How To Repair Windows 10 Using Command Prompt

How To Repair Windows 10 Using Command Prompt - Startup Issue Fixed

Рет қаралды 48,571

3 жыл бұрын

How To Repair Windows 10 Using Command Prompt
In this video we'll take a look at fix startup issues in Windows 10 using command prompt. There's nothing worse than finding your computer had startup issues with boot loops and ending up on the automatic repair screen but here we'll run a number of commands that will be scan and repair any files that have become corrupted.
To download a Windows 10 ISO go to the Microsoft site for this - www.microsoft.com/en-gb/softw...
Repair a Windows Image - docs.microsoft.com/en-us/wind...
Fix Windows Update errors by using the DISM or System Update Readiness tool - docs.microsoft.com/en-us/trou...
Use the System File Checker tool to repair missing or corrupted system files - support.microsoft.com/en-ie/h...
Be sure to check other videos from TechBern - bit.ly/2LrvldJ
How to Fix Automatic Repair Loop and Startup Repair in Windows 10 - 5 WAYS - • How to Fix Automatic R...
Forgotten Password - Reset Windows 10 Password via command prompt for Windows 10 2004 - • Forgotten Password - R...
Windows 10 Standby Memory and Gaming Memory 100% FIX - • Windows 10 Standby Mem...
Find all Wifi passwords in 1 minute in Windows 10 - Wifi Password Hack - • Find all Wifi password...
How To Fix 100% Disk Usage in Windows 10 - 5 WAYS TO FIX - • How To Fix 100% Disk U...
How to Create a System Restore Point in Windows 10 - • How to Create a System...
How To Clean C Drive in Windows 10 - 7 WAYS TO SPEED UP YOUR PC AND RECOVER SPACE - • How To Clean C Drive i...
How to Fix Automatic Repair Loop and Startup Repair in Windows 10 - 5 WAYS - • How to Fix Automatic R...
Upgrade Windows 7 to Windows 10 for FREE - • How to Upgrade from Wi...
Be sure to Subscribe for More - bit.ly/2LrvldJ
This video will help to fix windows 10 automatic repair loop, automatic repair loop fix Windows 10, how to fix automatic repair in windows 10, automatic repair couldn't repair your pc and preparing automatic repair.

Пікірлер: 112

@blouyy 2 жыл бұрын

Legend!!! Thanks so much bro, worked like a charm 👌🏻

@b.bailey8244 3 жыл бұрын

this is an EXCELLENT teaching video, both visually and your voice instructions. ALso you went slow and really showed us what you did. A million thanks!

@kurtkuehnast9226 Жыл бұрын

Op⁰00

@kriss9701 3 жыл бұрын

Nothing has worked for me ive tried every single method i cant even boot in safemode and i dont have the regback files

@Frethzel 3 жыл бұрын

same i cant even into safemode :(

@ironpulse3327 3 жыл бұрын

Same here! I hope he knows how to fix this 😭😭

@techbern9775 3 жыл бұрын

Try one of my other videos to help you get into safe mode - kzfaq.info/get/bejne/iLtka6p9v72qf40.html

@atifrehan6740 3 жыл бұрын

Same here.. I can't even boot in safe mode

@lollosmino_6486 3 жыл бұрын

@@techbern9775 this is so useless because we CANNOT BOOT in safe mode. We want a solution to boot in safe mode not how to get in safe mode

@tusharharsan7768 3 жыл бұрын

Very nice bro your hard work is much appreciated 🎉🎉👍

@infernousplayz2692 2 жыл бұрын

When I try to go into safe mode by clicking restart it tries to automatic repair again and wont let me get into safe mode

@AydinSanford 2 жыл бұрын

My PC never turned back on

@gurjaapsingh9658 2 жыл бұрын

@@AydinSanford you get any solutions

@AydinSanford 2 жыл бұрын

@@gurjaapsingh9658 go into bios hit f5 when you're there it resets the bios settings then you need to redownload windows 10

@zombbae 2 жыл бұрын

Yes me too I’m so annoyed

@PrinceStation 2 жыл бұрын

Sometimes you can get around it by attempting a restore point and it might fail but after the fail attempt, when you restart your PC, it will boot you right into windows. Had this issue when I encountered a blue screen of death and that was my only choice out that's why its good to create a restore point after every major update

@21stEuphoria 7 ай бұрын

Worked like a charm!! (Tip: if you need to start CMD with admin privileges, but don't have a task bar like I did, then you can use Windows key+ R, type CMD, press enter, then find the process in Taskmanager (Ctrl+alt+del) then open the file location for cmd, and right-click then run it as admin from the Windows file explorer.)

@royaltytk Ай бұрын

Thank you 🙏 this helped me

@guna.s1673 3 жыл бұрын

You are great given every links 👍❤️❤️❤️

@yes.452 3 жыл бұрын

When I try to use f4 to get into safe mode my computer says preparing automatic repair and then says diagnosing pc then goes to blue screen that says automatic repair didn’t work properly and I’m in the same loop if I try to continue or do anything like that

@abdulsalehgaming9294 3 жыл бұрын

Have you found a solution bro I just got my pc a month ago and this happened im not sure how

@yes.452 3 жыл бұрын

@@abdulsalehgaming9294 bro I’m rly sorry what happened is that we looked into the hardware and the hard five was damaged so u can replace it or buy a new pc like I did SRY BRO PLS FORGIVE

@abdulsalehgaming9294 3 жыл бұрын

@@yes.452 its fine thanks bro

@jaketravor5147 2 жыл бұрын

@@yes.452 what?? My hard drive is damaged???

@yes.452 2 жыл бұрын

@@jaketravor5147 yes check your hard drive by opening the actual pc Check if anything is wrong on outside if you can’t see anything Maybe ask someone that knows a bit more or technician smth like that Most times you will have to get a new hard drive

@theschannel5949 3 жыл бұрын

1:55 it is giving me the same thing where I was. "Your Device ran into a problem and needs to restart. We'll restart it for You"

@rivieracar1992 3 жыл бұрын

Me too. Over and over back to the same screen.

@Tama-sw8tn 2 жыл бұрын

Me too

@Martin-ot7xj 3 жыл бұрын

hi there , it was very useful and informative tutorial video .keep it up .thnx

@techbern9775 3 жыл бұрын

Glad it was helpful!

@ladoubleo 3 жыл бұрын

When I ran the sfc command is said there is a system repair pending which requires reboot to an complete restart the windows and run sfc again

@minidee4726 2 жыл бұрын

Great video, thanks. i followed it word for word, however not sure why on my last reboot it forced me to setup windows all over again!

@justaguy5726 3 жыл бұрын

BRO, it didn't work. I'm still stuck on automatic repairing i have also tried cmd safe mode

@nabeelalkaff6730 2 жыл бұрын

when I write dir I get the message : volume in drive c has no label. It prevents me from following next steps. Is there anything I could do to continue?

@F3arCole 2 жыл бұрын

That means you should use D: because that is ur hard drive same with me

@jaketravor5147 2 жыл бұрын

Not getting past using any of the feature, still lands me on the automatic repair screen. Somebody help

@mengleang 3 жыл бұрын

I can’t get into safe mode. It’s stuck at window screen. Nothing loading. Can you help me ?

@lunaelumen6089 3 жыл бұрын

Same

@Jaydenisa_dork Жыл бұрын

I have been trying to fix this problem forever, ive even tried resetting my pc but it says “undoing changes” then goes back to the automatic recovery screen

@ericeldimarucot5748 Жыл бұрын

have you already fixed yours?

@xoxolemons6355 3 жыл бұрын

im gonna cryyyyy ;( im on computer and everytime I click f4 or the other safe mode options it kinda restarts and sends me back to the blue screen that says automatic repair ''your pc did not start correctly'' and I tried so many things I even tried the system restore but I don't know if its going anywhere does it take hours for it to finish? please see this and helpme!

@techbern9775 3 жыл бұрын

Try one of my other videos here, hopefully this will help - kzfaq.info/get/bejne/qtWdZtOW3r-qaI0.html

@b.bailey8244 3 жыл бұрын

@Xoxo Lemons - had blue screen and tried EVERYTHING and i do mean everything. wouldn't boot. even when i used command prompt i got "no operating system" and stuff like that but i knew my disk was OK. this lady told me to turn off or restart and toggle F8 - it took about two minutes of fast toggling that key and it booted up! has been sort of OK ever since but today it crashed again. pay attention to your stopcode errors and any numbers of error codes, then look them up. Mine was a 3F0 error (no boot device).

@reagle9315 2 жыл бұрын

@@techbern9775 send the link again sir. I'm having trouble clicking it

@kicking 3 жыл бұрын

i want to thank god i found this video all i had to do was remove a software i installed since i used a racer audio driver for my headset and i made it so that i basically replaced microsoft driver for razer with the update through computer worst decision ever but went into safe mode uninstalled it and restarted it was back to normal if you don’t know what you doing don’t do it XD but i hope this can help someone if they install or done something with a application uninstalling it can fix it

@mando.16 3 жыл бұрын

May you please explain more In depth about your situation that you had? I believe I may be in the situation you were.

@kicking 3 жыл бұрын

@@mando.16 sorry for the late reply but i basically replaced microsoft’s audio driver to razers driver that you get with one of their headsets pretty stupid but i did that then when i went to restart of a update it was just looped onto the blue repair screen thing and when i went into safe mode and simply uninstalled the driver through device manager and simply shut down and it just worked like notning

@hurtiin6855 3 жыл бұрын

I accidentally deleted drivers, is there a fix I can do?

@catinsured 3 жыл бұрын

How did you accidentally delete your drifers

@medievally7202 2 жыл бұрын

safemode didn’t work for me and none of the options worked for me from the last video

@Mersal-uj5nh 3 жыл бұрын

dism /online does work, it throws error 50

@lawyinghui7899 3 жыл бұрын

what if cannot enter safe mode after pressing F4 ? Please help

@techbern9775 3 жыл бұрын

Try this - How To Boot Windows 10 into Safe Mode - kzfaq.info/get/bejne/iLtka6p9v72qf40.html

@timothy2055 3 жыл бұрын

I don't have that options to boot in safe mode

@rxcro 2 жыл бұрын

I went into safe mode and its on a black screen with a cursor again

@serwellophilipcortes3741 3 жыл бұрын

I dont have start up setting. Help meee

@blaze-pf5pn 2 жыл бұрын

I put safemode and it didnt work

@dave2co1d 2 жыл бұрын

Mine says it does not support

@crapotato9099 3 жыл бұрын

I think this work. Tho my problem is that i cant seem to open safe mode

@techbern9775 3 жыл бұрын

Try this - How To Boot Windows 10 into Safe Mode - kzfaq.info/get/bejne/iLtka6p9v72qf40.html

@joelpound5010 3 жыл бұрын

My computer didn’t open when i clicked the safe mode option, it just said error once again

@michaeldjojopranoto5263 3 жыл бұрын

Yeah same here mate...not sure to find a way around this...

@Zenoboii 3 жыл бұрын

Same

@garry8642 3 жыл бұрын

Same

@jenniferpegollo2320 3 жыл бұрын

Samedt

@kermitleninja7310 3 жыл бұрын

I don't have startup settings

@gatorkenotron7155 3 жыл бұрын

In safe mode stuck on black screen please help

@techbern9775 3 жыл бұрын

See if one of my other videos helps - kzfaq.info/get/bejne/qtWdZtOW3r-qaI0.html

@sdrproductions6906 3 жыл бұрын

Every step I have error 1392..."the file or directory is corrupted and unreadable."

@techbern9775 3 жыл бұрын

That doesn't sound good. If you're getting an error like this you could try using a tool like "Lazesoft Recovery Suite" which will help you recover your data just to be sure you have a copy of it.

@hardhik8937 3 жыл бұрын

Is dis error caused coz of malicious files or cracked games 🤔....as I have plenty of them in my pc

@YDD775 3 жыл бұрын

It can be anything I didnt downlaode sketchu things on my pc and still got it

@techbern9775 3 жыл бұрын

Hard to say if this would have caused this error but I wouldn't recommend having cracked games on your computer. Certainly more likely to have errors on your computer plus the fact this can compromise your computer.

@hardhik8937 3 жыл бұрын

@@techbern9775 Kay noted 👍

@fashiontrends9456 3 жыл бұрын

Mine won't open in safe mode am so frustrated

@Rose-ue2zj 3 жыл бұрын

I can't even get in safe mode

@ameeerrr6599 Жыл бұрын

I am using acer and wen i accidentally pressed continue to win 10 it keep coming to auto repair everyday i tried it and still stuck with it can you help me

@ericeldimarucot5748 Жыл бұрын

hi, have you fixed it already?

@Arrasola 3 жыл бұрын

Tried to reinstall windows on another drive and fucked something and got stuck in an infinite loop of failing to start PC. This helped me so I could get my HW done lmao

@Off-dy4em 3 жыл бұрын

I tried everything here also and got nothing ugh I’m so depressed

@techbern9775 3 жыл бұрын

When in safe mode are you able to check in event viewer (Application & Security) logs to see any errors which might show what could be causing the issue?

@maniacfc384 2 жыл бұрын

I need help it didnt work

@ladoubleo 3 жыл бұрын

dism does not support servicing window pe with the /online option

@F3arCole 2 жыл бұрын

Did u fix

@michaeldjojopranoto5263 3 жыл бұрын

Even the Reset this PC option did not work at all...

@techbern9775 3 жыл бұрын

Are you able to perform the PC reset by booting into the bootable USB and going to PC Reset that way? Could be likely that the local windows files are corrupted so it's unable to do the use the local files for the PC reset.

@shosii9737 5 ай бұрын

I did the last step resetting my pc but after a few minutes I got the same blue screen 😢

@lpschannel3177 2 жыл бұрын

I cant enter safe mode

@lollosmino_6486 3 жыл бұрын

If my computer can't even boot with safe mode, what the f is the problem?

@emmanuelmulaudzi9765 3 жыл бұрын

Same problem here bro this is stressful

@lollosmino_6486 3 жыл бұрын

I think my problem is an update so I am trying to uninstall the latest useless update but OF COURSE errors exist

@emmanuelmulaudzi9765 3 жыл бұрын

@@lollosmino_6486 I uninstalled my latest update didn't work

@lollosmino_6486 3 жыл бұрын

@@emmanuelmulaudzi9765 I could not :/ It's time to search more youtube videos on the error

@emmanuelmulaudzi9765 3 жыл бұрын

@@lollosmino_6486 I gave up lol

@omgbraden7057 3 жыл бұрын

Bro nothing works on mine and my c: is damaged and unreadable it says idk what todo

@techbern9775 3 жыл бұрын

Try one of my other videos (How To Repair Windows 10 Using Command Prompt) - kzfaq.info/get/bejne/qtWdZtOW3r-qaI0.html - Other details/tutorials in my pinned comment.