How To Replace A Wheel Bearing. ~ 2000 Honda Civic EJ / EK / EG ~

Рет қаралды 73,935

Bo Builds

5 жыл бұрын

Complete Wheel Bearing Kit
amzn.to/2KJjtnh
Snap Ring Plier Set
amzn.to/2ZhE6uN
#GreaseMonkeyMods
#GreaseMonkeyRepairs

Пікірлер: 40

@pagani8 3 жыл бұрын

Super clear concise and exactly what I needed!

@antoniorobles3498 4 жыл бұрын

You explained yourself very well............... And for that sir, we the people thank you 🔥🔥🔥🔥🙏👍💯

@NormalGuy 3 жыл бұрын

Solid vid.

@gunarone1 4 жыл бұрын

Superb vid.

@jamzempire 5 жыл бұрын

Told you to keep the videos going! I'll be in every comment section!

@BoBuilds 5 жыл бұрын

Thanks bud!

@jrmyzero Жыл бұрын

a wheel bearing tool kit and slide hammer also makes this super easy. but you do need to make sure the hub sits all the way otherwise the rotor and caliper will not go back on properly and bind up(I made this mistake)

@2777qkh 2 жыл бұрын

Does make a growling noise before it got to this freeplay stage? I thought that usually occurs first?

@tyoung8723 Жыл бұрын

Just curious, how long did the hubs/bearings last?

@packerman1203 Жыл бұрын

Im gonna guess this works for basically every honda ever with this front suspension setup, hub on top of a bearing that has a snap ring in the knuckle tools required: whatever sockets it takes to get the knuckle off including the axle nut, ball joint puller, big hammer, and a big ass hydraulic press. I'm 3 for 4 on that one.

@marineswarm 2 жыл бұрын

have an updated link ? fir bearing

@djdeck1757 Жыл бұрын

Is there a kit that doesn’t require press

@yandel11210 3 жыл бұрын

For replacement of wheel hub and bearing,does it matter if vehicle is 5 speed or automatic,will it be a difference of wheel hub and bearing?

@danirish5616 3 жыл бұрын

No doesn't matter

@ahemhimynameis Жыл бұрын

Abs or non abs will matter though

@danher3797 4 жыл бұрын

Anything wrong with the old hub? Could you just reuse the old hub?

@LuanCristianThums 4 жыл бұрын

Yes, you can reuse hubs fine

@eddiecard 3 жыл бұрын

wheres your shop?

@OmarPerez-ln4es 2 жыл бұрын

How did it hold for 20$ my friend?

@antoniorobles3498 4 жыл бұрын

💪💪💪💪🔥🔥🔥🙏👍👍👍💯

@hoewhofuckseveryone7783 3 жыл бұрын

Where you pay $40 at??

@ricardodelgado5747 5 жыл бұрын

Videos are good but they would be great if it was a little longer lol

@BoBuilds 5 жыл бұрын

Sorry it's not long enough for you 😉

@ricardodelgado5747 5 жыл бұрын

@@BoBuilds lol... is cuz they are very informative... keep them coming not saying they bad. Especially the ones with both civics.

@BoBuilds 5 жыл бұрын

Just being stupid lol, it's awkward having the camera going in the shop. People looking at me like wtf is he doing.

@jamesclifford2830 2 жыл бұрын

Mine has been screaming lol

@JESUSD6765 4 жыл бұрын

Anyone have a video on how to remove the rear wheel hub?

@efjorel 4 жыл бұрын

It’s super easy it’s just a bolt and slides off just get the dust cap off and your drum off

@TonysTechAndCars 3 жыл бұрын

You are not meant to hit that.... press only

@Undeadek420 Жыл бұрын

Kept watching until he said he gonna use a press 🤦🏻‍♂️

@ivanmanist 4 жыл бұрын

Chinese bearing. Won’t last long. Don’t ask me how I know..

@BoBuilds 4 жыл бұрын

How do you know lol

@mebibyte9347 4 жыл бұрын

How do you know? Did you have a bad experience with one? Is there a brand that you would recommend?

@ivanmanist 4 жыл бұрын

I used Chinese bearings on my 1999 Acura Integra and only lasted six months. Go with the Japanese OEM supplier brand named “KOYO”. Roughly $75 on eBay for both bearings. The hub can be reused, but it also doesn’t hurt to replace them. Remember, your old bearings lasted 150k+ miles; do it right the first time so you won’t have to do it again. Best of luck!

@MiikeyLawless 3 жыл бұрын

@@ivanmanist He's right, not all bearing are created the same.

@Mike-nf6nf 2 жыл бұрын

@@ivanmanist Yup. My NTN bearing lasted over 150,000 on my 1998 Civic LX. KOYO is the other OEM option according to the Honda parts site I visited.