How to Replace and Fix Hyperx Cloud Stinger Cable/Cord DIY

Рет қаралды 41,413

2 жыл бұрын

How to repair, fix, change and replace kingston hyperx cloud stinger core broken, old cable. Headphone disassembly - buy replacement 3.5mm 4 pole audio wire with jack and microphone and restore Your kingston hyperx cloud stinger core headset. Just Do It Yourself (DIY) and save money. We also show how to remove hyperx cloud stinger core earpads and repair mic not working problem. Just buy on amazon or aliexpress hyperx cloud stinger cable replacement and simply fix headphones.
Left Right Channel test video: • Simple RIGHT and LEFT ...
Replacement 4 pole cable on Aliexpress:
- bit.ly/3z64wTb
Headphone stand on Aliexpress:
- bit.ly/3wvvEwh
Headphone stand on Amazon:
- US amzn.to/3ozI3h0
- UK amzn.to/3tBiQ5C
- DE amzn.to/3JG4rur
Replacement 4 pole cable on Amazon:
- US amzn.to/3oznilE
- UK amzn.to/3lItCRj
- DE amzn.to/3Q4SnXy
#hyperx #Repair #Headset
🇷🇺 Hазвание видео: Ремонт наушников (Геймерские гарнитуры) Kingston HyperX Cloud stinger core - Замена провода наушников SOCIAL
✔️ / techlv
✔️ / techscrews .
DISCLAIMER: This video description and comment section contains affiliate links, which means that if you click on one of the product links and later buy the product, I’ll receive a small commission. This NEVER affects the price you pay, and it’s an easy way to support the channel and the work that I do. This helps support the channel and allows me to continue to make videos like this.
Thank you for the support!

Пікірлер: 26

@TechscrewDIY 2 жыл бұрын

Replacement 4 pole cable on Aliexpress: - bit.ly/3z64wTb Headphone stand on Aliexpress: - bit.ly/3wvvEwh Headphone stand on Amazon: - US amzn.to/3ozI3h0 - UK amzn.to/3tBiQ5C - DE amzn.to/3JG4rur Replacement 4 pole cable on Amazon: - US amzn.to/3oznilE - UK amzn.to/3lItCRj - DE amzn.to/3Q4SnXy

@fishbarbeque8540 3 ай бұрын

Awesome video!!!!! Im going to do this to my HARX-700

@kirolosmakram881 2 жыл бұрын

how tf do you have a 211 subs dude wtf you helped me allloooooott

@TechscrewDIY 2 жыл бұрын

thanks, we have only recently started our journey :)

@ShinAkuma Жыл бұрын

Pro Tip: Put the ear pads back on AFTER putting on the heat shrink tubing or risk burning/distorting the rubber covering of the earpads.

@TechscrewDIY Жыл бұрын

good suggestion, extra security is never a bad thing. Thanks :)

@lucascejas3900 2 күн бұрын

I didn't understand the part about the white cable, what is it that is done with that part? I have the 4-polarity cable, I understood to make the bridge with the mic to ground, but what is it done with the white cable? the mic +

@winniaminpooh2357 2 жыл бұрын

Очень помогло, спасибо.

@TechscrewDIY 2 жыл бұрын

спасибо

@ktwentythree5382 2 жыл бұрын

nice video dude. Do you know how to open soundcard 7.1? old jack broke the half inside and i need to remove it.

@TechscrewDIY 2 жыл бұрын

it is probably glued and will need to be carefully pried open

@ridwanmujahid2316 Жыл бұрын

Maybe you could grab a toothpick or half sharpened pencil and super-glue it to the end of the jack to pull it out?

@SamYung0 Жыл бұрын

What version of HyperX Cloud Stinger is this? It has a mesh fabric headband and a volume wheel. Both the Cloud Stinger S and Cloud Stinger have leatherette headband and a volume slider.

@TechscrewDIY Жыл бұрын

I don't remember, but the principle of this instruction can be used for any Stinger headphones.

@theDemolisher13 2 жыл бұрын

3:24 what tool is that which you're using to bore the hole manually?

@TechscrewDIY 2 жыл бұрын

It's Reaming Knife Drill - bit.ly/3wFQeIy (aliexpress) or on Amazon: - US amzn.to/3PyabK0 - UK amzn.to/3yQp4BA - DE amzn.to/3lvh5lr

@filds1 2 жыл бұрын

I hope you reply. But is it possible to make detachable mic like on hyper x core ?

@TechscrewDIY 2 жыл бұрын

why do you need it ? hide ir just by flipping it vertically against the head Make detachable mic for stinger is too complicated, there's a mic MUTE button makes everything complicated.

@filds1 2 жыл бұрын

@@TechscrewDIY Sorry I forgot about this. But My mic died. I guess the tinny driver inside the mic is dead. Now that i think about it. I could probably just buy a mic and remove the driver and solder it on my mic.

@filds1 2 жыл бұрын

@@TechscrewDIY There is also one more solution.Where the flip is little bit above the flip, the rubber actually cracked. I could cut it there and just solder the socket on it. It would be above the mute switch rotation. I guess would still have the function for mute when i flip it vertically ? Since i wouldnt touch that mechanism. If you get what im saying. Since its just 2 wires positive and negative ? Thats what i see from the pictures. I dont have any HD pictures. But on the pcb of the headset it says mic_gnd and mic+ I just need 3.5mm female 2 pole pin jack

@gameking2447 Жыл бұрын

is it possible for the Cosmic byte gaming headphones ?

@ariyan786.99 Жыл бұрын

same bro

@gameking2447 Жыл бұрын

@@ariyan786.99 when and from where did you bought it ?

@HiepNguyen-yg7cw Жыл бұрын

I have a hyperx cloud stinger but it is a little different than this and i am confuse at the jumper part. do i jump solder the copper to it place and then jump it with the green?

@TechscrewDIY Жыл бұрын

if your replacement cable dont have 5 wires, then the jumper is needed to connect speaker ground with mic ground.

@sylvainh2o Жыл бұрын

I stretched them for 8 years now the wire is fucked up and the right earphone only works when i hold the wire lol but for like 50$ USD they 100% did their job just bought the Cloud core HyperX wireless this time at the same price of 50$ USD think it