How To Remove Your WRX Transmission

Рет қаралды 21,936

3 жыл бұрын

I Hope you all enjoy the video! Please LIKE / SUBSCRIBE for more content!
ACT CLUTCH KIT 06-2020 WRX: www.rallysportdirect.com/part...
Vivid Ti: vividti.com/
Website: baderbuilt.shop/
Instagram: _baderbuilt
Email Contact: baderbuiltracing@gmail.com
Tuner: Jrtuned
Tuner: Stevetuned
Tuner: Roni Built
Fab Shop: Ranchbuilt
SPONSORS:
-Outfront Motorsports
-Jrtuned
-Prime Motoring
-Torque Solutions
-IAG Performance
-Manley Performance
-P & L Motorsports
-Extreme Turbo Systems
-REAL STREET Performance
-AEM
-Stevetuned
-Jonny_Trans
-Cylinder Head Service
-M & H Tires

Пікірлер: 50

@Kiss__Kiss 3 жыл бұрын

Thanks for a channel update _BaderBuilt always appreciate it when channels update their subscriber base periodically.. Not only does it show progress within the channel but, communication in terms of thanking their subs...

@fitprogressions 3 жыл бұрын

I'm doing my clutch job this weekend on my 08 wrx. Super helpful to see you do it thank you man for making this and sharing with us. Fingers crossed it comes out and goes back in smooth

@JacksonSugar 3 жыл бұрын

I literally have to do a clutch on my ‘14 this week! You are the greatest of all time!

@paulmarsdensr8199 3 жыл бұрын

Wow a 2010 WRX. Showing how far subaru engines have evolved. Great video stay safe 🙏.

@cubedcorefpv165 3 жыл бұрын

Thanks for another “how to”. When I can finally work on my car I’ll be using these for help. Someday I want build a rally car for my wife and me.

@fishua5564 3 жыл бұрын

You should put a DIY area in the playlist section of youtube and put the super in depth vids on it.... vs your normal vids which are fairly in depth. Great stuff!

@james94582 3 жыл бұрын

This is awesome... Now if only I had a driveway, or even better a garage space... Unfortunately I'll have to pay someone else for their services.. Wish I lived closer... I'd love to have someone who knows their stuff and is willing to share that knowledge work on my WRX

@emilvafin22 3 жыл бұрын

video ends 21.24 blank screen then 24:30 song starts lol

@thespoolybois6 3 жыл бұрын

Gotta watch threw it to give him the watch time

@Marc0Bece 3 жыл бұрын

I set my old car on fire when I was replacing the high pressure fuel pump, which was really close to the starter. Needless to say, I totally forgot step 1 and I didn't disconnect the battery and it went up in flames. I got lucky and I was able to put it out quickly and get a new wiring harness and I was able to rebuild some connections for some cam sensors but it was almost a total loss. But yeah, never skip step 1 lol.

@thespoolybois6 3 жыл бұрын

Great video this helped me out a lot. Question Have you ever had or just worked on a gc8, i was thinking if you put your whole new drag setup in a striped gc8 i bet you would reach your quarter mile time goal alot easier

@kchanguito 3 жыл бұрын

Amazing just in time

@ishootrtwingers 3 жыл бұрын

Love the "how to" content!

@Robert-un3cf Жыл бұрын

I know this video's older, but I just appreciate it nonetheless. I'm trying to decide if I should attempt this job in my small garage.

@garfieldmaxwell9211 3 жыл бұрын

Bader I watch ur videos alllll the time. Surely u r my tutor, big time. Love the work u r doing. I've a 06 WRX STI & is about to start mods on it. What' the recommend mod to start with ?

@brianforman1516 3 жыл бұрын

Bro what do you do for work or is this your job? I love all the content and can’t wait for you to get a shop!

@cubedcorefpv165 3 жыл бұрын

This is what he does. Engine building and repair, and KZfaq. Making all of us envious.

@hstorres1979 3 жыл бұрын

Who cares,,, learn and enjoy the videos!!!!

@oscarontiveros5117 7 ай бұрын

You the man

@albertl8214 3 жыл бұрын

Thank you!

@erwinmorales2862 2 жыл бұрын

Wish you were in california ! Lol great video

@lancet6680 Жыл бұрын

You mentioned the casings were pretty seized up on the dowels, how did you handle that? I'm doing a 15 WRX now and I can't get the cases sperated. Right now the dowels are sprayed down with penetrating oil. If that doesn't work I thought about adding heat.

@matthewb2060 Жыл бұрын

What size jack stands are needed for this, is 6 ton enough, or would you recommend 12 ton. Do you know about what height the car needs to be lifted for this repair? Thanks!

@jonesb930 Жыл бұрын

Question: at 5:32 I can see a gasket for the intercooler to turbo. The OE uses an Oring. I also have an aftermarket TMIC and need this gasket. Can you tell me where you got it or a part number/mfg? Great video by the way. I am doing the clutch in a 2011 WRX in my driveway on jack stands right now.

@AlvinD88 3 жыл бұрын

Move to Chicago we will need you here lol

@jpshanuson7192 3 жыл бұрын

Miss my black on black skinny WRX. Was considered the red headed step child.

@jacobkabitzke3517 10 ай бұрын

As far as the clutch linkage, I think you skipped over that part, any help?

@fidelquintana7037 3 жыл бұрын

Would you recommend to drop the transmission or pull the engine for a clutch job? I’ve seen you do both what do you prefer.

@jakubclash7629 3 жыл бұрын

If you have a pit or lift it's way easier to remove the gearbox. If you have your car on jack stands in wrx I would go for gearbox, in sti engine.

@HanSloroll 3 жыл бұрын

wish you could just build a shop in the dirt lot where you park cars. i feel spoiled watching you work out in the cold lmao. wtf with that throw out tho!? idk if i ever seen one that trashed

@tommyrobblee9391 3 жыл бұрын

Wanting to pick up a used wrx. I do all my own work on my cars. I was wondering what year you would suggest for a Subi newbie. Love your content

@sssnake2332 3 жыл бұрын

What are your budget and goals for the car?

@whatiwant8898 3 жыл бұрын

If you want the least problems and the easiest to work on then a 15+ is probably your best bet. Definitely easier to work on the FA than the EJ.

@HPLCurt 3 жыл бұрын

Anything other than an 08 WRX they are the lowest hp for its bodystyle, has a TD04 and they don't have good suspension. any year above or below that is fine, just make sure you do a frame inspection and everything if it's used from the dealer. :) Hope that helps

@tommyrobblee9391 3 жыл бұрын

@@sssnake2332 I have a minimal budget. Just want something fairly reliable that I can throw a few bucks at when I have it. Maybe just a weekend car. Had a 85 rx7 for a while. But I really like the body and the all wheel drive of the WRX. The more I watch this channel, the more interested I get

@sssnake2332 3 жыл бұрын

@@tommyrobblee9391 I'd go for 2005 - 2007, or if you can afford it, 2011+. Personally some issues on the 2002 - 2004 are deal-breakers for me, and the 2008-2010 are my least favorite designs. Again, all depends on your budget and preferences. I really want steering wheel controls, for example, so I wasn't looking at pre-2008 models, and didn't want 08 - 10 so a 2011 was my desired year and I happened to find a low mileage '11 STI with a lot of good mods, new stage 2 short-block, and stock fuel system and turbo so it was under 300WHP, for $18k. But for a cheap hobby car, you could probably find a decent older WRX for under $8k.

@snowjammma 3 жыл бұрын

my clutch is shot to shit on my 2013 wrx, I got a shop quoting me $1899 for this job, included HD act clutch kit and threw in the cylinder 4 cooling mod, and all new fluids. already paid for the parts ($1000) just saving for the labor. i just would rather prefer doing it myself I just dont have a lift 😭😭, have done similarly challenging jobs, ie: new steering rack/pinion, exhaust, intake, plugs and coil packs. I really wish I had at least a garage in rhode island.

@james94582 3 жыл бұрын

Also... With the ACT HDSS clutch... Did you do the full kit with pressure plate and flywheel, or run an OEM flywheel??

@BaderBuiltRacing 3 жыл бұрын

Always oem flywheel for best drivability

@james94582 3 жыл бұрын

@@BaderBuiltRacing awesome, thanks... That is the setup I was thinking about going with after some research...

@MrOmgSkittlez 3 жыл бұрын

Did he not replace the flywheel

@phildavenport4150 8 ай бұрын

Out in the snow??

@4Rracing Ай бұрын

Yo ,you skipped talking about transmission bolt to engine removal, are they reachable without tilting the engine? You spent more time on snow than the issues on removal. But nice detail on starter removal.

@anaphrodisiacxyu Ай бұрын

you're going to need to tilt the engine before removal. it won't be possible without tilting. you can connect a ratcheting strap between the engine hanger and the pitch stop to adjust engine angle

@anaphrodisiacxyu Ай бұрын

the bolts are reachable from above and below. there are two bolts and two studs underneath. above there are four bolts.

@stihks 3 жыл бұрын

Hey Bader! I have this rattling noise on my 16K miles 2015 STI. Recently I did the clutch (ACT Xtreme Duty 6-Puck Disc Clutch Kit), change fluids from all differentials and transmission and a Kartboy Short Shifter. Check the sound: check: kzfaq.info/get/bejne/o5lymMeU0tPXh4k.html. What could it be?