How to remove the dolly tire

Рет қаралды 90,681

abbas jackson

4 жыл бұрын

Hiw to easily remove the washer

Пікірлер: 75

@seanheadrick 3 жыл бұрын

a little too talkative for my taste, but extremely helpful!

@abbasjackson5459 2 жыл бұрын

Why would I bore you with bla bla bla when you can see it for yourself, Appreciate the coment

@jasont7814 8 ай бұрын

Dude, you’re a lifesaver. Worked like a charm. Tractor Supply tires, $14.99 each. Thank you!

@CookieZ3353 3 жыл бұрын

I'm 63 and I did it with a small crow bar, a hammer, and WD-40. Thank you. I replaced my flat tire with a "no flat" variety. (However, I'm whooped!)

@BlueRidgeKat1 2 жыл бұрын

You go girl !!!!!!!

@randymaclean2707 Ай бұрын

The circular clip comes off the shaft without all the prying if you simply grip it at the edge with waterpump (large) pliers and rotate it counter-clockwise. The tabs are slightly angled, so it will spin off like a nut. This trick saved me a ton of time and effort.

@theghostwizard6745 5 ай бұрын

Genius. Thank you for not talking for an hour to explain 2 steps. LOL

@williamgarcia9602 2 жыл бұрын

Thank you the wheel was put on backwards, but still helpful.

@abbasjackson5459 2 жыл бұрын

On purpose

@folsomtransport 3 жыл бұрын

Cool this is the first one that showed me how to get the cap off! Took me less than 5 minutes to do it. Thank you!

@JesseCanchola 10 ай бұрын

Thank you so much! This did the trick. I WD-40'd then used the claw of the hammer to remove. Hard part was finding the replacement locking washer at either Lowe's or Home Depot. Found them on Amazon as key words: Internal Tooth Starlock Washers, Push On Locking Washers, Speed Clips, Fasteners.

@briandimascio3624 7 ай бұрын

U can reuse the push nut. I used channel locks to deform the edges instead of a hammer and then bent it back with a small adjustable wrench while holding the other side w channel locks so it is too tight to slide over the axle. Find a socket that will clear the 1/2or 5/8” axle and hammer it over. The teeth will lock

@demlafields1806 Жыл бұрын

You tube videos have saved me 75.00 today, a guy was going to charge me to change the tire. Hod Bless U-tube

@novoselpro 2 жыл бұрын

EXACTLY what I was looking for. Thank you!

@donnieg.6976 Жыл бұрын

This was perfect. I was able to change both wheels in less than 10 minutes.

@whitewebshaunt4798 Жыл бұрын

YOU ARE THE MAN!!!! Thanks for this video.

@stevebarratt4291 3 жыл бұрын

Love it man, saved me 10 minutes watching the guy that was figuring it out on camera...holy s#!t...

@gison8405 Жыл бұрын

fuuuuuuuuck - SERIOUSLY!!!

@laurannaroach2559 Жыл бұрын

Ok smarty pants, you guys make it look so easy! Thank you for posting!

@BlueRidgeKat1 2 жыл бұрын

Where do you get the new lock washer thing?

@mikethetooth 2 жыл бұрын

I wish all how to videos were straight to the point like this. Excellent video! Thank you

@jakecapshaw6391 4 ай бұрын

Thanks lol I needed that!

@NukeBreath 5 ай бұрын

Thanks for the video. I saw another video that helped me out also. Using a pair of vice grips. Using a pair of plyers made it easier for me. Squeezing the washer distorted it and made it a lot easier to then pry off.

@nickh.3832 3 жыл бұрын

Worked like a charm .

@chasebrunner 2 жыл бұрын

Appreciate It Brother !!!

@tbluemel 2 жыл бұрын

Thank you VERY MUCH!

@mickhill2209 2 жыл бұрын

How is he going to inflate the tyre. He`s put the wheel on the wrong way , the valve is now on the inside.

@TheGokartGuy 2 жыл бұрын

He installed a solid tire that uses no air .... Flat Free.

@hlittell Жыл бұрын

Fantastic. I guess I could have pryed it off, but the WD-40 and socket with the small claw hammer!! Thank you for posting this..

@joemcsorley1528 2 ай бұрын

fantastic! Thanks

@anthonygonzalez281 Жыл бұрын

Perfect, how to video! Not all that extra yapping

@rsgblue Жыл бұрын

Excellent , made it easy with correct tools and trick

@Planespotterdude 2 жыл бұрын

Ty so much. These things tick me off, I’m replacing mine with the cap style nut

@720ET 3 ай бұрын

New tires look bigger, I like them. What size are new tires?

@watchthesuit1683 2 жыл бұрын

Thank you!

@viva7642 2 жыл бұрын

EXCELLENT!!

@HectorCanon-fh9yi Ай бұрын

me interesa me podría brindar información

@jorgefraiche 5 ай бұрын

Thank you

@BeatdownRevival Жыл бұрын

100% Excellent!!!

@VeesFunkyAZZshop 9 ай бұрын

found this video after i just got frustrated and bust to SH@# the entire tire and lost the fixtures

@rocketrider1405 Жыл бұрын

What size socket did u you use to install that ‘ring’ at 1:23 ?

@joehill8014 11 ай бұрын

excellent video.

@user-yx9jg6lz5s Жыл бұрын

Do you remember what size socket you used to install that ‘ring?

@mtsanchez27 Жыл бұрын

Where did you buy the tires?

@andreib.618 9 ай бұрын

Hi . Where did you bought the new tires from and how much are they ? Thank you

@awells5891 2 жыл бұрын

Thanks

@Castleknight 2 жыл бұрын

Did a new push nut come with the replacement wheel?

@abbasjackson5459 2 жыл бұрын

No , it does not

@user-pl2ug3vd5d 6 ай бұрын

Dude, You put the air stem on the inside.

@lazerbro8847 3 жыл бұрын

I know how to seal the bead you put a strap around the dolly tire and you put air in it

@JesusRamirez-ho7cs 2 жыл бұрын

Chingon👍

@rajkumarghattri8274 2 жыл бұрын

chahekoo chha

@biggerscranerealestategroup Жыл бұрын

Are dolly replacement wheels all the same size?

@erosh6012 Жыл бұрын

No depends on the dolly some are bigger

@beetlerunner 2 жыл бұрын

Ok so I did what you did and removed that little metal piece which allowed me to remote the tire but the metal piece broke in the process. So now I can’t secure the new tire. Suggestions?

@abbasjackson5459 2 жыл бұрын

Are you talking about the washer that i removed with the hammer? I think you can find them at home depot just bring the broken piece and show it to an associate .

@beetlerunner 2 жыл бұрын

@@abbasjackson5459 the first piece you removed. I found some on amazon thanks.

@carlosrivera4660 3 жыл бұрын

I cannot get that part of. How you doit. Please help?

@tacokiller5638 3 жыл бұрын

Just get two flat heads and try to pry it out.

@carlosrivera4660 3 жыл бұрын

@@tacokiller5638 thanks. I try that for one hour. It didn’t work. 🥲🥲 thanks anyway. 👍👍

@sevennumberss 4 ай бұрын

You put the tire on backwards.

@JoseTorres-st5ic Жыл бұрын

I would have put the new wheel with tit part down. Nice job though

@edaycock3505 2 жыл бұрын

Really doesn't matter which side the valve stem is on, but normally on the outside

@erosh6012 Жыл бұрын

There is no valve on this type tire. Its solid rubber type

@ravenbonanza1522 Жыл бұрын

1:08 He put the wheel on the wrong orientation. That portion should be at the back side. How can you inflate the tire if the tire valve is on the back of the wheel?

@jasont7814 8 ай бұрын

No inner tube . Solid wheels.