How to Replace a CV Boot | Landcruiser 200

Рет қаралды 1,801

2 ай бұрын

In this video I replace both the inner and the outer front axle CV (constant velocity) boots in my 200 Series Toyota Landcruiser. I have 240,000km on my Toyota Landcruiser 200 series and the boot ripped on the passenger side CV joint. This video will detail how to remove the CV boot from the CV shaft and replace it with a new one. This video covers both the inner boot replacement and the out boot replacement as they are different from one and other.
This video is part of my LC200 maintenance playlists. You can find over 30 videos of Landcruiser 200 related maintenance items there.
• How to Landcruiser Rou...
#jafffa
#cvboot
#landcruiser

Пікірлер: 29

@johnp8409 2 ай бұрын

Great video as always Terry, very well explained. Just a quick tip though, when installing the outer CV, put a cable tie tightly around the circlip to compress it, cut off the excess then put the CV on, the cable tie should slide along the shaft, then cut it off when CV is on. Makes it easier to slide the CV along the splines past the clip. Also you can get a cone shaped tool to stretch the new boot over the CV without having to remove the CV.

@JafffaAdventures 2 ай бұрын

That’s a great tip re the zip tie mate, thanks for sharing. I doubt those cone shaped tools will work in this instance. They are designed for flexible rubber boots that you find on cars. The genuine and good quality aftermarket boots for the cruisers are very rigid and thick rubber. You would be hard pressed to expand them by 5%, let alone the amount you need to get it over the CV. Cheers👍😎

@rahalati 2 ай бұрын

Thanks Terry, another ownsome video into my Favorite list of LC200 DIY

@JafffaAdventures 2 ай бұрын

All good mate, thanks for the kind words 👍😎

@SamueLordcrumpet 2 ай бұрын

Terry I can't thank you enough! Your how-to on the CV install gave me the confidence to try mine and whatta ya know? Zero problems since installing it myself a few months ago. I have a spare genuine CV in need of some boots so now I'll give it a go too. I really appreciate your videos, thank you very much! Best, Sam.

@JafffaAdventures 2 ай бұрын

That’s amazing feedback Sam, thank you so much for sharing. That makes the hard work putting these videos together very much worth it😎👍

@VaughanMunro-js4nr Ай бұрын

Another Great mechanical video. Thanks for showing us how to do this.

@JafffaAdventures Ай бұрын

No worries at all mate, I’m glad you found some value here👍😎

@CaravaningaroundAustralia 2 ай бұрын

Excellent video 👍 thanks for taking the time.

@JafffaAdventures 2 ай бұрын

Thanks for the feedback mate👍😎

@fishernick2447 Ай бұрын

Time to bin the TShirt Terry haha, very informative as always cheers

@JafffaAdventures Ай бұрын

Yes mate, it’s in the rag bag😉👍

@hanshonstatzky961 2 ай бұрын

Nice thanks for the tip. Another great vid

@JafffaAdventures 2 ай бұрын

Cheers Hans, thanks for dropping in👍😎

@MudducksTouringAustralia Ай бұрын

Great info Terry. Cheers Steve

@JafffaAdventures Ай бұрын

Thanks Steve. You still have your 200 or did you flick it when you got the Ram?

@smoothersbackyard 2 ай бұрын

There’s an echo in my lounge room!!! Just after I said the words “this one time, at band clamp”!!! 😂😂😅 Another great video Terry 👍

@JafffaAdventures 2 ай бұрын

What a great movie 😂😎

@JafffaAdventures 2 ай бұрын

What a great movie 😂😎

@smoothersbackyard 2 ай бұрын

@@JafffaAdventures Indeed 🤩

@LimestoneCoastCustoms 2 ай бұрын

Afternoon Mr. King 👍 Geez, only 5k old 😥

@JafffaAdventures 2 ай бұрын

I know, it’s a travesty 👍

@leeszalnowski8367 2 ай бұрын

You’re a weapon Terry, great tutorial again mate!

@JafffaAdventures 2 ай бұрын

Cheers Lee, I’m glad you found some value here. Cheers👍😎

@holgermuller2987 2 ай бұрын

Nice vid. And explanation of the job. Really only worth it when the drive shaft in good conditions and that’s your spare shaft. Did you got a stone locked in the outer housing part which cutter the rubber or ugly quality rubber boot in first place? I cleaned the grease out from the seat and opposition the boot before assembly to make sure that it does not flips out. Not a nice job on road side….. Cheers

@JafffaAdventures 2 ай бұрын

Not sure why the boot failed mate, it was a brand new genuine CV. I bit unlucky I guess. Cheers👍

@phillipmulroy8879 27 күн бұрын

Terrific video Terry. Just a comment on steering Rack replacement for 2008 model. Do you have any this videos on this process. I am getting some advice as to the motor to be removed, don't think this correct, although I realise a big job Any comments appreciated.

@JafffaAdventures 26 күн бұрын

I do not have any first hand experience mate. I have heard some pull the motor, others pull the front diff. I can’t imagine the motor would be easier than the diff, but that is just the logic chip in my brain, again no first hand experience 😎👍

@phillipmulroy8879 26 күн бұрын

Cheers Terry. I hear you on the remove motor. I would assume that the motor should be lifted around 40mm to accommodate the height of the rack to gain clearance. I'd say a major job, any way you look at it. Cheers.