A good honest video which makes a refreshing change from those videos showing miraculous like new results. This video is honest and shows a honest true result. This method with a razor blade seems unbelievable as you think a metal razor blade will damage the paint. But this guy states clearly to use the slightest of pressure. Just one hint for you bud. A slightly better result could have been obtained by using a thicker paint, a thinner brush and doing shorter sections. This reduces massively the amount of excess paint. Yes it takes longer but the results make it worth it. Very good video m8. Well done 👍

Finally, a process I can get me head around. I thought you were going to use the blade to shave down the high spot but when I saw it used as a spreader of the paint I loved it.

Impressive and the best scratch repair video I’ve ever watched. Congrats

I think we need a new category of 'DIY' when the person doing the DIY is a highly skilled professional.

Fantastic process. I've always struggled with scratches. I seen a video where they used the blade to shave the high spots but your method is much better.. Thank you for the insight 🙂

I’m so glad I found this page. Keep it up!

Bruh you are badass, any customer would love that outcome. My hats off to you sir keep it coming

This is what I call a miracle, wow… great work 😎

Seen two videos now. You are a genius! Liked and subscribed with the full bell icon 😘

Thank you for sharing this tecnique I will try it for sure!!!

Thank's a lot brother......simple and clear. Congrats🙏

Will work on a car base coat clear coat. Thanks amazing finish.

Nice work, nice video. I have used a similar process with more than satisfactory results. Always best to keep as much of the original paint as possible in my opinion. No one likes a resprayed panel.

Really amazing work. The remaing small mark could be where the paint applied into the scratch carried on shrinking back a little?

This is awesome love ya work 👌 I will definitely be trying it myself 👍

Svaka cast brate ! Ovdje u Americi Mnogo njih nebi mogli Ovo uradit!

that was pretty awesome mate! 👍👍✌✌thank you for that!

Sick…. Really nice work 💎💪🏼

You made that look way too easy! 👏

Wonderful! If the only paint I have access to is Pearl white 070 touch up (in a pen from toyota) Could I use that? With or without hardener? I Have some long scratches on the ground effects.

Very impressed 👌🏼 what pad and compound are you using to finish please

Good work brighter 100% 👍💪

정말 굿 신의손입니다 사용 하는 분무기의 액체는 물인가요?

I've tried this method on a metallic car, it seems like it's not meant for it. The result was not same as solid color. Anyway, thank you for sharing this knowledge. It does help me to get rid of scratches on my solid paint car. 😊 Always wait for your new videos.

New subscriber to your amazing channel ,, your follower from Baghdad - Iraq

Druže Alene sve pohvale za tvoj rad, a posebno za ove snimke u kojima objašnjavaš sam postupak. Gledajući ovaj video odlučio sam opet pokušati popraviti baš duboke ogrebotine na vratima pa me zanima koji pristup koristiti. U pitanju je siva metalik boja i nisam siguran da li koristiti samo bazu po kodu ili dodati i lak, ili možda akrilnu bazu? U drugom videu sivu metalik boju radiš samo sa bazom i herterom pa me malo zbunjuje. Prije sam probao sa bazom i herterom popuniti rupe ali nije baš išlo. Koliko se suši neki deblji sloj boje kao u videu gdje si ti napravio onu duboku parnicu (kod mene je jedna upravo onakva)? Hvala unaprijed.

Thanks for uploading the video its very informative. One question I have is can you use this method with metallic paints like diamond silver for instance? Thanks

I learned today that deep scratches need to have the panel repainted for the best and most cost effective result

Great job keep doing videos like this 👍

Incredible work!! Very impressive as always.

Hello boss, what is the name of the apparatus you use to remove excess paint?

Have you ever used a PTFE (teflon) film except the razor? And one more ask. Do yoy think that hob scraper will be ok instead this fuber tool?

I appreciate this information.

I'm curious about how this will work with a metallic beige paint. I think I'm gonna retry it with this method because the clear is really thin (previously repaired from previous owner) and I already burned through by accident on a tiny spot so I'll try this as it has a lot less leveling required

Great video the recent one you put up with the vw caddy you didn't explain what tools you were using like the fubber I haven't used one before and you used masking tape in that one. other than that it's a great video. I'm guessing you could do this technique on stone chips

Great video, great technique.

After that don't forget to apply all the pressure you saved during the previous steps on the vandal's car door

As a detailer myself that is a very very good touch up, in come cases this touch up has a better outcome than actually respraying the whole door because depending on the color match and in most cases the metalic flake in metalic paint types when it's sprayed can make the whole door stand out under sunlight and at night under street lighting.

I love your videos. Did you mean to use 2500 grit before 4000 ?

Bravo, video kvalitet i komentari na engleskom su sve bolji i bolji.. I use the same method of filling it, although I have to try the razor blade method... I tend to mix a bit of acrylic clear coat together with the basecoat color. In testing I've found it gives a better results and less noticeable..

Great technique. I wonder if taping on both the sides of the deep crack, forming a very narrow visible surface and then doing this technique, will avoid the excess paint on the body and limit the work area?

Odlicno!💪💪💪💪💪😉

Love it, get rid of the music. LOL

Thanks, I like the idea with a razor. My biggest problem in these kind of repairs is the sanding process when You not only sanding out the excess of paint but You're also sanding out the clearcoat that sits all around. You may end up getting through to the base color and then the problem gets worse.

Awesome trick...! it really is a time saver

Hey bud was the paint in the bottle already prepared for the car before you added the hardener ? Or was it the base paint without anything in it ?

Love your work 👍

Awesome video great skills

wow, impressive

long tedious process but for not repainting it's pretty good results 9/10

Great video man, I only didn't get the metal sheet part? Is it something that you can buy ? "frooger tool" ? Any help would be greatly appreciated

Great video!

Makes me wonder...what if you would redo the whole process again to fill the last hardly visible line? Would that not result in a 0 visible scratch at the end?

Sorry for all the comments 😂 I hope I can still find those razor blades here in the US,I remember my dad use them for shaving,it make sense to use those type because they are flexible.

He has the shakiest hands! I am also wondering if the 'after' shot is actually the 'before' shot... I could clearly see the paint not fill all the scratch and would have been visible even when sanded back.

Amazing 😮❤

VERY impressive!

Amazing thank you

Which polish do you think will give a more suitable and better glossy finish without hardly any holograms if applying by hand foam applicator working it for a little? It is for light-scratch removal that doesn't have any fillers and glaze? Maybe Sonax perfect finsih? Sonax 03-06? or Koch M3.02? I don't know

Great Video...How about the clear coat?

Boy that was was a good one. I dont know if i could get those results. Awesome video

Por favor: Cómo proteger los costados de mi automóvil de los golpes de puerta de vecinos del parking? Gracias BCN

There was a point where I was like this is going to look like ass, but man thats a good turn around! Way better than just running the brush or pen tool down the scratch.

Grande fratello!!

I did this on a few scratches on a black car. The result is acceptable, but far from "as new" (But of course way better than do it with a scratch repair pen). Yes, it's not noticable from 1 meter and hard to see on camera, but when you sell your car and teh buyer inspects the body panels carefully, then he will notice it. But of course you did your best to repair the scratch and that's the maximum you can do with it.

What do you think about those line painters? It seems less messy. You are a professional I thank you.

hello very good technique for me Can I use the aggressive side of the mirka mini file to do that too? Thank you so much

Can this be done on metallic paint? Ive Nightfall Grey Metallic (contains flakes). Thanks

Hello! Nice job! Do you repair rusty chips?

Like was the paint in the bottle already bought prepared to apply ?

Also what wet sand paper you using here ?

good job The appropriate method is for dark colors.. but the difficulty is with light colors

Good job sir

Nice work. How long did it take you from start to finish?

Good idea - the razor blade :)

def saving this video

Wow amazing !!

Nice work. Just one point of criticism though: In your final segment, the outside scene, the focal point of your video is set pretty much to infinite (the trees reflecting on the car's panel are in focus), making it harder to judge the result of your work. Auto focus will usually do this, because the trees (or any other objects reflecting on the car's panel) are pretty much the only discernable objects for auto focus to act on. Because it's hard to have your recording device focus on a car's panel, I use the following trick when I want to photograph or film a defect on the panel: put your finger right next to the point of interest, and then have your camera focus on your finger. Then lock your focus. Now you can film the car's panel with the correct focal point. Instead of a finger, you can also use for example a piece of cloth. Anything that the auto focus mechanism can "use" to set focus to the correct distance. (I hope this was somewhat clear, I'm no native English speaker).

Mh Looks great but i would do a second fill with Paint

Is there an alternative for the fubur tool and did you used wax at the end to make it shine again?

... would it make sense to use a tape up and down the scratch to have only a small line with the scratch? Now go on like shown, remove the tape and the scratch is filled more / higher ... go on with the sand paper ...

Could you have done a another coat of paint after the first one was watersand? To fill even more the groove.? But anyway this is the best methode I have seen.

Hi there. What type of hardener did you use? I’ve got touch up but no hardener. Came with another bottle with lacquer.

Amazing!!

Very good job 🙂

do I need only hardener if the paint is already glossy? If not then use a clearcoat mix with hardener? how much should I mix together with the paint?

Seems a lot more difficult than it appears. Takes a lot of skill and experience. And what do you spray on the paint when sanding, is it just water?

Great Job!!!

Good results on Black...how about silver?

Would this procedure work for these new “Tri-Coat” paints with metallic flakes?

Single sided razor blade. Holder would also make even better. And safer. Been doing this for 20 years.

great job

Good result, also not expensive.

Will this work on metallic paint as the Flake will sit differently to the old finish ?

Great work! Just have a question, what is or where can I find the "fubur tool" Thank you

Hello sir my name Amine from Morocco my job is repairer bodywork so please can you show me this process to color white ?

What if the paint is water based?

What was the last thing u did to the car...polish??? Compond???

at last well done

How do find the exact color of paint