In this video, find out the best and easiest way to remove and replace the five star base on your office chair.
Пікірлер: 130
@doggiesarus2 жыл бұрын
Thanks for making this video. After buying the chair parts, getting the cylinder from the base is the hardest part. Also, I soaked it with WD-40 for a few hours which really helped. I fixed my office chair in less than 10 minutes. No helper, just the old wooden stump outside, and a rubber mallet.
@SabrinaB4123 жыл бұрын
Finally! Someone who understands that I wanted to remove the base from the cylinder. Worked fast and was rather easy!
@RightAngleProducts3 жыл бұрын
I'm glad you found it helpful!
@90sanimemusiclyrics732 жыл бұрын
Yup. People always talk about the cylinder
@joshuachapman78183 жыл бұрын
That's what I needed to see!!! I wasn't using my leverage correctly and I was hammering the legs instead of the center cylinder! Thank you
@RightAngleProducts3 жыл бұрын
You're welcome! - CK
@jameshetfield29662 жыл бұрын
Thank you for sharing, the clylinder on my chair initially seemed to be badly stuck into the base, and I recalled using ball bearing exactractor from the old days for such situations, but luckly i saw this video, it was not as badly stuck as I thought and was able to hammer it out with rubber.
@raymondmasters1 Жыл бұрын
This is a video that there should never be a need for in a perfect world BUT I could not for the life of me figure out how to get it apart. Thank you 1000 times for this awesome video that saved my day!
@anthonyhogan5112 жыл бұрын
I had a fair idea this was the way to go about it, but actually seeing it confirmed is always nice. Thanks for an informative video that got right to the point! :)
@warranmouton65758 ай бұрын
Took my ENTIRE chair apart before finding this video. Could have saved so much time lol. This was extremely helpful, thanks.
@nicolaebreaban81542 жыл бұрын
God bless you good sir. You just saved my back a lot of aches and pains.
@vantoanto2 жыл бұрын
Perfect video! Exactly what the title says. It took me 3 mins to change the base of my chair as well! Thank you so much. :)
@RightAngleProducts2 жыл бұрын
Glad it helped
@markprocter6782 Жыл бұрын
Thanks for that. The central pillar on mine is nearly touching the floor dragging the carpet around. I didn't know it's a push fit, I couldn't tell from looking. I can remove it and put something in to raise it a bit now.
@bungeycord5971 Жыл бұрын
This worked great, did it by myself. Thanks
@sanghpriyag2 жыл бұрын
Thanks. It's exactly what I was looking for 🙂👍🏼
@ThisIsJeer Жыл бұрын
Thank you very much for making this video. This is very helpful
@arafat88ryu2 жыл бұрын
I never thought this kind of video existed (well, until my own chair was broken). I found out if can separate the seat from the leg structures, you can hammer away the cylinder by placing the 5-star base on your thighs. And if you don't have a mullet, place a piece of wood or old form 3 (9th grade in the US) math textbook on the cylinder and hammer away.
@jameshetfield29662 жыл бұрын
There is even several videos on how to change / clean the 5 start wheels!
@blindtreeman8052 Жыл бұрын
been whacking on mine that exact way for about half an hour and it just wont budge
@BrassLock Жыл бұрын
@@blindtreeman8052 Me too! It's exasperating!
@Joshua-sh4mb Жыл бұрын
Thanks for the video, didn't have a mallet or a friend to help so made do with the end of a rubber weight and put the chair on its side but it worked.
@darkservers10542 жыл бұрын
Thanks dude! Very helpful.
@WillTheLionКүн бұрын
Your video helped me so much! Thanks!
@roger_001 Жыл бұрын
Just what i was looking for! Thanks a lot!!
@RightAngleProducts Жыл бұрын
You are welcome!
@ricardorivera55562 жыл бұрын
Excellent, Thanks!!!
@francis75513 жыл бұрын
Thank you so much. 🙏🙏 It was really helpful while removing the cylinder. 👍👍
@RightAngleProducts3 жыл бұрын
Glad it helped
@francis75513 жыл бұрын
@@RightAngleProducts of course dear Sir ❤🙏
@joshuacharlesdaweactor4300 Жыл бұрын
Do you have a video for office chairs that are stuck in recline? I’m using the correct lever but it won’t release??
@maxmumbai12342 жыл бұрын
Thank you, this was helpful. Are all bases of standard size or can there be different base sizes?
@RightAngleProducts2 жыл бұрын
Chair bases can be different diameters and different heights. When replacing one for another, make sure to get one similar to what you're already using. However, the ring size where gas cylinder is installed it typically the same standard size. - CK
@natthnatths Жыл бұрын
Thank you so much! Now we can change IKEA chair base.
@nogoodkeister9251 Жыл бұрын
This worked. Thanks.
@GabrielDoesAThing11 ай бұрын
I found a slightly different method to remove base that doesn't require a partner, I set the chair on its side so that I could push it with my legs as I hammer the cylinder, also I put a piece of cloth on the cylinder to protect from sparks / metal chips
@BenjaminBanger Жыл бұрын
Thank you so much it Worked!
@steveharper8793 жыл бұрын
thank you. I may need to do this very soon.
@RightAngleProducts3 жыл бұрын
You're welcome!
@nobody2003s2 жыл бұрын
Thank you!
@TheRazvancristian3 жыл бұрын
How i find exactly size piston for my chair?
@mystic4l2 жыл бұрын
Tysm!!
@PatronSaintOfPigeons3 жыл бұрын
For anyone who has issues where you CANNOT remove this part as I did, if you have a replacement base and lower part of the cylinder: Remove the tab and the washer from the bottom Let the base of the cylinder slide off Take your new parts(I gutted mine from an old sturdier chair, remembering that you need the star shape AND the lower part of the cylinder removed) (Also be careful, there are parts you don't want to lose inside and they may fall out) Put the base onto the desired chair, placing the washers back in their respective places, then sliding the tab back over. Upright your chair and voila, good as kind of new. I will say this isn't against this video, if he hadn't mentioned the base would slide off if you remove that tab, I would have never tried, so thanks mate!
@TheDrCN3 жыл бұрын
I've replaced 4 of these cylinders in the past week, and I did exactly the same thing, taking off the tab. For replacing the cylinder, there's nothing wrong with taking the tab off the old cylinder. But the thing I've had trouble with, and what I was hoping would be covered in the video, is getting the tab back on. For some reason it just does not want to work for me. Do you happen to have any tricks for that? It doesn't actually matter for me at the moment, since we were just replacing cylinders, but it'd be nice to know in the future if I ever have to replace a base that's already in a good cylinder.
@bucciarati77662 жыл бұрын
Thank you for this 🙌🏼
@hearttreasure5891 Жыл бұрын
Thanks
@JamesACosby7 ай бұрын
@@TheDrCN Two years later but I wanted to ask because I have same question, Maybe the tab doesn't matter? I am not sure what it does except maybe if you turn the chair upside down or something? Otherwise, it doesn't support any weight.
@samersabeeh13612 жыл бұрын
I tried hard but did not have rubber hammer ! Hope you have another idea
@ARTehh2 жыл бұрын
This is great! Thanks for sharing! Have the same vid
@ecvkee2 жыл бұрын
lol.. thanks for the how to video. helped us out when we were trying to remove the stubborn base kekw
@jacobstone1833 жыл бұрын
Hey boss. The base of my chair isn't coming off, even when I do it just as you did in the video. I'm whacking it hard enough to indent and gash my mallet to no avail. What do you think?
@RightAngleProducts3 жыл бұрын
Did you try wd-40? spray some on it so it runs down around the cylinder and leave it over night.
@kennyamr5 Жыл бұрын
thank you for this. 10/10
@corona43243 жыл бұрын
That’s boss. My brother was going to throw out a very nice chair and I just brought it home to see if I could fix it. Saving me a ton of money.
@RightAngleProducts3 жыл бұрын
I'm glad you found it helpful! - CK
@sathishkumarc69357 ай бұрын
Thank You! Finally I had overcame with my worries....
@whataboutfacts2 жыл бұрын
this is great! Thanks for sharing have the kinda same vid
@holverttigo1124 Жыл бұрын
can u use any base on any chair becouse i cant find a replacement
@danalynch8889 Жыл бұрын
I got the cylinder out of the column but the column is stuck. The column is even with the chair on bottom The cylinder is bad so upgrading chair parts to 500lbs. I have used rubber mallet, small and big hammer and 3-1 oil and hammered a lot but can't get it out. Any suggestions. I thought of replacing my wood banker chair base but can't find one. So I'm trying to avoid buying new wood banker chair.
@RightAngleProducts Жыл бұрын
You can use a pipe wrench and turn it. That will break the friction but will damage the cylinder. If you are replacing it that shouldn’t be a problem.
@itzalfi Жыл бұрын
Are all chair bases interchangeable?
@Kai-fr2fd3 жыл бұрын
Hi, I have a similar-based chair. We have been using a mallet the same way you did, but the chair base wont come off, is there any way that you could help if we send you a picture somehow?
@RightAngleProducts3 жыл бұрын
If you are replacing the chair cylinder you can use a pipe wrench but it will damage the black tube. if you can wrap it with rubber or leather from a belt on the bottom of the cylinder then use the pipe wrench you shouldn't scratch the tube, have someone help hold the chair base while turning the cylinder.
@SabrinaB4123 жыл бұрын
You've gotta hit it hard and it's got to be held in the air over something to catch the chair so you don't drop it on your feet. I used a hammer sideways because I didn't have a mallet.
@SabrinaB4123 жыл бұрын
Try spraying WD-40 around the plastic and the cylinder, it may loosen it.
@ozoboy146 ай бұрын
just wanted to double check how to attach the base to the cylinder, heres a thumbs up for your trouble.
@oimpaa2 жыл бұрын
can i swap my old office chair base onto my racer chair my hydraulic has broken can io do a simple swap over
@RightAngleProducts2 жыл бұрын
I personally haven't tried. There's a chance it could work, but I can't say for sure. If you end up trying it out, let me know how it goes!
@StratosNikolaidis2 жыл бұрын
Hi guys, very helpful video - in my case, the chairs are bit old and the base is literally stuck on the gas cylinder. I sprayed with oil for the past 2 days but still, I didn't manage to take the base off the cylinder. Any other idea/suggestion? Thank you!
@RightAngleProducts2 жыл бұрын
Here’s another method that might work better for you: kzfaq.info0O6V5nvgqPY?feature=share
@arafat88ryu2 жыл бұрын
Or, if you aren't that attached to the old base, just destroy the whole plastic base at the cylinder? Use a hatchet, parang or just plain steel hammer.
@jameshetfield29662 жыл бұрын
If badly stuck then definately a ball bearing exactractor is the way and it will get it out rather easy, here is a random link to one just to show how it looks like. If you got a friend who has a workshop they can lend you one, with this tool a very rusty ball bearing is removed from the car wheel hub with ease so this is nothing comparing to that. grabcad.com/library/ball-bearing-extractor-2
@StratosNikolaidis2 жыл бұрын
@@jameshetfield2966 I went to my car technician, who has a small press. It took him three minutes for three chairs! :D
@who-gives-a-toss_Bear Жыл бұрын
@@StratosNikolaidis I did the same in my home made press.
@streetballplayer1002 жыл бұрын
Is there mallet free method to detach cylinder from the base?
@RightAngleProducts2 жыл бұрын
You can also try this. Still uses a hammer but less of a chance for damage. kzfaq.info/get/bejne/ZrVmiZif283VgI0.html
@dbix117 ай бұрын
If anyone has an issue with the cylinder being flush with the base, the remedy to this is to use a peg of some sort to use inbetween your hammer and the cylinder. I used a 1.5 inch x1.5 inch by 3 inch and it came right out after tapping it firmly. Good luck out there bros
@danmiller77093 жыл бұрын
How do you best remove the pistol from the bottom of the seat? TIA
@RightAngleProducts3 жыл бұрын
A pipe wrench works best. You turn the cylinder and it will release. Put the pipe wrench as close as possible to chair because it will mar the cylinder.
@CollosalTrollge2 жыл бұрын
my issue is my wheels dont turn well, so i dont know what to do, so i was thinking instead of buying a new chair just get a wheel base assembly? i.e. when i move in under the desk or away or want to move side ways the wheels scratch they just dont follow. my wife bought a cheaper chair and it works beautifully so my guess its the lousy wheels or the entire wheel base assembly ?
@RightAngleProducts2 жыл бұрын
You just need to replace the casters. Pull one out measure the length and width of the stem and the wheel diameter and search google or amazon.
@walkie0talkie2 жыл бұрын
That helped, thanks.
@RightAngleProducts2 жыл бұрын
You're welcome!
@josephpaz25202 жыл бұрын
Can one Adjust the Base Lower, to Help Reduce the Height of the Chair?
@RightAngleProducts2 жыл бұрын
Not sure what you’re asking. Can you clarify?
@James_Plays2 жыл бұрын
I dont ahve a friend thay can help me.... 1 man job it is! Bottom of my chair broke a while ago but just got a replacement and couldnt get the bottom off. Definitely trying this now
@Nightscream4522 жыл бұрын
I've done everything in this video & the short you recommend, but nothing is working! I just can't get the base off!
@bobyb64653 жыл бұрын
How u remove the metal cylinder
@mrniggelsworth2 жыл бұрын
I had trouble getting the base off to change it out. I used a heat gun and warmed the plastic around cylinder....Popped right out after that
@ZatriX_ZA2 жыл бұрын
Hey, that's an interesting idea! Mine is stuck solid. Will give this a shot. Physics rule ))
@CorbyCave2 жыл бұрын
I have a chair base I have been beating on the cylinder for weeks, and I haven't gotten so much as a twitch from it.
@RightAngleProducts2 жыл бұрын
Instead of the rubber mallet, this technique might work a bit better for you - kzfaq.info/get/bejne/ZrVmiZif283VgI0.html
@arturgacek872 жыл бұрын
thanks
@RightAngleProducts2 жыл бұрын
You're welcome! - CK
@haroldroth45412 жыл бұрын
I just can NOT get the base off of this chair. I have been hammering and hammering. I have used spray oil and.... Nothing. I JUST put this new chair together two days ago. The base just will NoT come off. No idea how on earth to get this done!!!! Help!!
@jetmaster1142 жыл бұрын
Thanks. I was even able to do it without a helper.
@lurkerrekrul2 жыл бұрын
I have never seen a chair where the cylinder sticks out the bottom of the base. The chair I'm sitting in, as well as others I have, the end of the cylinder is flush with the bottom of the plastic, five-star base. I actually searched for a video like this because I want to remove the cylinder from such a base. I recently found a fancy computer chair in the trash (bulk trash, twice a year, the city hauls away almost anything you put on the curb), which was missing the base. It just had the metal rod sticking out. The chair is black and white, and I found a white plastic base, but without the cylinder. I then took a black base off another trash chair by removing the clip. So I have a white base without the cylinder and a black base WITH the cylinder. Now I'd like to transfer the cylinder to the white base, purely for looks. I suppose I can use a piece of wood on the bottom of the cylinder and beat that...
@Marcelo_M.M.2 жыл бұрын
Hitting the piston, even in the border, couldn't damage it?
@TheGregWallace2 жыл бұрын
Question......this is easy to do.....I want you to do a video of you replacing the gas shock.....I want to see you get that out of the metal part of the chair....now that is what I want to see?
@jamesklark65623 жыл бұрын
I've only used it for 3 weeks and slamming it with the force of a 120mph semi, it's not coming loose
@RightAngleProducts3 жыл бұрын
Are you trying to save the cylinder? sometimes you can use a pipe wrench on the bottom but its easy to damage the cylinder. if you can put a little turning motion on the steel cylinder tube when you hit it that can help. Sometimes they just don't like to let go.
@cloud2discokaraoke173 жыл бұрын
Thanks. I understand how to do it now. But three and a half minutes to say "whack it"?
@daniloal1920 Жыл бұрын
My base won’t even budge, any ideas??
@RightAngleProducts Жыл бұрын
Yep, try this. kzfaq.info0O6V5nvgqPY
@magicalpopsicalyt12 жыл бұрын
my base has cracked and wedged the cylinder in it. Im not even sure that WD-40 would help in this instance
@feralheart22996 ай бұрын
I want to replace the star in my home office chair, but all of my friends are at work. Can my GF help in this case?
@emmadalton94492 жыл бұрын
I smacked mine with a mallet to the point it destroyed my mallet and i still cant get it :(
@RightAngleProducts2 жыл бұрын
Sometimes they just don't want to come apart. Try this. kzfaq.info0O6V5nvgqPY
@icy56192 жыл бұрын
What if i got no friends??? :(
@gregO00O Жыл бұрын
you mess up the mallet if you don't hit it square, just saying; wood may help
@user-ve1ok3iy6z10 ай бұрын
Why do you want replace?
@Himeiros Жыл бұрын
For me, it did not work 02:20 because it did not move a single mm!
need to vent, my chair has a flared based and it wont give HAHA
@nah-hakhartmann83432 жыл бұрын
You can actually remove that clip at the top and pull it off very easily no hammer needed! Just make sure you do it carefully so you know how all the bushings and washers go back in.
@teresawhite18452 жыл бұрын
I have thrown away some perfectly good chairs, all because they just needed a base replacement! Well, well!!
@teresawhite18452 жыл бұрын
Now I know what to do. Much cheaper than replacing the whole chair!
@jefindx3 жыл бұрын
Let me try my luck...
@adamhilman37892 жыл бұрын
I just broke the gas shit damn
@smileyzhao2897 Жыл бұрын
I want invite u do a video review for my office chair mat$79.99. do u interest?
@heathrowminicabs2 ай бұрын
there is always one stubborn in every chair
@Justin-bn2ob2 жыл бұрын
thanks, my fat ass bent my alloy base and had to replace it
@lesrreed60087 ай бұрын
didn't work
@arpxdagoodone Жыл бұрын
i'm so pissed of because nothing helps...
@thedr.feelgood2 жыл бұрын
Poor.... the castor removal was filmed from 6 ft away - why not over the actual chair being worked on... waste of time !