How To Replace A Sta-Rite Dura-Glas Pool Pump Motor

Рет қаралды 18,625

Күн бұрын

Find parts for your pump - bit.ly/3rpC4tM
Sta-Rite Dura-Glas Parts / Motors - bit.ly/34Elcqw
In this video, we explain how to replace the motor on a Sta-Rite Dura-Glas pool pump. We replace a single speed pool pump motor, but the same steps can be applied to dual speed and variable speed motor replacements.
SUBSCRIBE for FREE swimming pool care and maintenance videos
every week: bit.ly/SubscribeINYO ****
VISIT our blog for weekly swimming pool tips, tricks, and more! bit.ly/InyoBlog
SHOP at our online store! bit.ly/InyoPools
LIKE us on FACEBOOK! / inyopools
FOLLOW us on TWITTER! / inyopools
FOLLOW us on INSTAGRAM! / inyopools

Пікірлер: 21

@jnelz538 2 ай бұрын

I swapped my pool motor out because of this video! Everything works great. Thank you

@Inyopools 2 ай бұрын

Great job!

@urntwrthyZ Жыл бұрын

Thank you for taking the time to do this, excellent video.

@Butch1982 Жыл бұрын

Jeez...finally a good video. The BEST ever! Thank you so much.

@Inyopools Жыл бұрын

Glad you liked it!

@gilbertbaca3956 4 ай бұрын

With the spring loaded impeller seal it looks like you said full rubber side faces white ceramic ring, but before you put on the impeller it looks as though you reversed it so metal side faced the white ceramic ring. Am I seeing things wrong here??

@Inyopools 3 ай бұрын

Great eye! I believe this step had to be re-shot out of order, it was put in place in the wrong orientation accidentally.

@arthurfox1629 2 жыл бұрын

Great video! Thanks! One question, Is it normal for the brand new motor to give off a smell the first time running? Is it burning off something that was use to assemble the motor at the factory such as a lubricant? It's a chemical type smell not electrical.

@bigt5810 Жыл бұрын

Very informative video! Where can I purchase a seal kit for this Mod. P4E6D

@Inyopools Жыл бұрын

Hello Big T - You can find the seal kit for the P4E6D on our site. Here is a link www.inyopools.com/Products/00500005003534.htm

@electricalsmokealarmsandmo1564 2 жыл бұрын

Can you show how to make a portable filter system using this particular pump?

@boomerboomerdude5490 2 жыл бұрын

According to the parts breakdown there is a 'slinger' seal, pn: 5056-04, that goes between the motor shaft and the back plate (seals motor shaft and backplate seal shaft)? I did not see you replace or install onto the new motor...is it not needed?

@Inyopools 2 жыл бұрын

The slinger comes with the new motor and it's already on the shaft. It's pressed up against the end bell.

@BikerGeek 2 жыл бұрын

opened mine up and found that one of the screws holding the diffuser on was missing (I didn't install it). What effect would that have if reinstalled it with one screw missing?

@Inyopools 2 жыл бұрын

It shouldn't be an issue if you are only missing one. I've opened these before and it was missing 2-3. A real loose diffuser could rattle and also lower the flow of the pump.

@coachwoz Жыл бұрын

I swear after taking my def-user off my impeller has metal like brass around the front of it that has come off and don't see it on any of the replacement impellers. do you know where i can find one. thanks

@spacecoastz4026 Жыл бұрын

That "brass" ring is part of the defuser housing.

@rwmccullough 2 жыл бұрын

It looks like the big square gasket from the kit was unused. Is that correct?

@Inyopools 2 жыл бұрын

Yes, that was a gasket that goes between the strainer pot and tank body. Unless that is leaking, I usually skip that one and save the gasket.

@hothmobile100 2 жыл бұрын

Great video, but honestly, don't use these anymore, guys. I tried to keep these kind of pumps going but the replacement motors do not last as long as they used too. And with energy costs so high you really should not use single speeds anymore. I replaced my Dura Glas with a Hayward Maxflo VS500

@Inyopools 2 жыл бұрын

Thanks, for the feedback Richard. We'll piggyback on that thought. If you don't have the funds to go with a brand new VS pump, you can go with a variable speed replacement motor. The same steps in this video can be followed when upgrading to a VS motor. The only difference is that the VS motor would take a little bit of programming after it is installed.