HOW TO Remove STRIPPED OUT Allen Bolt On MOTORCYCLE Hex Head Bolts Quick Easy Bike FIX TUTORIAL

Рет қаралды 703,492

Күн бұрын

TORX BIT STEEL SOCKET SET T8-T60
amzn.to/2DR90Ui
How To Remove Stripped Out Allen Bolts On Motorcycle This Is A Hex Head Bolt Broken Removal Quick And Easy DIY Fix Step By Step Tutorial Video! This video clip shows what to do when you have tight broken stripped out hex allen bolt on street bike or dirt bike. Watch as i show you how i fixed my motorbike bolt that the hex allen head was completely stripped out and was able to unscrew and loosen stripped allen bolt or screw quickly in only minutes without any special tools or easy out tool without damaging bolt threads. You'll see me screw out stripped out hex head allen key bolt using torx or star bits removing all of the broken bolts and fixing my sport bike stripped allen head bolt the fastest way i know how in this stripped bolt repair tutorial. This trick i show you in this video on how to take out stripped head on hex bolt also works for broken off bolts to remove bolt stud on Yamaha, Honda, Suzuki, Harley Davidson, & Kawasaki street bike, dirt bike, scooter, supermoto, enduro, mini bike, & pit bike doing the same easy quick and super fast steps for bolt stud extraction. Thank you for watching this stripped allen bolt hardware fix tip for your motorcycle and good luck getting out your stripped bolts and bolt studs! Please enjoy this video clip!
TORX BIT STEEL SOCKET SET T8-T60
amzn.to/2DR90Ui
ULTIMATE DRILL BIT SET 115 PIECES
amzn.to/2GoXjCB
DEWALT 20V 3 SPEED DRILL
amzn.to/2DRmBL8
3/8 INCH RATCHET WRENCH
amzn.to/2Eh5P5L
Please SHARE, LIKE, & COMMENT
Visit BLOX STARZ STORE Click Below
BLOXSTARZ.com
Please SUBSCRIBE Blox Starz TV For NEW Videos Click Below
kzfaq.info_c...
Watch MORE BIKE TECH TIP & TRICK Videos Playlist Linked Below
• Dent Stunt Bike Gas Ta...
Watch MORE Cops VS Bike POLICE CHASES Playlist Linked Below
• Video
Please CONNECT With Blox Starz TV
INSTAGRAM: / bloxstarz
FACEBOOK: / bloxstarz
KZfaq: / bloxstarzlifestyle
TWITTER: / bloxstarz
GOOGLE+: google.com/+bloxstarzlifestyle
TUMBLR: / bloxstarz
VINE: vine.co/bloxstarz

Пікірлер: 447

@PhinAI 7 жыл бұрын

I must give credit where credit is due. This video resolved a four-hour perplexing struggle in two minutes. Where screw removal techniques were tried and failed, this succeeded. A titanium bit broke off in my bolt as I was setting up to apply an extractor. This was a saver! I used a breaker-bar instead of my ratchet. However, the student is never greater than his instructor. Thank you for your help!

@BloxStarzLifestyle 4 жыл бұрын

BOOM BABY!!! That's what i like to hear! Thanks I'll take all the credit i can get LOL Glad it helped

@Ryan-ji5kw 6 жыл бұрын

Rarely anything goes as planned working on your bike I feel it 😂

@BloxStarzLifestyle 6 жыл бұрын

YESSSSIR

@aidanmcnutt994 3 жыл бұрын

Cant go smoothly, wouldn't be as rewarding

@angelpaniagua2624 3 жыл бұрын

my clutch bolts are stripped asf🥶

@DagupanCityBangusFC.dcbfc2014 3 жыл бұрын

😂😂😂😂

@TigerChi30 3 жыл бұрын

FACTS!🤣

@therealrandygriffitts 4 жыл бұрын

Technique="GOLD" Commentary= "PRICELESS!" Glad to see there are still other "like minded" people out there! Thanks my Brother...

@mickknacks 5 жыл бұрын

I been trying to get this damn bolt off for days bought different type of extractors to no avail. Watched this video grab the tool and 3 minutes later I was dancing in my garage! Thank you ever so much brother!

@garym0ikw214 5 жыл бұрын

You absolute legend... I just extracted a rounded 5mm hex head from my nissin break calliper using a T40 torx key bit... tapped it home with the Hammer, and hey presto... she’s out... save my a small fortune on a new rear break calliper... You the man..... From Gary Yorkshire England...... 👍🏍🇬🇧🇬🇧🇬🇧👍

@BloxStarzLifestyle 6 жыл бұрын

TORX BIT STEEL SOCKET SET T8-T60 amzn.to/2DR90Ui ULTIMATE DRILL BIT SET 115 PIECES amzn.to/2GoXjCB DEWALT 20V 3 SPEED DRILL amzn.to/2DRmBL8 3/8 INCH RATCHET WRENCH amzn.to/2Eh5P5L

@aflyinggoat 5 жыл бұрын

Guys like you make me proud to be an American. Great color commentary. Needed this advice for my mountain bike stripped allen derauillure hanger. Great job bud!

@kmccary 7 жыл бұрын

Worked like a charm for me after the so-called bolt extractor kits failed miserably. Props for posting this up, sir!

@alexcinalexcin7983 7 жыл бұрын

Great idea. 👍

@deadsred7786 6 жыл бұрын

I didn't even need to drill out my stripped Hex Bolt. I simply used a slightly larger torx head driver and it worked well after adding some penetrant and heating it with a blowtorch for a shirt period. This worked great and saved me a lot of trouble. Thanks for the tip.

@chadpino6222 4 жыл бұрын

Wow! I never comment, but I just wanted to thank you! I'm restoring an old dirt bike, and this saved me big time!

@Hermonvstrom 3 ай бұрын

Mate you just saved me a massive expense. I tried extraction drill bits etc, no luck. Came across this video and tried it. I couldn't believe it, but it worked. Thank you so much. The mechanic had quoted me £50.

@tonyrdr7207 5 жыл бұрын

Great article mate very good description, love the way you outlined all the tools and showed the process step by step Thanks

@billsteinhouser3454 6 жыл бұрын

Quit beating the kid up. He's a creative problem solver, which are almost extinct these days. I don't know why I didn't try this before I watched his video. Without the drill, I had two allen bolts extracted from my Harley in less than 3 minutes.

@chrisrock340 2 жыл бұрын

This video was a lifesaver today! Worked like a charm! Took me a while to get my torx head out of the stripped bolt when I was done, but that’s a testament to how well this worked!

@dmulhauser1 2 жыл бұрын

I know this post is 4+ yrs old but I needed it today YOU ROCK!!! It worked great on a countersunk Allen on a power running board on a Ford Expedition took like 8 minutes!!!!!!!

@TupacAShakurAfeni 6 жыл бұрын

DUDE, YOU ROCK!!! Thank you! 01 ZX6R, 1230 miles bought it from a Hot Chic k. Hex heads were factory tight. On the LAST ONE, STRIPPED IT. Found your vid and it is a life saver. ROCK on.

@2flush2flush80 6 жыл бұрын

Your idea worked right away for me. I was screwing around for an hour with that bolt, till your idea. Thanks ! !

@nichooconnor4507 5 жыл бұрын

Thank you so much for posting this! I was having a ton of trouble working on my bike and this worked perfectly! The one thing I needed to add was going back in and drilling more material out a couple times after hammering it in there until the bit was lodged properly. Might help others to know that. Again great video and thank you!

@sendermx2394 6 жыл бұрын

Man I can't thank u enough u saved me 500+ dollars I almost sawed the top end of my bike off beacauw the 2 Cam cover bolts were stripped thanks u so much

@Jaxson_da 3 жыл бұрын

Omg... I feel your pain. That is the first thing that I thought of lol...thank GOD for KZfaq and critical thinkers 😬

@nhatthanhnguyen1008 3 жыл бұрын

Where i can buy those tool

@parkerdahl6065 5 жыл бұрын

Thanks i thought I was out of luck then I went on KZfaq and seen your video i tried it and I worked first try. Thanks again

@patdarko 5 жыл бұрын

DUDE.... I never comment on videos but this saved me big time. Thank you for putting this video out, much appreciated!

@Jaxson_da 3 жыл бұрын

Same

@rsjdawg1 2 жыл бұрын

DUDE YOUR THE BOMB DIGITY YO! I used your method on my Bauer wood planner. The rounded shaped Allen bolts were stripped. Your method got two stripped bolts out in seconds... THANK YOU SO MUCH!!! MY PROJECT CONTINUES. Didn't even mess up! 🤗

@marshkid1 5 жыл бұрын

You saved me today, thanks so much! M8 hex head driveshaft bolt stripped, takes a 6mm hex key. I used a 9/32 drill bit and T45 torx with your method and it worked perfectly. I tested multiple different drill bits on a spare bolt before I tried the stripped one. 19/64 was too big, and 17/64 was too small. The 9/32 (18/64) was the right size for the M8 bolt, with 6mm hex key and the T45 torx. Hope that helps someone save some money on bits :)

@ruz6135 4 жыл бұрын

Thank you so much! I stripped a tiny screw on a lathe tool holder at work so I found your video and didn't have to ask for help lol this method worked easily!

@bowserboy101 5 жыл бұрын

Worked 1st time for me on head bolts. Thanks man

@sethwilsonn 2 жыл бұрын

Worked like a charm! Had a Allen head bolt stripped on the bottom of my van when they mounted the cabinets. This worked in about 2 minutes. Keep up the good work man

@bundasauresrex1695 5 жыл бұрын

Dude,..thank you!! You saved me time and money,..worked on the first try on 2 different stripped Allen bolts,..thanks man

@snowgo5922 4 жыл бұрын

2:35... just made this video totally entertaining! I was not expecting it whatsoever, but it made me chuckle.

@marksatterfield3100 4 жыл бұрын

Straight forward. Done and done. Good job. Thanks for sharing.

@iBrows1 4 жыл бұрын

3/7/2020 - this video saved my ass after a week of trying all kinds of tricks to extract a stripped bolt.

@awesomeguy-vp4ye 3 жыл бұрын

Had almost given up hope of removing a rounded rearset bolt on my gsxr 1000 k6 and was resigned to calling in a professional when I came across your video. It worked first time. Your a lifesaver. Thanks very much 👍👍

@himalayantrails4397 3 жыл бұрын

To everyone visiting comments before watching the video. This is it.. this guy solved it by a simple trick. Awesome dude ❤️

@itzikcohen2866 4 жыл бұрын

Man you're a life saver, I just trying 3 hours to remove the Allen bolts to change my brake pads, I almost give up, and after I saw your video, I just got back to the garage and change them in 10 min! Thank you very much for that!

@whitneyjill4987 5 жыл бұрын

I had 1/2 hex bolts that were MEGA stripped I had to figure out how to remove from the cubicles in my office. I am so HAPPY say we got those suckers out in less than 8 minutes using a slightly modified version of your method!!!! AWESOME reference and demo FOR SURE... 2 thumbs up!!!!!!!!!!!!!!!

@ericroutledge2002 5 жыл бұрын

Brilliant!!!!!... Spent all day trying to get a rounded allen bolt out with no luck. Found this video and it came out first time. Thanks for posting as I think I would have still been trying.

@thaicalder 6 жыл бұрын

Amazing. Worked like a charm. I needed to use a larger bit than I had my Allen tool was and then it worked awesomely.

@elitrinh8436 4 жыл бұрын

Holy crap thanks for this. Worked perfectly.

@MrFelipe8686 3 жыл бұрын

Dude you freaking saved me! Had to remove the clutch cover to paint it and when I installed it back, clutch wasn’t engaging so I knew I had misaligned the rod...stripped a screw in the process of removing it again, and your technique worked in the first try!

@woodypaq 6 жыл бұрын

This was key to removing a screw that was stripped from the last time a brake job was done, and like you said, should not have been reused but it stripped easily. Your advice helped me to complete the job myself and I appreciate the good and helpful video.

@edhuck5664 6 жыл бұрын

This worked awesome! I had three bolts that were stripped out when replacing blades on a 6" Porter Cable bench top jointer. This exact method worked perfectly. I thought I was screwed until I found this video, thank you for this video!!

@brianhiggins9220 6 жыл бұрын

I can’t thank you enough for this tip. I was putting saddle bag on my wife’s bike, and the previous owner striped the torque bolt, and this worked perfectly!! Again, thank you very much!!

@billy1858 6 жыл бұрын

ive just used this method on 3 bolts on my honda 919,lifesaver! thanks from the uk.

@NeilTakahara 4 жыл бұрын

Thanks for posting. I followed your steps and I also hit the bolt with some penetrating oil for good measure. Saved myself a lot of aggravation!

@korosz1118 6 жыл бұрын

Heyo, Thank you so much for posting this video! I had a ceased Allen bolt fastener for the quillstem of my bicycle and your video totally made it possible for me to successfully remove it. 😊👍👌

@battlejitney2197 5 жыл бұрын

Dude, I seriously had my doubt s but this totally worked! Thanks for another trick for tool box! Ride safe, man.

@claytongley3033 5 жыл бұрын

Thanks Bud!! Had 3 out of 5 stripped bolts on my Harley derby cover. Didn't even have to drill. Tapped in the star bit, all 3 came right out. Put star replacement screws in to hold the cover, was still able to use the same star bit because it was not damaged. Very cool and quick trick!!

@evandovskaya1266 5 жыл бұрын

You made my day trying to open a scroll saw clamp. Thanks pal.

@michasektas3421 4 жыл бұрын

Got my allen stripped and stuck inside the fork tube, found this video. 2 minutes with star key and hammer, bump, fixed! Thanks:)

@HorsepowerFS 6 жыл бұрын

You just saved me Man! Restoring a 89 yz250 and got hella stripped Allen bolts haha

@blainewilson129 4 жыл бұрын

Thank You, I'm able to finish a job on time because of you and put 350 bucks in my pocket I otherwise would have lost. Again, Thank You!!!!

@mcnibbles2708 7 жыл бұрын

Did the same thing with a valve cover bolt on my Bandit 1200, didn't even have to drill just found a torx bit that fit snug, gave it a few taps with a hammer and it came right out with a good tug of the ratchet.

@ArranNorth 6 жыл бұрын

Thanks for the tip. Really got me out of a sticky situation today. Didn’t need to drill in the end. Just hammered a slightly larger T piece into the hole and voila ! Cheers man.

@caryrhode5164 6 жыл бұрын

I had stripped a bolt at the bottom of my fork, and I was beside myself. Your tip worked great and saved me from the deep end. Thank U Mr Dude.

@rpoz11 4 жыл бұрын

Thanx for this video. Your process actually resolved my stripped hex head issue. With a proper drill bit, I was able to create the necessary opening for a torx head bit. It worked! Was able to remove 2 over torque disc bolts. Problem solved!!!!

@Carecovzki 7 жыл бұрын

Man you just saved me a lot of trouble with your tutorial. Thanks a lot!

@BloxStarzLifestyle 7 жыл бұрын

Hell ya glad it helped you out!!!

@twarmker 6 жыл бұрын

Carecovzki same here!

@naterobertson3366 Жыл бұрын

Thank you so much for making this video brother! You are a godsend my friend! Your commentary was what made the video even better LOL sure do appreciate you my man God you and your family stay safe out there

@bryan2287 5 жыл бұрын

Preciate the advice Chief. I just tried this on my 14 and it worked. I used a 45torx and a 13/64 drill Bit. Hope this helps anyone else. Thanks Again

@Jaxson_da 3 жыл бұрын

Still helping today...October 2020😬

@joshdavis3127 5 жыл бұрын

I was pretty skeptical that this would actually work but I used this method on some of my exhaust bolts on my R1 and It worked like a charm, i heated the bolt up with a blow torch to help it out as well. Saved me from buying a an extractor kit.

@sourcefollower 6 жыл бұрын

Thanks so much for posting! I watched ALL the videos on youtube on how to remove hex bolts and yours actually worked first time and didn't require me to spend $150 on special tooling!

@Jaxson_da 3 жыл бұрын

Right...this was the only vid I cld find as well that actually worked and didn't require I spend money unnecessarily.

@sourcefollower 3 жыл бұрын

@@Jaxson_da didn't work for you?

@Jaxson_da 3 жыл бұрын

@@sourcefollower yes it did!!

@moto__shark 7 жыл бұрын

Thx for the tip dude. Def do more how to videos.

@BloxStarzLifestyle 7 жыл бұрын

Hell ya thx u for watching i always see a bunch of your comments on all my videos thx u again for all the support brother!!!

@INeverWanted2010 5 жыл бұрын

About to try this on my buddy's bike, thanks so much!

@etownump 3 жыл бұрын

Thanks man! I just used this method to remove a stripped hex bolt on the rear sprocket of my Honda crf250l. Your vid was a life saver!

@retronaut6396 10 ай бұрын

Thanks. This really helped me finally get out 2 stripped bolts that I had been struggling to shift. Amazing how such a tiny thing can be such a pain. Cheers.

@Jaxson_da 3 жыл бұрын

Well...you just rock. Im a girl..and still a new rider. I have a Honda shadow spirit 750...cant always afford to put it in the shop and when I do i get ripped. YT is my go-to..and your vid was among the first and the only one I clicked on. Cant say thank you enough!

@dylanwelsford6391 4 жыл бұрын

Great video, simple but elegant solution

@tomastomasius8985 6 жыл бұрын

Perfect i had problem on MTB but with your solution i made it(inbus 5KO and then i did it with torx), it really works, thanks! :)

@jeanjagodzinski5115 6 жыл бұрын

Worked on my bicycle seat post clamp on a smaller scale. After watching this, tried hammering in a slightly larger Allen wrench, as I didn't have the right size star bit, and it worked like a charm.

@constantbuzz 6 жыл бұрын

Thanks, good video. This technique worked to get a stripped allen drain plug out.

@SacksThriftAve 4 жыл бұрын

"Subscribed" your the MAN! Worked!!!!!!

@sarahjeanne8267 4 жыл бұрын

Thank you! I watched a bunch of other videos, but this one worked no problem!! :)

@Jaxson_da 3 жыл бұрын

Same ..

@TeamDeafmatch 6 жыл бұрын

Thanks for this vid mate! It worked out fine and saved my Airsoft replica !

@BillPettersen 6 жыл бұрын

Thanks for this Allen Key video. Needed a solution and found this video. Worked great. Thank you very much.

@yoboo6167 5 жыл бұрын

Badass, I had forgot all about this trick. Thanks!

@tristanmiller5215 6 жыл бұрын

thank you so much mate, just managed to get it out using this method and replaced all the crappy cap screws with new ones.

@rwinter1376 6 жыл бұрын

Great video!! I have just tried two bolt extra kits and neither would work because the Allen head was to shallow, tried to drill the centre to use the easy out on the shaft of the bolt but it’s hardened steel!! (On an exhaust header) tried this method and to my surprise it worked 👍 thanks a lot man!!

@karentsang5149 7 жыл бұрын

ty! spent an hour trying remove 2 stripped out allen bolts and this took 10 mins :)

@johnnewland1014 4 жыл бұрын

Worked like a charm! Thank you!

@RobertSmith-mv5qw 6 жыл бұрын

Worked perfectly for me. Thank you.

@edgeofentropy3492 5 жыл бұрын

This works! In my personal experience I didn't have to drill, but I had really stripped the inside of the bolt. The inside of the bolt was large enough to hammer in the torx bit.

@allenjgrove 5 жыл бұрын

I really have to thank you for this, it's really saved me a massive headache. Thanks dude

@Jaxson_da 3 жыл бұрын

Agreed

@brucedewese7847 4 жыл бұрын

Worked perfect!!!! Thanks for the help.

@acicuttini 5 жыл бұрын

Awesome technique, worked a treat!

@RobBastien 6 жыл бұрын

Thanks buddy, that did the job for me!

@GVMotoring 3 жыл бұрын

Gonna try this out tomorrow!! Love the commentary lol thanks for the video

@DJBigMac209 6 жыл бұрын

Great job brother. Always cool when it works for the camera the first try. Thanks for the Info, im mon a yamaha and that will help out alot.

@richardt2353 3 жыл бұрын

You Sir, are a God. A man amongst boys. A true hero! That's right, dammit! You solution worked like a charm on a brake caliper on a 22 year old truck. I cannot thank you enough.

@kellymote5849 15 күн бұрын

I just saw this is 7 years old. But so helpful. TY😊

@peterdavidhudson 6 жыл бұрын

Thanks bud! Hadn't thought of that, and it worked a charm, even with a small bolt.

@OpenThrottle5 7 жыл бұрын

one of the best tutorial videos i have seen till date....

@BloxStarzLifestyle 7 жыл бұрын

Thx u!!!

@buddyboy1953 5 жыл бұрын

I have the same problem but mine is on my Kubota tractor. You got it correct, and there is no other way. At least that I am aware of !!! You nailed it !!!

@MrOpenyourmindplease 7 жыл бұрын

Very Nice video! Thank you for those tips, will try this tomorrow again after the rain (working with my chevy Uplander, change hub)! Must have a Hinniken now instead got to get relaxed! Thanks again brother! /Andreas Sweden

@phillman5 5 жыл бұрын

I have a 2.5 mm flat head with a hex that was was stripped. The hammer technique Billy Michell suggest wouldn't work as bolt head is not exposed. I just epoxied a 2.5 wrench in, but this technique should take less time IF I could support the bicycle some how while hammering torx in place, I didn't find it until I came upstairs to let the epoxy dry.

@2WheelsLiving Жыл бұрын

Woohoo. One more confirmation here of this method, it worked great! Took me 5 minutes

@jeanjohnnyg.2276 6 жыл бұрын

Great tip! Thanks!

@jonathancolby9625 3 жыл бұрын

Dude you saved me so much time thank you big thumbs up 👍 you rock

@fullhog 6 жыл бұрын

Thanks for the tip.. I did it without drilling. Worked first time 😁😁

@lawrencechristianweaver9283 6 жыл бұрын

fantastic!! I did everything you did to take out 18 rounded allen stainless button bolts from the brake discs on my ducati monster. I also ground a sharp flat on the tip of the star-bit, so it would bite into to allen bolt hole. cant thank you enough.