HOW TO REMOVE OR REPLACE CYLINDER HEAD GASKET ON HYUNDAI ELANTRA 1.8 2.0 NU

Рет қаралды 130,092

Күн бұрын

HOW TO REMOVE OR REPLACE CYLINDER HEAD GASKET ON HYUNDAI ELANTRA 1.8 2.0 NU
► Head Gasket: amzn.to/2ynGftE
► Head Bolts: amzn.to/2pFdepm
In this video, we will demonstrate how to remove or replace cylinder head on Hyundai Elantra or Hyundai i30 or Tucson with 1.8 2.0 NU engine. We demonstrated how to remove the cylinder head on a 2013 Hyundai Elantra GLS. Some models and years might differ. More Hyundai Elantra Repair Videos: goo.gl/6HZZwS
This video might be helpful on 1.8 and 2.0 NU Engine:
2010 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2011 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2012 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2013 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2014 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2015 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2016 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2017 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2018 Hyundai Elantra i30 Tucson how to replace remove cylinder head
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 99

@AutoRepairGuys 5 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@damionhordge1478 5 жыл бұрын

Need help changing my cylinders 1@2

@Jason-zz3cn 5 ай бұрын

Rrryyy TY y😅m444m4r4r⁵😢😢5k7😢444😢⁴😢⁴😢😂 Þ as

@martwells786 5 жыл бұрын

Best video I've ever watched... thank you!.. if I win the lottery or something I'll remember this

@peterbaloyi8107 7 ай бұрын

These videos are very much helpful. Am almost complete with putting my engine together

@christopher-michaelcopolil4062 9 ай бұрын

Thank you so much, you’re saving me 8k.

@alanchiu1285 3 жыл бұрын

U have very detail information than others. U are elantra expert.

@dalefancher 2 жыл бұрын

You guys are awesome. Thank you for sharing your talents.

@remfernandez5310 3 жыл бұрын

Love your videos done in details. I have a question with hyundai i10 on how to retime the timing chain when slip. Thanks

@spenceryazzie765 5 ай бұрын

One thing they don't talk about is once the timing cover is off the engine must be supported through the rest of the process unless you keep a jack stand under the car when you take breaks(timing cover has the engine mount attached to it). My subaru forester had a engine bracket underneath so no need for support.

@miralmas 5 жыл бұрын

Great video I have Hyundai Tucson 2.0L petrol and the coolant coming out from back is it because of head gasket and I need all the torque specs for cylinder bolts and side timing chain cover bolts and for valve cover bolts and the engine bolts I want to change head gasket.

@mallorygutierrez9243 7 ай бұрын

Excellent video ! As i watch, but wait there's more disassembly 😅😅😅

@mustafapixel1749 2 жыл бұрын

عمل نظيف و لطيف شكرا 🌹

@1234567891633 5 жыл бұрын

keep up the good work thank you so much for the effort

@andrewbryant9214 3 жыл бұрын

Subbed. I’d really like to have seen y’all replace the valves

@mmm4638 2 жыл бұрын

thats ONLY job of a machine shop.

@seandknutson 6 ай бұрын

Great video! Lots of helpful details. I'd like to know more about disconnecting the exhaust. Do you have any tips for how to do that if those bolts are rusty and won't break loose?

@eddiesheeran5791 4 ай бұрын

Great video! Thank you!

@mcroadracer1 2 жыл бұрын

Another excellent video

@louiecarlos7331 Ай бұрын

Great video!

@jairovarela6172 2 жыл бұрын

Real good explination tanks

@Warex06 2 жыл бұрын

Thanks for the video

@familiadinizemwashingtondc3072 5 ай бұрын

Thanks for the video, teacher

@danysperez-carrillo6630 3 жыл бұрын

Good video mate’ cheers

@hussainkassim9781 2 жыл бұрын

Why you removed the oil pan? Can I hold engine if I put a lift jack on transmission side??

@darkfox9999 5 жыл бұрын

Good job

@bryanmarquette2703 11 ай бұрын

I am replacing the head gasket on a 2013 Hyundai Elantra Limited, and some how a dowel pin came out possibly somewhere on the head, or camshaft carrier, but I didn’t see where it came from. This is driving me crazy!! Can you possibly help with location of dowel pins, it is larger diameter than the two that the head gasket fits over.

@Matth-mg7yr 2 жыл бұрын

What did you use to clean inside the block? Those pistons are very clean! Also, where are the areas you need to lay beads of silicone on (besides the corners you lifted up)

@mohitolewis9713 9 ай бұрын

Thanks For sharing

@JuanSanchez-ik7wx 7 ай бұрын

Wouldnt it be a good idea to have the top rebuilt while it was disassembled?

@justinfox1169 2 жыл бұрын

Do you have the part number for the head bolts? My 2016 - bolts are all the same size and have washers, but the ones that came are different sizes and only 4 have the washers.

@frankosauto Жыл бұрын

Exactly how do you manipulate that front cover to remove it? My car is a 2018 kia forte 2.0 the exact same engine. I even removed the coolant hose to allow the engine to raise just a little more but the cover still wont clear the crankshaft!

@michealheath1460 2 жыл бұрын

I have a 2012 Hyundai elantra limited i took it to the shop and they told me there is metal shavings in the oil and there is low compression in the cylinders they told me i need a new motor but i would like a second opinion the car turns over but wont start i replaced the spark plugs and ignition coils so far any ideas

@daginaldwheeler482 3 жыл бұрын

Are the head bolts torquing with aluminum block threads

@eugeniadavis2470 3 жыл бұрын

I see why they charge a lot of money to fix a head gasket.. Alot of work

@rr6542 2 ай бұрын

hello I have a question about about my 2010 Hyundai elantra I have hard time putting gas in and then I have a hard time getting it to startup I replace. the purge valve and still having problems with it need some help

@MrThommoht 2 ай бұрын

How do you remove the AC vent on the passenger side of the 2014 Hyundai Elantra. Mine seems to be blocked. Thanks

@johndoyle6235 2 жыл бұрын

I'm about to do my first engine rebuild on a 2014 Hyundai accent is there anyway you can send me the videos you have on dismantling and reassembly plz

@thebokchoys6284 5 жыл бұрын

Can anybody help me I have a 2008 Mazda CX nine I need to know where is the engine Coolant sensor located at

@JuanSanchez-ik7wx 7 ай бұрын

why did you remove the oil pan? Why did your remove the crank pulley? How did you get the exhaust separated?

@spenceryazzie765 5 ай бұрын

Oil pan is connected to timing belt cover by 2 oil pan screws

@spenceryazzie765 5 ай бұрын

Back exhausted is held on by 4 screws. 2 on exhaust pipe, which is easiest to due from the top(not really easy), and 2 mounting it to the back of the engine

@mr.buttermlg2457 9 ай бұрын

Is guide good for a veloster turbo 1.6 gdi engine.

@hugoalexisvillamayor 7 ай бұрын

Please take off your beauty watch😂😂. Nice video 🎉

@joellefrancis960 2 жыл бұрын

Hello i have a Hyundai elantra 2012 it hesitates only when trying to accelerate not on steady gaz or cruise problem is no engine light trying to figure out the problem

@Schlumpfblau 2 ай бұрын

Why remove the oil pan and camshafts? Are the cylinder head bolts under the camshaft?

@ivanrodriguez5130 4 жыл бұрын

Why do you have two air intake filters?

@garfieldwatson3626 2 жыл бұрын

Is it safe to double Head gasket or use a thicker one if you only change piston and rings

@Warex06 2 жыл бұрын

You don’t ever want to stack 2 head gaskets, even if you had your cylinder head resurfaced/shaved.

@rogeralaniz5116 Жыл бұрын

How do you relearn the throttle on a 2013 elantra 1.8 L? This car is idling to low.

@fbaldus 3 жыл бұрын

One question? Did this gasket just fail? I have a 2014 elantra that's burning coolant and everything is ok (fans, thermostat etc) I. I removed the head and I can't even see where the it failed. I just wanted to know if it's common for this gaskets to fail. Car has 106k miles

@jaybarrera1834 3 жыл бұрын

most likely it failed due to deteriorating

@AlienBros 5 жыл бұрын

I have a question for you guys. My mechanic found 13 decent sized metal fragments in the oil pan of my 2009 infiniti g37x. He has no idea what is causing it and the check engine and master warning light is on and we can't figure out what is causing it. I have pictures of the fragment if there is a way to send it to you guys I will do that. He found this when he went in to replace the galley gasket and found both gaskets and the timing completely in tact. The shifter is also locking up too and having a hard time changing gears unless you push up on it (it is an automatic). I do not want to give up on this car and I am already out $1000 for the labor on the gasket that wasn't even blown. The VVTC solenoid was also replaced for $700. This car is bleeding me money but I love it and don't want to get rid of it. It also keeps going into limp mode and when he cleared the codes the car ran perfectly with all the power available but it would quickly go right back into limp mode and the light comes right back on. I don't want to have to take it to Nissan but it is looking like I may have to. Do you guys have any idea what could be causing this? I really need help. Thanks.

@big_mac6037 3 жыл бұрын

I know exactly what it is it’s the oil galleys Notorious on those engines

@JuanSanchez-ik7wx 7 ай бұрын

heat on the hose will make the removal easy

@lintchit9960 4 жыл бұрын

Do I really have to take out all the parts from the bottom of the engine or can I just take out the parts from top of the engine until I can reach the headgasket?

@hallaluya6389 3 жыл бұрын

Something i really need to know as well

@austinhutson720 2 жыл бұрын

Same

@graymurillo5336 Жыл бұрын

You need to remove the oil pan, because it’s bolted to the timing cover on the side. If you forget it and break the timing cover it’s gonna cost you a lot more than you think.

@evangelosmindis739 Жыл бұрын

You didn't replace the cylinder head screws, did you? To the best of my (somewhat limited) knowledge, they are not reusable, they should be replaced.

@muhammadgill9157 2 жыл бұрын

What is the name of the piece he removed at 40:56??? I tried to create a new thread in it with helicoil and the manual drill bit broke off inside of the hole. I can’t remove it so I’ll have to replace the part.

@mouzzy77 2 жыл бұрын

upper camshaft carrier on cylinder head

@joshuasmith2814 3 жыл бұрын

This is great video... and now I definitely don't want to do it.

@dannymaldonado7438 4 жыл бұрын

Excellent videos

@robertsmith3774 3 жыл бұрын

Can you show us how you checked the head for warpage, before you reinstalled the head?

@mmm4638 2 жыл бұрын

it has to be shining clean no blue green purple marks of burnts, and ofcurse with finger you shouldn't feel any scratches. regardless, head always should go to machine shop for inspection otherwise its a risk no mechanic wants to take

@YemaninetTekorkuari 4 жыл бұрын

Could you show us how REPLACE CYLINDER HEAD GASKET ON HYUNDAI Hi Grand Starex?

@mustafapixel1749 2 жыл бұрын

ب التوفيق للجميع

@kootahmed5224 26 күн бұрын

❤❤❤❤❤❤

@nizamsulaman2996 2 жыл бұрын

Hi , is this procedure for Hyundai engine code G4FC

@kootahmed5224 26 күн бұрын

❤❤❤❤❤❤❤

@jshall1000 4 ай бұрын

At 1320 after the air filter is that a turbo I couldn't catch what u said

@mustafapixel1749 2 жыл бұрын

احسنت بارك الله بيك

@nathanalexander8756 2 жыл бұрын

Is this the same engine in a Kia cerato

@antonioas709 Жыл бұрын

What about changing a head gasket on a hyundai azera

@miralmas 5 жыл бұрын

And it is 2017 Hyundai Tucson 2.0L Petrol

@jerrysherwood2886 Жыл бұрын

How about a how to Ls or 2jz swap an Elantra?

@Gagandeepsingh-tk3er 3 ай бұрын

U didn’t showed the exaust connection, I’m stuck there

@genehauser9217 26 күн бұрын

A job best left to the professionals. Now I know why it’s going to cost me 4K dollars

@hussainkassim9781 2 жыл бұрын

When I pulled out the cylinder head. 2 small parts fell off. It looks like a socket without any threads. Where does it go. It looks like it was just sitting in a hole and fell off. Help please

@MenofValueSpeaks 2 жыл бұрын

Did you figure this out? It sounds like the dowel pin fell out. They are used the align the head so it can stay in place and not slide around on the gasket before torturing it down. Go to 47:30 , from the very top left of the engine block mating surface, you see a small bolt hole, a water jacket hole and right to the right of that hole is a metal cylinder sticking out of the head. That is a dowel pin. It fits in that hole and holds the head on that peg.

@ariebesserman3746 4 жыл бұрын

Why do I need to remove the oil bucket at the bottom at all ? Why do I need to support the engine from the bottom when I only remove the top of the motor?

@realvw 4 жыл бұрын

Don’t need to take oil pan off. You need to support engine so you can remove the motor mount. The motor mount is in the way.

@JoseSantana-pq3uc 2 жыл бұрын

smart man nobarika

@acrocheezefpv 11 ай бұрын

ngl, i was feeling like i was able to do this myself an save money, but when it came to the head bolts being torqued 90⁰, i feel like just paying apprx 3k to have someone do it for me lol idk, i may take a shot. itll b my first time doing real heavy labor on my car 😅

@yasminesli3997 3 жыл бұрын

Almost brand new engine why to change head gasket ???

@graymurillo5336 Жыл бұрын

Demonstration purposes.

@martwells786 5 жыл бұрын

How to do the timing?

@jaydizzledyal1992 4 жыл бұрын

What do u need to know about the timming

@mannypogi1960 3 жыл бұрын

Why he cant removed his wrist watch?

@STiHigh1 2 жыл бұрын

I thought the same thing. Unprofessional imo. I found it a distraction while viewing what is otherwise a good instructional video. Surely that large, floppy watch must get in the way when fiddling around in cramped situations...plus it can't be doing the watch dial/crystal any favours. :)