрын
Thanks for watching
@ericthered976 2 жыл бұрын
Well thanks for giving me another project I didn't know I needed to do! Great vid as always.
@BroncosandPartsGarage 2 жыл бұрын
We’ve all got a long weekend. Get to it
@ghilliettv 2 жыл бұрын
Cannot stop watching these videos!
@BroncosandPartsGarage 2 жыл бұрын
Thanks for the compliment
@themetalmaiden7462 8 ай бұрын
Another awesome video. I ordered the same bulbs and they arrived today. I also ordered the led headlight bulbs from the same company so I should wind up with better lighting all the way around.
@BroncosandPartsGarage 8 ай бұрын
Thanks! It’s a great upgrade
@James-pc3ww 2 жыл бұрын
Another great video, really appreciate you going through all the steps
@BroncosandPartsGarage 2 жыл бұрын
Thank you. All in the details!!
@botoepfer8588 Жыл бұрын
chris, I watch your videos to the end ! thank you keep up the great work !
@BroncosandPartsGarage Жыл бұрын
Thank you. Hope they help.
@kevinlemus7254 2 жыл бұрын
Awesome video, thanks for the secondary cluster examples!
@BroncosandPartsGarage 2 жыл бұрын
Thanks
@elkoholic6397 2 жыл бұрын
Thanks for the video. Great job showing how to get this done.
@BroncosandPartsGarage 2 жыл бұрын
Thanks. It’s a great upgrade
@MrSnooter26 5 ай бұрын
Thank you! This is super helpful in tackling my own projects with my '96
@BroncosandPartsGarage 5 ай бұрын
Glad it helped!
@zh9119 11 ай бұрын
Excellent instructional video. You guys are the best!
@BroncosandPartsGarage 11 ай бұрын
Wow, thanks!
@ballz6211 Жыл бұрын
I’m on my way to have my psom fixed but now I’m gonna upgrade my lights. Thank you
@BroncosandPartsGarage Жыл бұрын
Great upgrade
@xbigxfluffyx5923 2 жыл бұрын
Great video! Will be doing this and replacing the shift indicator.
@BroncosandPartsGarage 2 жыл бұрын
Glad it helped
@Staylor19751 Жыл бұрын
As always, very helpful video!
@BroncosandPartsGarage Жыл бұрын
Glad it was helpful!
@themetalmaiden7462 7 ай бұрын
Just completed this upgrade yesterday to my new to me 96 F350. This video was a huge help in getting that task accomplished. I did the ac control panel as well.
@BroncosandPartsGarage 7 ай бұрын
That’s great. It’s a great upgrade
@itsabigchungus 5 ай бұрын
How did you do the AC control panel?
@themetalmaiden7462 5 ай бұрын
This channel has a video on removing the AC control panel to fix broken mounts, I had watched that video also. There's 3 bulbs in the back of that panel. The led bulbs make a nice difference.
@clarkm778833 2 жыл бұрын
Thanks, this video is exactly what I needed
@BroncosandPartsGarage 2 жыл бұрын
Enjoy
@bh906 2 жыл бұрын
another fantastic detailed video
@BroncosandPartsGarage 2 жыл бұрын
Thank you.
@botoepfer546 Жыл бұрын
great video, and I watch them to the end !
@BroncosandPartsGarage Жыл бұрын
Thank you. Hope it helps
@jasontorres3780 2 жыл бұрын
thansk for the video man, super helpful!!
@BroncosandPartsGarage 2 жыл бұрын
Thank you
@danboren3169 Жыл бұрын
First time viewer, thanks so much bro, much appreciated
@BroncosandPartsGarage Жыл бұрын
No problem 👍
@Mike-jb5mv 2 жыл бұрын
Nice video. Thank you. Happy Thanksgiving
@BroncosandPartsGarage 2 жыл бұрын
Right back at you!!!
@MrADD-mi1cw 2 жыл бұрын
Just opened utube and found something to try out on my Bronco hehe great video
@BroncosandPartsGarage 2 жыл бұрын
Lots to do !!!
@donchapman1853 Жыл бұрын
The best iv seen thank you very much
@BroncosandPartsGarage Жыл бұрын
Thank you
@Pmcone45 2 жыл бұрын
Good video. Would be nice to see one installing an after market dash.
@BroncosandPartsGarage 2 жыл бұрын
I’m trying to get a company to sponsor a video and let me do an install
@Dutch1951x 2 жыл бұрын
Love these videos......
@BroncosandPartsGarage 2 жыл бұрын
Thanks. Trying my best
@s6d14p77 Жыл бұрын
Awesome vid
@BroncosandPartsGarage Жыл бұрын
thank you!
@edgargarz 2 ай бұрын
Thanks!
@BroncosandPartsGarage 2 ай бұрын
Thank you!!!
@Cookingwithabadaccent Жыл бұрын
Thank you
@BroncosandPartsGarage Жыл бұрын
No problem.
@veliomeagarras3573 2 жыл бұрын
very good video greetings from Veracruz Mexico
@BroncosandPartsGarage 2 жыл бұрын
Thank you !!
@flipcab1196 Жыл бұрын
Haven't actually seen anyone dim the LEDs after install need that feature working for long distance night drives
@BroncosandPartsGarage Жыл бұрын
Led bulbs do dim.
@donchapman1853 2 жыл бұрын
The best one I have seen change my blubls right side didn't light up is there a fuss I need to change thanks for the vido
@BroncosandPartsGarage 2 жыл бұрын
Just seeing this. Pull the bulb holder, rotate it 180 degrees. Make sure the little copper feet are on the circuit.
@peterhughes5762 2 жыл бұрын
Nice video! Question: did you use all the same color LED’s?
@BroncosandPartsGarage 2 жыл бұрын
Thanks. I always use white LED. I like the natural color of the gauges. You can remove the “coloring” on the gauge faces and then use other LED bulbs. These bulbs work in your hvac control until and your door courtesy lights.
@zflyz7136 8 ай бұрын
Yeah my right side is very dark. I need to do this bad
@BroncosandPartsGarage 8 ай бұрын
It’s a great, easy and inexpensive upgrade.
@1DjScarface 2 жыл бұрын
Detroit ✊️✊️
@BroncosandPartsGarage 2 жыл бұрын
Hell yeah
@007JVG 11 ай бұрын
Great job with the instructions! With the LEDs installed, are you still able to dim the dashlights? Or do they remain at constant brightness?
@BroncosandPartsGarage 11 ай бұрын
Fully dimmable
@007JVG 11 ай бұрын
@@BroncosandPartsGarage thanks for answering!
@devmarsh49 Жыл бұрын
Great video! What are the 6 lower warning lights? Have you tried them all for such noise? Thanks again!
@BroncosandPartsGarage Жыл бұрын
The 4WD, turn signal, check engine ect ect. The bulbs that do NOt Lightbupnthe actual gauges.
@jeramyboileau4967 2 жыл бұрын
Great video, have you ever tried white face Gauge Clusters?
@BroncosandPartsGarage 2 жыл бұрын
I know guys have “scraped” off the green and made them white. I like it matching my hvac controls.
@jakexsr6938 Жыл бұрын
also a good idea to leave a regular bulb in the battery light spot. i hear that its could mess with the exciter on the alternator.
@BroncosandPartsGarage Жыл бұрын
Only on 1996 models. They have that batt circuit.
@hondaxl250k0 4 ай бұрын
@@BroncosandPartsGaragewhat about 1997? I got a 97 f250hd with the power stroke.. should I leave the battery light stock?
@area.man. 6 күн бұрын
Thank you for mentioning this as I have a 1996 and would have replaced that bulb if I did not see this.
@zh9119 8 ай бұрын
I think with one package of 10 is enough, you just need to replace the ILL bulbs (5). I don't know if someone else have the same issue, I had ABS flashing after LED change. I removed the LED from ABS, installed the old bulb and stopped flashing so I removed all LED replaced except the ILL. You can use the rest (5) for the AC controls and save for spare with one box.
@BroncosandPartsGarage 8 ай бұрын
I don’t replace the bottom 6. We mention in video too.
@zh9119 8 ай бұрын
@@BroncosandPartsGarage Just replace the 5 ILL and that's all you need. You also replaced the other warning bulbs in the middle. You can use the rest (5) for the AC controls and save for spare with one box. Sorry, I'm cheap lol, adapted to Brandon's inflation lol.
@jamfork3871 6 ай бұрын
I just got a 91 Bronco, Automatic, 4wd, 302 and this video was very helpful, Half my dash lights weren't working, disassembled the dash to find the printed circuit board has a tear, i see i can order a new one but not sure how to replace? Any pointers? Thank you!
@BroncosandPartsGarage 6 ай бұрын
I sell the printed boards. Email me
@user-mm4gh5ux9m 8 ай бұрын
So my Check Engine light went out and caused me to fail smog. Can I just reach under and change it and not have to take cluster all the way out? Dont use LED for that light correct? Man love your videos.
@BroncosandPartsGarage 8 ай бұрын
Full removal. Search my videos. I made a bezel and cluster removal video. Thx
@jeffclark1080 Жыл бұрын
On the shift indicator, is there a small dial for adjusting it on the cluster? My indicator does not line up properly with my clusters positions and Im wondering if thats the fix. Thanks for the vid!
@BroncosandPartsGarage Жыл бұрын
Of that doesn’t help, on bottom of your column, near the knuckle, there are 3 gold torx bits. T30? Maybe. Tighten them all. Problem solved
@420kushmaster Жыл бұрын
👍
@BroncosandPartsGarage Жыл бұрын
Thx
@BroncosandPartsGarage 2 жыл бұрын
Don’t forget to subscribe for more content!!
@stevenshelley9345 Жыл бұрын
Wow great video where can I find that gauge cluster and led lites for my 97 Ford F-150 2wd👍
@BroncosandPartsGarage Жыл бұрын
I sell them. Email me
@bradfordivie Жыл бұрын
Have a 1990 F-150 manual drive ( floor shift ) with bad water temp gauge. My cluster has no shift markings. On ebay all clusters for my make & year have shift markings with cable. Do you think there would be an issue if replaced mine with a cluster with the shifter markers and cable? Thanks for video and tips for LED bulbs. Great job.
@BroncosandPartsGarage Жыл бұрын
No. Two 5.5mm screws and the indicator comes out. I sell the clusters for $95
@robertscrim2231 2 жыл бұрын
Like your videos! I have a question: the little cable for the gear selection indicator.. Should there be tension on the cable when disconnected? So when you pull on it, it gets pulled back? Or should it just easily move back and forth?
@BroncosandPartsGarage 2 жыл бұрын
There should be a small metal tension spring behind the actual dial. It should “spring” back when pulled.
@robertscrim2231 2 жыл бұрын
I found it. Lucky though, it was tiny. Almost got carried away until someone pointed out that it only took two screws in the bottom to get it out.
@area.man. 3 күн бұрын
I am having an issue now where my indicator is a little off and the transmission won't actually shift now but will go through the gear selections on the shift indicator. I got a small grind sound when putting the selector back into park after adjusting the dial on the selector cable.
@anthonylapapa7051 2 жыл бұрын
Can you remove the plastic cover with the hood screws to clean around the gauges? Mines pretty dusty and I don’t want to damage anything!
@BroncosandPartsGarage 2 жыл бұрын
Yes. T20 takes those screws out
@noahjordan23 2 жыл бұрын
Great video! Referring to the shift lever pin, the pin is visible in the cluster but is not accurate when shifting into gear, any clue on how to fix? 94 ford bronco xlt
@BroncosandPartsGarage 2 жыл бұрын
Two things. There are three gold torx screws at the bottom of your steering column (by the universal joint). Make sure those are TIGHT. Then you can you can check the indicator cable (it’s discussed in this video) it’s the small cable that is removed from the lower right side of the column. On it, there is a small wheel, you can spin this to adjust where the needle lines up in the cluster.
@TheRoadhammer379 Жыл бұрын
@@BroncosandPartsGarage thank you for the reply.
@rayiniguez7341 Жыл бұрын
Hello, looking to do this on my 95 F-150. I followed the link to tue light bulbs. There are so many color options. What is the specific color I need to look like your ? I saw different white options and amber colors on the website . Thanks
@BroncosandPartsGarage Жыл бұрын
White/ clear.
@bardo4321 4 ай бұрын
So I replaced all 11 bulbs, and now only the six at the bottom work (didn’t swap those out as instructed) Tried unplugging everything and back in. Could it be a bad fuse ?
@BroncosandPartsGarage 4 ай бұрын
Remove each led bulb that’s out, turn them 180 degrees and re install. Check the metal tabs on the bulbs are making proper contact. What brand bulbs?
@brian3739 2 жыл бұрын
Can I do this with my Ford F-150 1980 ? Or is it a different bulb style for that year?
@BroncosandPartsGarage 2 жыл бұрын
Dash yes. Turn/brake signals, no
@robertdrown7226 Жыл бұрын
After changing the bulbs to LED the ABS light kept flashing. After pulling the cluster out five times to clean contacts I changed the ABS back to a standard bulb and problem solved
@BroncosandPartsGarage Жыл бұрын
I’m glad you figured that out. It’s covered in the video that we don’t replace the warning light bulbs on the bottom.
@robertdrown7226 Жыл бұрын
@@BroncosandPartsGarage The ABS bulb was one of the eleven , not the bottom six. Its was the fourth one down , outside edge. right side, from the top of the cluster. Might have been a fluke on my cluster but thought you would like to know. I think your videos are great. Thanks for taking the time to make them
@williamkeim9471 10 ай бұрын
@@robertdrown7226 95 Bronco with the same issue. Been looking everywhere for an answer.
@johnmcdougald1238 Жыл бұрын
Do those LEDs Dim or are they alwasy bright? I usually turn my lights down until it's just bright enough to see the instruments. I've never liked a lot of light shining back in my face at night when I'm driving.
@BroncosandPartsGarage Жыл бұрын
They are still dimmable with your Dimmer switch
@johnmcdougald1238 Жыл бұрын
@@BroncosandPartsGarage Awesome. Thanks.
@ballz6211 Жыл бұрын
Are all the lights the same size in a Obs Ford? Climate control, stereo etc?
@BroncosandPartsGarage Жыл бұрын
yes, but don't swap the airbag bulbs. links in video description
@harleyd9857 2 жыл бұрын
Wonder Where the speedometer and tach cable attach?
@BroncosandPartsGarage 2 жыл бұрын
On the 5th Gen Broncos, there is no speedo cable. 4th Gen Broncos were the last to have a speedo cable.
@WayneKerrr 2 жыл бұрын
I’m guessing these same instructions can be followed in a Gen 3? Maybe a little different but I can’t imagine they’re THAT different
@BroncosandPartsGarage 2 жыл бұрын
Yes. Very similar. Just different bezel. Some hidden screws and You’ll need to unplug your speedometer cable from the back of your gauge cluster
@WayneKerrr 2 жыл бұрын
@@BroncosandPartsGarage awesome, thank you! I’m still a good ways away from interior work but I will be referring to so many of your videos when the time comes
@travischaney7795 2 жыл бұрын
Any issues with the LEDs after some time has passed?
@BroncosandPartsGarage 2 жыл бұрын
Mine are still working. Dimming still works. Been over a year
@richardallen1816 2 жыл бұрын
Do you put dielectric on the plugs? if not, why not...other than you may not be doing this for another 25 years, if ever.
@BroncosandPartsGarage 2 жыл бұрын
I do not. It’s a very dry area behind the dash. Dusty but dry.
@rileyward4929 Жыл бұрын
would this work on an 89 bronco?
@BroncosandPartsGarage Жыл бұрын
Yes
@sanjose13 Жыл бұрын
Do you know how to fix the temperature gauge?
@BroncosandPartsGarage Жыл бұрын
Check your actual sending unit on engine first. If it’s ok, just swap the temp guage in your cluster. We sell them
@sanjose13 Жыл бұрын
@@BroncosandPartsGarage can’t seem to find them on the website for a 95 bronco.
@Leviathan58651 2 жыл бұрын
Does the dimmer still work with the LEDs?
@BroncosandPartsGarage 2 жыл бұрын
Yes. Perfectly.
@Leviathan58651 2 жыл бұрын
@@BroncosandPartsGarage any reason why you don't do the bottom leds?
@DankoStojanovic Жыл бұрын
Why do you leave those bulbs? Why not replace all?
@BroncosandPartsGarage Жыл бұрын
They cause errors in airbag warning. So it just my practice to avoid.
@joeyb7373 2 жыл бұрын
1994 f150 where is the bulb location for high and low beam on the cluster
@BroncosandPartsGarage 2 жыл бұрын
Below the vertical plug, on tach side of cluster
@joeyb7373 2 жыл бұрын
@@BroncosandPartsGarage thank you so much
@MegaChoncy555 Жыл бұрын
Why is it that you leave regular bulbs In the lower lights?
@BroncosandPartsGarage Жыл бұрын
The turn signals are ok. But on 94+ you’ll have issues with your airbag module by switching to LED. It’s not a 100% issue, but it arises often enough to skip swapping.
@MegaChoncy555 Жыл бұрын
@BroncosandPartsGarage so pre 94 shouldn't have any issues with that? Mines a 92
@BroncosandPartsGarage Жыл бұрын
Led Bulbs For Sale amzn.to/3lw7deR
@nunabiz 4 ай бұрын
You don't need to take all that apart to change the dash lights. You don't even have to take it out
@BroncosandPartsGarage 4 ай бұрын
Are you serious? lol. Read the title of the video 😂😂😂😂👍🏻👍🏻👍🏻
@nunabiz 4 ай бұрын
@@BroncosandPartsGarage yeah I got it bro! But you don't need to remove the gage cluster to change out the lights! You don't have to disconnect the shifter! So if all your doing is upgrading or replacing cluster lights he just made it more difficult and longer. There's already videos on KZfaq that shows you how.
@nunabiz 4 ай бұрын
@@BroncosandPartsGarage and frankly after doing this job I would rather leave the cluster in and take the lens off for access. The gauges themselves are easier to remove then disconnecting the plugs from the back of the cluster. They are harder to get apart and therefore more chances of breaking the plug.
@BroncosandPartsGarage 4 ай бұрын
Thank you for watching mine.
@BroncosandPartsGarage 4 ай бұрын
Take the lens off? lol. You obviously have not swapped bulbs. You can do it your way?!? Or the proper way. Thank you for watching and helping my algorithm.
@mjpatton84 2 жыл бұрын
Why don't you put LEDs for the idiot lights?
@BroncosandPartsGarage 2 жыл бұрын
The resistance is different. The bulbs won’t work properly and you’ll get an odd alarm sound for your airbag light.
@mjpatton84 2 жыл бұрын
@@BroncosandPartsGarage wow. Learn something new everyday
@dball87 2 жыл бұрын
@@BroncosandPartsGarage do you know if it’s just the airbag and abs, or is it all of them? Do you have a link I could read more?y research is coming up dry. Thanks!
@fredm2786 2 жыл бұрын
I Chris im looking for some in interior parts for my 96 bronco , do you have a email or whats the best way to reach you. Thank you and i love your videos
@BroncosandPartsGarage 2 жыл бұрын
Email is in the video description. Just load, click on title and it will appear. Thanks
@monciparedes 2 жыл бұрын
Just when I think my list of stuff I want/need to do is complete, I stumble across videos like this and my list gets longer. 🥲👌🏼
@BroncosandPartsGarage 2 жыл бұрын
You can do it!
Broncos and Parts Garage
Рет қаралды 28 М.
Broncos and Parts Garage
Рет қаралды 25 М.
Broncos and Parts Garage
Рет қаралды 45 М.
Minute Masters
Рет қаралды 30 М.
Broncos and Parts Garage
Рет қаралды 106 М.
Broncos and Parts Garage
Рет қаралды 30 М.
The Fix
Рет қаралды 114 М.
jamoloniy
Рет қаралды 1,1 МЛН
Мотор и Колёса - питбайки, квадро, эндуро
Рет қаралды 521 М.