How to re plaster old stone Part1 kzfaq.info/get/bejne/rbqeqtmEzrO3j2g.html

Perfect just what I was looking for, notoriously KZfaq throws up all kinds of vids ( all good) but thus has helped me loads . Cheers buddy 😊

Another great video, Mac :-) All the best, Jenny ♫

Thank you for the very good video.

Very professional, nice to see.

Excellent video. Keep up the amazing work. (:

Once again after being a while...that plasterers "hole"...lol... bless you mate...you make me laugh!

Excellent video!

hi hun its Sandy.thanks for the message.i enjoy looking at your videos.might take up plastering my self 😉😄💋

Nice work lad 🤙

Great work

Thanks for showing us :)

Good stuff mate, many thanks for the great instruction

that looked like what i've been doing. I saw an old timer showing his stuff recently. Looked like Ken Dodd. He mixed two bags, then 'screeded' the sides, top and bottom, ie troweled some plaster about 6 inches into the wall, ranged them by eye with a 6ft straight edge so they were roughly level with each other. Then he walloped his two bags onto the wall in rapid time, used the big straight edge to level it all towards his screeded corners and had the whole two bags on the wall, leveled, troweled and flattened in about 20 minutes !!!.

Always a problem is fine dust , great job on the walls , always looks so easy when you do the job Mac , liked, have a terrific week :) ms

nice prep work :-) time well spent for sure :-D

What you all think ?? Refina's new petrol drill kzfaq.info/get/bejne/eqh9pLaSranFYIk.html #mixer #render #cordless #drill

same way i was thought with the floating up like number 8s on its side.good job bud

cool video keep it up

Very nice video! Happy new week ♥

Nice vid pal. Watched a few of yours, your a good spread you've got a good way of putting it across too. Nice 1

that's some crack up your back big man lol

Love a bit of sand a cement! ;)

Cracking video, nice finish. Get yourself a proper roller, that looked like a baby's sock on a poll 😄

good video bro

All that dust. I was choking just watching you. I almost sprayed the monitor with the garden hose! ;o))

nice plaster

Great instruction there, thanks for the videos. Question: if plastering outside, what ratio would you mix first coat and second coat and when would you scud a block wall first? Tks

watchya mate, really enjoy your videos 👍 what was that you were spreading on the wall please? what was the mix etc? keep up the good work mate

Really enjoyed your vid just got some questions to help me when I do it please! When you apply the PVA would you let it dry or apply the render straight onto the wall?? What would you do if the block wall is cold or wet?

Hi Buddy. Do you ever put lime with your sand & cement mix to make it easier to work with? Also, did the customer request sand & cement or were you simply replacing like for like? Would you consider using Bonding as an alternative? Sorry for so many Q's. ATB mate

I've plastered with sand and cement my bathrooms for tiling, however I've noticed the walls are very cold. Can I dab and dot the insulated tiler backer board to it?

Good job mate , looks like there is a chunk of dried cement on your float there brother , making scratchys

Hi mate, I'm about to do do some tiling outside my house. I've been reading that rendering the brickwork a week before tiling is the best way to go about getting the tiles to stick rather than just use adhesive straight onto the brickwork? Any advice would be appreciated 🙏 👍

Great video It would be helpful if you could mention and or show the products you use, I am assuming this is a bathroom sorry could not understand your accent. Thank you for your effort

Mac have you ever plastered over tiles, blue grit, bonding then skim?

Informative video. Is it better to tile directly over a cement blocks wall or a cement plastered wall? My cement blocks wall is not perfectly flat. I m thinking to first plaster and then tile...

Sorry, one more question buddy. Would you bother skimming over before tiling or just leave as is? Cheers

i done a job a few years ago for dis builder who thought he didnt need a plasterer for the prep work.it was a timber frame house concrete slabbed over it.the builder was to mean to get a proper plasterer in to do the job.he sure regretted it.1st he never over lapped the sheets of metal mesh.he then scrathed coated it.there was fuck all dept to his scratch over its light coat then left it dry 2 much before scrathing it.he got me in then to help him with the finish coat.i was none the wiser but after a day or 2 the muck cracked where he never overlapped the metel joints.it was basically hanging on the wall.i then hand to chip it back off with a cango.pollybond the fuck out of it.mixed skudding up with pva in it and start again.scratched it myself then rubbed it up after a day or 2.so by the builder dat thought he knew it all it had to be done twice.simple mistake not overlapping but costly.i didnt mind i was on day rate lol

Do you put plasticisers in that mix?

thanks for this! I couldn't hear the sound as am watching it in a public place. how soon is it before you can tile over it please?

Hi pal. I was under the impression sand and cement always has to have a scratch coat 1st. Is that right? Looked like you did it in one hit to me?? Cheers pal

Not many people float walls these day and I believe if you can't float you're not a plasterer,I was taught to make screeds 1st then fill in the rest

How do you find the speed skim when using on backing plasters/renders? Does it work as well as you would hope?

Could you tell us the ratio of sand/cement you are using for the render, plz?!

Curious as to what weight of tiles this could support

Q: How much wre the wall off level after finishing?

I got a simple question. I got old render wall and i want to stick some tiles on. But all render wall is painted so I'd like to put cement sheet on the wall rather than re-rendern or patch up. Question is Is this okay to put cement sheet on the wall for tiling?

What's the product brand u use in this video or u use currently got this job ? Internal wall same as u have here

Can I use sbr instead of PVA?

Lol @ the censor

Lovely job. Made it look easy.......and it ain't!

Do you always pva when you sand & cement render ?

I've got coal Ash mortar brick walls what would u recommend to render them or dot an dab them and if render then what mix of render?

How long do you wait until you float it?

Hi Max,, just catching up on some of the older videos,, what was the strength on the render mix ? Is there like added for internal walls and how where you scratching the render ? Have you tacks on float , great videos 👍👍

What was your mix ratio?

Hi matey. Can you this method on a stone wall??? Can you use plastering sand instead of building sand??

Think bigger roller might help

Was it you that was using catlite finish plaster.

by the way.nice boxers 😄😉

Wouldn’t it be better to use an Acrylic Primer rather than a PVA? As PVA can re-emulsify if exposed to moisture.

What is the sand to cement mix used?

I can’t understand anything what is this first thing he put on

what's the gap at the top for 😃

well sealed mask XD

I died from all the dust! Use a vacuum cleaner!

Yes but how do you achieve level and make sure everything is in the same plane cause this is important for tiling ??? There is actually a technique for doing so using directors or so called beacons. Other wise your wall will be like "propeller"

Cant understand a word with all that music playng 😢

Is this is bathroom m8 ?

Pull up your jocks

What language is he using!?

You need a bigger/better face mask. Your lungs will pay the price in the years ahead if you don't.

why not dampen it down and give it a good scud coat then lay on the scratch coat. pva is becoming used far too much for this type of work as a quick way out.. it was never ment for this type of work.. a scud coat would give a far better grip for the scratch coat... I watch alot of your videos and they are very good . I'm on the tools 26 years so I know a thing or two. but the love of pva nowadays is gone way overboard

Accent too strong to understand

Go and get some practice mate

Hey mumble chops hmurph ma mur ma murph ma murph

Nah wtf is that job