HOW TO Remove Scratches/Swirls/Etching From Hard Paint/Clear Coat (Black Or Dark Colors)

Рет қаралды 9,313

Күн бұрын

In this video, I show how to remove scratches, swirls, and etching from water spots on hard, stubborn black automotive paint work.
Phoenix EOD Papa Cut...www.phoenixeod.com/product/pa...
McKees Polish Pads...mckees37.com/collections/all-...
Polishers...www.amazon.com/s?k=shinemate+...
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 9462450
#paintcorrection #autodetailing #cardetailing #apexautodetail

Пікірлер: 84

@apexdetail85 Жыл бұрын

Share your favorite combination for scratches and swirls.

@richsmith3120 Жыл бұрын

The standard, 3D One and the Urofiber 50/50!

@Mdetailing Жыл бұрын

LC orange with sonax PF or Koch F6

@danmorrissette4814 Жыл бұрын

i sometimes go at the Big scratches with ACA500, depending on hardness , i could also combo 3D One , if thin paint i wetsand with 2500, polish with 3D0ne. i love lambwool pads and uro 50/50 ...

@bigd9848 Жыл бұрын

Papa cut with the euro fiber or a orange pad. It all depends how much I have to work with and how deep. I like a lot of different combinations. I learned from the best 👊🏼Thanks Brain

@waynewoodrick5055 Жыл бұрын

Used Papa cut the last 3 days on hammered vehicles. Used 50/50 pad, also med wool pad

@Phoenixeod Жыл бұрын

After getting a chance to sit in on FOUR of your Master Classes last week at the #SDC, I’m still in awe at how easily you move around the vehicle and get the results that you get!!! Glad you’re enjoying PapaCut! FAB Polish and Uro 50/50 is my sweet spot… and my barber would always say, “You can always cut more… you can’t cut less!” Thanks for the video, Sir!

@KevinAClassA Жыл бұрын

SDC was a good time this year, had the chance to meet new and more people.

@MyGuyKirby Жыл бұрын

Agree about the owner changing their ways of maintenance, so stay on the lighter side of correction

@Ricky_R Жыл бұрын

Huge turnaround. I’ve never seen those pads before thanks for showing us 🍻🍻🍻🍻

@ShineYourLightDetailing Жыл бұрын

Excellent demonstration, Brian! Great to see you at SDC and we’ll talk soon. 👍🏼👍🏼

@apexdetail85 Жыл бұрын

It was a pleasure....hope to see you again soon!

@ronayotte3571 Жыл бұрын

This video came just in time.. I have a black Audi A6 coming in on Thursday. Thank you, Brian!.

@kimnewling5728 Жыл бұрын

Nice turn around. Great conversation about paint. Very enjoyable. Thanks Brian.

@apexdetail85 Жыл бұрын

Cheers!

@ThisOldDetailingDude Жыл бұрын

Another incredible educational video! Papa cut is my favorite go to. I see the shop manager right next to you watching closely. I was a true pleasure meeting you at SDC. I apologize for not spending more time with you. But I was exhausted after all night flight. Hope to see you soon.

@tomchinigo5014 Жыл бұрын

Thanks again for another great video where I always learn something new. I need to get my hands on some Papa Cut and give it a try. Also, I had never seen those pads before so I will check those out. My usual go to is Koch Chemie Micro Cut, if need be fine cut or even H9.01 if the surface is in bad shape. I like to team them up with a yellow Rupes foam pad or a yellow Rupes wool pad. The last couple of cars were in good shape so my go to was Uno Advanced and a Rupes yellow pad, one time around the car and call it a day. Thanks again Brian !!

@davestewart9146 Жыл бұрын

I really like these kind of videos, thanks Brian 👍😁

@TripleGAutoDetailing Жыл бұрын

Love these tutorials! Your experience and willingness to share is much appreciated! 👊

@luketuttle1096 Жыл бұрын

Great info as always

@KevinAClassA Жыл бұрын

Thank you Brian, great content as always. Stay safe brother.

@apexdetail85 Жыл бұрын

Thanks, you too!

@lewisreinhold6398 Жыл бұрын

Absolutely excellent video Brian! I am very much into clear coat preservation . Unfortunately, some customers don’t share my concern

@mikeyp2447 Жыл бұрын

Very informative!!

@paulrogers3511 Жыл бұрын

Great job!!

@richardseem7948 Жыл бұрын

Great choices.obviously we are protecting with BC PRODUCT LINE 😆😆

@Hutch400 Жыл бұрын

Thanks Brian!

@MNpicker Жыл бұрын

Awesome stuff Brian!! I know I say that a lot.. but it's true.. This is good shit man🤘🏻😎

@richardseem7948 Жыл бұрын

Awesome video and product review/content good friend

@Chris-wb7ni Жыл бұрын

3D one and depending on the color xtreme solutions polish to bring out that shine.

@J1Z06 Жыл бұрын

I've learned so much from You and this awesome channel, Brian. Thank You for always sharing Your knowledge with us. Another great video. It's time to offer a bottle of "Papa Cut".

@apexdetail85 Жыл бұрын

My pleasure!!

@J1Z06 Жыл бұрын

@@apexdetail85 You're a good Man!! 😎🏎️

@Ichabod_Jericho Жыл бұрын

That’s the most minor swirling I ever saw! It’s far more hazy than swirled. Still sucks workin with paint thinner than cellophane! Great work!

@apexdetail85 Жыл бұрын

The GoPro sucks at focusing so you can see everything. ☹

@norcalspitshine6406 Жыл бұрын

Nice

@fccquoter19 Жыл бұрын

Great Video. What's your go to pad/polish combination for highest one-step cut? I've tried all kinds of combinations and still searching. Just did a Tundra and Uro 50/50 + 3D One didn't touch it....

@jcal5594 Жыл бұрын

Always enjoy your videos Brian. Thanks. I need to pick up a paint depth meter for personal vehicles including Mazda cx 30, Lexus rx 350 and Porsche 993, '95, single stage. Can you recommend one that is reasonably priced? Thanks!

@apexdetail85 Жыл бұрын

Nicety...can be found on Amazon, I believe.

@sharadsookun4983 Жыл бұрын

Hi Can you do a review on surface 60 white cutting pad, i use it and it cuts like a wool with no holograms when used in a DA

@charliekennedy4188 Жыл бұрын

I used h9.02 and flex purple pads. I had Carpro reflect and gloss pads just in case but the Koch chemie left the paint glossy and it did nothing when adding the reflect in!

@slimsampy4764 Жыл бұрын

Why didn’t you use your favorite euro fiber pads.

@StevesAutoNtrucks Жыл бұрын

Do you have a video on ceram x and Rip cut from CSI thanks

@apexdetail85 Жыл бұрын

It dusted like crazy for me....not for me, but that is just subjective.

@danmorrissette4814 Жыл бұрын

so hard to show paint defects when the metalic plays funny with the camera lol!

@Enthusiast_detailing Жыл бұрын

Brian I’m looking to pick up lake country hydro tech polishing pads do you have knowledge on these? They’re on sale and a great deal at the moment

@apexdetail85 Жыл бұрын

Dont hesitate LC is decent.

@whitegoodman7465 5 ай бұрын

Not sure why you would go from a very light white foam finishing pad all the way to microfiber, could have tried out medium cut foam then wool, if that microfiber isnt a one step pad then there is def haze left over.

@bjimsondetailing Жыл бұрын

Good job sir how do I know if a scratch is not removable

@apexdetail85 Жыл бұрын

If through the clean...it will catch a finger nail.

@larrysing Жыл бұрын

I still don’t know how you get those triple digit GUs. I’ve got the same glossmeter & my car, with the best products I can throw at it, has never been above 95.6

@kennethschei6957 Жыл бұрын

Ad quality ceramic coating and you get in the 100👍😊

@larrysing Жыл бұрын

@@kennethschei6957 Nice tip, but really, many ceramic coatings don’t actually increase gloss. Most gloss comes before from prep. A few do like Gyeon Pure, a few from Artdeshine. I’ve used several coatings on my car. The best looking combo was Meguiar’s Hybrid Paint Coating topped with Gyeon CanCoat.

@apexdetail85 Жыл бұрын

Every surface is different. I do not get triple digits every time.

@Mdetailing Жыл бұрын

How do we know if is no less clear coat, but less primer or/and less color paint due to the fact that 1. Newer car have metal alloys that needs less primer and paint according to manufacturers 2. Those ptg cannot identify the separate layer's. Thanks

@dustin3700 Жыл бұрын

Only way to know is to remove the clear and measure. I've tested sun baked vehicles with peeling clear and on a recent 06 scion xa I had readings from .09-1.8 and with clear it was 2.1-3.7.

@apexdetail85 Жыл бұрын

As mentioned ....measure what you are removing. Only a Defelsko (expensive) meter can measure layers.

@Mdetailing Жыл бұрын

@@apexdetail85 thanks sir, keep up The great content ,i admire you

@Amor1990 Жыл бұрын

Where is the Hercules you said would be more videos of?

@apexdetail85 Жыл бұрын

In the making.

@Amor1990 Жыл бұрын

@@apexdetail85thank you

@DerickHo Жыл бұрын

How to remove scratches at door handle bowl? 😢

@apexdetail85 Жыл бұрын

The rotary extension tool is perfect for that.....www.amazon.com/SPTA-Polisher-Polishing-Electric-Stainless/dp/B07V6NLDJ5/ref=sr_1_2_sspa?camp=1789&creative=9325&keywords=rotary+extension+mini+polisher&linkCode=ur2&linkId=fa273ac8f28a04f958ef2e250eb6408c&qid=1686704039&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTEtaRDVFMUpCOTBBJmVuY3J5cHRlZElkPUEwMzMyMDUwM0Q2RE5CMzNZQUtWNyZlbmNyeXB0ZWRBZElkPUEwMDM4NDk5M0FNM1ZHR1Y4QVhHWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

@DerickHo Жыл бұрын

@Apex Detail any product that not require polisher to apply? Because i dont know how to use the polisher 😅 able scare to use also

@leonardcrisci7254 Жыл бұрын

What’s good to use on single stage?

@kennethschei6957 Жыл бұрын

3D one with uro 50/ 50 pad 😊👍

@leonardcrisci7254 Жыл бұрын

@@kennethschei6957 I was told 3-D speed would be a little better but I guess it’s the same shit or very similar

@kennethschei6957 Жыл бұрын

3d speed is a medium to fine polish with synthetic paint sealant blended with Montan Wax. 3d one is a hybrid polish where you can decide from the roughness of the pad etc etc, are you looking for a one step with protection go get 3d speed one of the best yes 😊👍

@kennethschei6957 Жыл бұрын

Have you try 3D AAT Correction Glaze ?

@leonardcrisci7254 Жыл бұрын

@@kennethschei6957 I’m just looking to shine it up a bit. I plan on having the car painted in the next few years but until then I want it to a little better. And what’s the least aggressive procedure it’s a single stage and whatever pad I use with my DA the paint color transfers onto the pad