How to Remove: Headlight, Side Panels and Glovebox/Frunk on a Can-am Ryker

No video

How to Remove: Headlight, Side Panels and Glovebox/Frunk on a Can-am Ryker

Рет қаралды 8,555

Күн бұрын

How to Remove: headlights, side panels and glovebox/frunk on a Can-am Ryker
Check out my website: www.RykerRydes.com
for Can-Am Ryker parts and accessories!
#CanAmRyker #CanAm #Ryker #RykerRydes

Пікірлер: 49

@marcimartinez247 2 ай бұрын

Thank you so much for this video!! I was attempting to swap.out my OEM headlights for LED by just going through the back and was so frustrated! I've learned so much from watching your channel!!

@RykerRydes 2 ай бұрын

You are so very welcome! 🤗

@rykerparkingonly7441 2 жыл бұрын

You always make things so easy for your followers. What originally might have been to intimidating, you now make simple. Well done.

@RykerRydes 2 жыл бұрын

Thanks John!!!

@heatheronwheels 2 жыл бұрын

The other half and I installed my lights without removing the whole housing. It was a nightmare. He installed his this way and it was a world of difference! Thanks for sharing this.

@RykerRydes 2 жыл бұрын

Awww thanks Heather!!! ❤️❤️❤️

@larryselman1794 Жыл бұрын

Can not find your video for removing gas stains ! Thanks for all your help👍👍👍👍

@RykerRydes Жыл бұрын

Sorry for late response!! What is the Best Way to Remove Gas / Petrol Stains (on a Can Am Ryker)? kzfaq.info/get/bejne/o9aclbSWvLHdZX0.html

@johnd9031 2 жыл бұрын

Good review, good analytical skills. I like the way you divided the project into five small steps.

@RykerRydes 2 жыл бұрын

I appreciate that!!

@GrumpySpyder-Ryder 2 жыл бұрын

I change out the headlights on both Rykers the hard way. Right side was the worst. I can see it would have been easier to remove the housing. Thanks again the the great videos.

@RykerRydes 2 жыл бұрын

Yup, 💯 easier. I miss you. We need a good chat soon!

@wendy8739 2 жыл бұрын

👍🏻. This looked a whole lot easier than when you did it previously.

@RykerRydes 2 жыл бұрын

💯 easier!! I like to learn from my experiences and then share them. Thanks for your continued support!! ❤️

@coreywiley7196 Жыл бұрын

Just followed your instructions, thank you so much for the video. Much easier to follow than the Slingmod instructions, they need to request use of your video. Again, thank you. Also, I used a T-30 and it fit perfectly? Probably the assembler used a different torx? Thanks Beth, and Tina (videographer).

@RykerRydes Жыл бұрын

You're so welcome! I really appreciate your kind words!!!

@frozgt77 2 жыл бұрын

Yet another great tutorial video. I’m learning so much from your videos. You rock 🤙🏻. Thanks!!

@RykerRydes 2 жыл бұрын

Awwww thank you so much. I appreciate you watching! Ps sorry for my delayed response, I am still on my bike trip.

@FanouSL 2 жыл бұрын

Thank you!

@tpv59 Жыл бұрын

THANK YOU. APPRECIATED Very much.

@RykerRydes Жыл бұрын

My absolute pleasure Terry. Thanks for watching!!

@badeleon07 2 жыл бұрын

Beth, my frunk cover has a bunch of scratches. I tried googleing how to remove just the cover and only saw your video. My question is, can you just remove the frunk cover. I saw at cheapcycle that I can order just the cover. Thank you in advance for answering my question.

@RykerRydes 2 жыл бұрын

Yes! There are 2 small screws that hold the frunk lid in place. Then it should just pop off. If you run into trouble PM on FB and I can walk you through it.

@badeleon07 2 жыл бұрын

@@RykerRydes You're the best!! I mean that. I only think of your channel when I have Ryker questions. You're awesome!!!!

@kenniitran 2 жыл бұрын

Thank you for a nice vid tut.

@RykerRydes 2 жыл бұрын

Thanks Kenny!!! 😉

@sharonpinkosh9204 Жыл бұрын

Hey Beth, I just purchased a '22 Ryker 600 ACE and installed the SlingMods reverse jockey shifter, which required removing the lower left side panel. Shifter went on great, but now I can't get the panel back on. Any tips/tricks would be so appreciated. Am getting zero help from the dealership.

@RykerRydes Жыл бұрын

Hi Sharon. I am so sorry for the late reply. Were you able to get the panel back on?

@michaelgregory7704 2 жыл бұрын

G'day Beth, greetings from down-under and kudos for the content you continue to supply - it's always informative. Regarding the Ryker "push-pins" do you happen to know the specifications for these and are all the push-pins on a Ryker the same size??

@RykerRydes 2 жыл бұрын

All the pushpins on the Ryker are the exact same size. Here is a link for you: www.slingmods.com/replacement-push-pins Thanks so much for watching!

@servantsoldier5207 2 жыл бұрын

Beth of all the parts & accessories; why haven’t can am or you considered adding hazard flashing lights? As a retired fl law officer I’m thinking about traffic safety and tons of traveling motorists. I’m curious why can am haven’t added these much needed lights to their US Rykers even in ‘22. Even you haven’t added it to your Ryker

@RykerRydes 2 жыл бұрын

You are 💯 correct. It should Be on the Ryker. Honestly, this may sound silly, but the one time I need hazard lights, I just put it in reverse. Boom, flashing lights. Not a perfect solution, but it works.

@servantsoldier5207 2 жыл бұрын

@@RykerRydes Use of hazard flashers: just verifying soooo when I take the trike out of park, while in reverse, the flashers illuminates and the trike will not move backward unless I throttle correct?

@fredscott413 2 жыл бұрын

Hi there just wanted to say hi,fred.

@RykerRydes 2 жыл бұрын

Hi Fred!!! How are you my friend??

@bullsback23 Жыл бұрын

What are you do with the plastic washer that was on the original headlight do you leave that off and just use the black one that comes with that headlight?

@RykerRydes Жыл бұрын

You use the new one that comes on the new light.

@bullsback23 Жыл бұрын

@Ryker Rydes thank you very much for your response it was definitely helpful. My next question is my Ryker is pretty new I almost hit 300 miles but I was told once I hit 200 miles I should get an oil change but when I called the dealer he's talking about its going to cost me a little over $400 is that true? For checking all the bearings and make sure everything is running correctly?

@RykerRydes Жыл бұрын

@@bullsback23 you should be able to bring your Ryker to the dealership for a free walk-through after 200 miles to make sure everything is intact. That is common place to do after you buy a new Ryker. As far as the oil change is concerned, there are two schools of thought. One is after the break in, which is usually 500 miles or some believe you can wait 6000 miles for the first oil change. I think I did mine after 4000 miles. I will give you the link so you can follow my steps to do the oil change and it’s not that hard, it’ll save you a bunch of money. How and When to Change Your Can Am Ryker's Oil (6 easy steps) kzfaq.info/get/bejne/mLWXacmj0Z-8g6c.html

@bullsback23 Жыл бұрын

@@RykerRydes thank you so very much

@bullsback23 Жыл бұрын

@@RykerRydes I wanted to try to do my first oil change myself but I didn't have the necessary equipment. I've seen videos and as expected most people doing oil change have everything they need but they don't really go through what you should purchase to continuously do your own oil change besides the filter and oil

@creshaishmael4638 Ай бұрын

Where can I find the led light?

@RykerRydes Ай бұрын

Which red light?

@creshaishmael4638 Ай бұрын

@@RykerRydes the headlights the white one? I was to switch to the LED lights

@salimfaysal6651 2 жыл бұрын

👍

@johnd9031 2 жыл бұрын

First again.😄

@RykerRydes 2 жыл бұрын

You’re the best John!!

@johnphillips8088 2 жыл бұрын

Just want to add: a CAUTION, it’s so easy to break the plastic on the CanAm panels! Be VERY CAREFUL , if you are not sure as to how a panel removes. Go to you-tube, and do full research on how to remove a given panel. These things are made really CHEAP, I’m certainly sorry to say this cause I own one. Also when you break one of these tabs, good luck finding any type of glue that will bond to this type of plastic. And who wants to buy a new panel just because you broke one of the fasting tabs.😡

@RykerRydes 2 жыл бұрын

I am so sorry to hear that.