How to Replace Blower Motor 09-14 Ford F-150

Рет қаралды 409,112

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Buy Now!
New Heater Blower Motor with Fan Cage from 1AAuto.com 1aau.to/ia/1AHCX00322
1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor. This video is applicable to the 09, 10, 11, 12, 13, 14 Ford F-150
This process should be similar on the following vehicles:
2009 Ford F150 Truck
2010 Ford F150 Truck
2011 Ford F150 Truck
2012 Ford F150 Truck
2013 Ford F150 Truck
2014 Ford F150 Truck
🔧 List of tools used:
• 7mm Socket 1aau.to/oQC/1AXAA00017
• 8mm Socket 1aau.to/oQC/1AXAA00017
• Ratchet 1aau.to/o4n/1AXAA00016
Subscribe: / @1aauto
Check out our playlist:
Ford F150 2009-2014 12th gen: • Ford F150 2009-2014 12...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/ajc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 139

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@davidtaylors4442 3 жыл бұрын

Fantastic

@michaelrogers9072 Жыл бұрын

I'm no mechanic but I was done start-to-finish in less than 20 minutes. Making sure I had the right tools ahead of time makes all the difference. Thank you!

@1AAuto Жыл бұрын

+Michael Rogers Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@shinerbockdoc Жыл бұрын

Great Video. My 2014 F150 Plati has same issue. Used all OEM parts for resistor, blower motor, Bussman 40A vinyl fuse, and relay and harness is good. Blower stuck on high. Upon removing the blower motor, there was a 1’’ cylinder piece of plastic inside the fan scroll rolling around. Stuck phone camera in there and took pics, but can not see or feel where this piece broke off. When I feel inside where the BM connnects, there is a plastic half moon shape door with 2 pivot points - this rotates about 60-90 degrees to allow airflow. The broken piece has hole/fitting with notches….I am think it is a pivot point for this fan switch speed selector actuator- . Gonna search and come back with deets on what I find.

@RBoas 2 жыл бұрын

That back screw is, no joke, the hardest part of the job.

@glennwhitt-hs7rh Жыл бұрын

You guys are the best ! Especially this lady because she's very detail oriented and thorough and fast, the absolute best ! Thank you.

@cameronforeman1043 Жыл бұрын

I think I’ve learned more from Sue than my actual instructors when I was in mechanic school!

@TrevynPlays 2 жыл бұрын

Thank you for the video. I am not mechanically inclined but was about to get it done because of this video. It was a pain to get the new one in but got it done no more blower motor sounding like a jet taking off lol. No to mention my dealership wanted to charge me $525 for parts & labor smh. I got the part for $170 saved myself $355 that is a lot of money with everything going on in our world today.

@awshelley 2 жыл бұрын

You’re fast. Took me a considerable amount of time longer than 7 mins

@dccowboy33 4 жыл бұрын

great video. Thanks for these. I was imagining a nightmare of twisting my hands into knots and this was super helpful.

@stevenvasquez5599 4 жыл бұрын

Bought the blower motor for $100 bucks followed ur directions and saved alot of $$$ ! Thanks!

@never2late454 2 жыл бұрын

Very thoughtful for this video. Doing diagnostic on a 2012 f150 and determined it was the blower. Will definitely buy from you.

@Dhi-fe5eu 3 жыл бұрын

I was thinking I may have to take it to the dealership to get it fixed. But this looked somewhat easy. Like u said, be patient. Great video like always.

@justinb.5822 2 жыл бұрын

I just successfully completed this procedure. The aftermarket part works great! She makes it look a lot more easy in the video! I really had to struggle to remove the old part and insert the new part. There is no extra room! The 8 mm ratchet wrench for the far screw was key! Nothing else fit in that space.

@1AAuto 2 жыл бұрын

+Justin B. Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@8tive4n 2 жыл бұрын

The dealership will charge you $400 just to do this. I know because I just had it done to me. Good thing I had a wrap warranty. Dealership mechanics are crooks.

@devinthomas4866 Жыл бұрын

Replaced the switch and the blower motor. Not a technical job but a tight spot to work in. I could not fit under the dash to undo the screws so had my son take care of them. Glad to have AC and heat again. Thanks for the video

@D0nkkkkkk Жыл бұрын

Just finished resistor and motor. Both work. Thank you.

@jonathanandrewcavazos7971 2 жыл бұрын

Extremely helpful. Very detailed. Thank you.

@ossiemoore941 2 жыл бұрын

this video made it easy for me to replace the blower in my 2014 Ford F150 and buying from you or saved me a ton of money. Thank you so much.

@timkarrell7109 3 жыл бұрын

This was very helpful! Thank you!

@craigschumann4367 3 жыл бұрын

Thank you gonna replace my blower this weekend. Great video 😃

@zvjezdanamartella3287 Жыл бұрын

It' s much easier if you pull back the layers of carpet and padding, Dont need to remove them. Much less struggle

@LOUDROWDSTROUD 5 жыл бұрын

Great video!! Thanks so much for the video placement and quality. Your explanations are simple and to the point, and I love how you showed that you tried different tools. Well done!! Cheers from Innisfil Ontario Canada!!

@1AAuto 5 жыл бұрын

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +LOUDROWDSTROUD

@78StinkinLincoln 4 жыл бұрын

ok I will check y'all out next time for sure. I already had purchased my part. thanks for the video

@1AAuto 4 жыл бұрын

+78 Stankin Lankin Thanks for checking us out and taking the time to comment. 1AAuto.com

@learningdeveloper1645 3 жыл бұрын

Thank you! I purchased a 2010 F150 XL two years ago. Got a great deal on it but always annoyed by a noisy blower fan. Just took it out, cleaned it (plastic wrapper was in there), and put it back. Noise is gone! If it ever goes out I know how to replace it quickly and cost effectively.

@1AAuto 3 жыл бұрын

+Learning Developer Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@boandjill 3 жыл бұрын

Awesome! Thanks much. This is the best video on YT for this. I didn't need a new part; just had some debris in the fan cage. Removed the debris, reinstalled the blower, all is good.

@stevejoyallman 2 жыл бұрын

23rd 3³³¾³e 3

@nathanharper7562 3 жыл бұрын

This is great! Couldn't find anything close to this.

@davepherrin 4 жыл бұрын

Perfect video!

@rafaelgalaviz4686 2 жыл бұрын

Awesome video! Anyone know what the carpet trim called that she removed from under the glove box first?

@kellybailey8783 3 жыл бұрын

Perfect!!! Thanks so much!!!

@tombrantley2236 10 ай бұрын

Took an hour but I dropped a socket in the body....GRRRRR! Good video. Thank you.

@cameronforeman1043 Жыл бұрын

Sue always come through when I need to learn how to do something on my ford!

@justwanderin847 11 ай бұрын

Thank you. I watch another video for this and the guy must of removed about a dozen bolts, I did not want to do that. But when he took the blower fan out it had a plastic cap thing in it that he said was probably from the Recirculate door/hinge ... I watched YOUR video, and it showed a much simpler way to remove the fan. THANKS, oh and mine had the same plastic cap thing in it. I don't care about recirculate but NOW the noise/vibration is gone and all is well. IT was Hard getting that back bolt off and on, but patience was the key. * I used a small 8m wrench on the back screw, could only rotate about 1/4 at a time * THANKS !

@1AAuto 11 ай бұрын

+James White Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@tehtorphbegger 2 жыл бұрын

ETA for when these are back in stock on your website? Thanks for all the great videos!

@markstoltzfus9000 5 жыл бұрын

Thank you very much for posting this video! My blower was roaring and the shop couldn't fit me in before this weekend's single digit lows set in. I pulled the blower and found what looks like some sort of broken spacer/fastener in the squirrel cage. Put the blower back in and everything works just fine. I'm curious about what that loose piece is, though. Anyway, instead of $250 for parts and labor to replace my blower, I spent just $12 for an 8mm ratchet wrench.

@1AAuto 5 жыл бұрын

You're welcome! Thank you for the feedback. +Mark Stoltzfus

@seanrester7287 3 жыл бұрын

That would be part of your recirculation door to your actuator

@user-he3sn1vv6n 2 жыл бұрын

Well done video!

@garykipfer3004 2 жыл бұрын

Very good instructions! Thank you. Chiltons should call you, because they don't have a clue!!!

@1AAuto 2 жыл бұрын

+Gary Kipfer Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@djthedamndrell 11 ай бұрын

I just replaced mine. Thanks for this video. I ended up going to Autozone and spending $200 for a Duralast one but HEY...IM IN HOUSTON AND ITS HOT...I NEEDED IT TODAY!! LOL

@kyleloew432 4 жыл бұрын

A lot of time the motor sounds bad but it isn't, a part on the blend door breaks and falls in the motor, more common than the motor going bad.

@ihavealsbutitdoesnthaveme9939 3 жыл бұрын

I agree. I was on the F-150 owners forum with this problem (fan making a thump with every revolution). I was quickly educated about the actuator and pieces breaking off and falling into the fan.

@LawsonRailway Жыл бұрын

im betting thats what happend to mine when i run the fan it makes a humming sound and at lower speeds it gets quieter on the humming

@brandonpennington8503 4 жыл бұрын

The short ratchet used at 2:12; I don't see a link for it. Never seen one like that before.

@jtc1233 Жыл бұрын

EXTRA TIP! Take off the fuse panel cover on the side and pull the carpet back a bit once you're ready to take it out/replace it.

@Bigfoot46555 Жыл бұрын

I need a blower motor, and I appreciate the mention at the end about your replacement ones having balanced squirrel cages. Do ALL your blower fans come balanced or only certain models? You have a LOT of blowers available but I don't see any mention of them being balanced or not, and all the pics I clicked on are generic and show none in the blades of the fan.

@JulioRodriguez-jk5cx Жыл бұрын

Thanks, you’re the best

@dannyjalen423 3 жыл бұрын

Thank you so much friend!

@1AAuto 3 жыл бұрын

+gaming with trigger Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@quintriggins6557 4 жыл бұрын

Can you see the evap coils with the blower out?

@artramirez3506 2 жыл бұрын

A1, can you provide a part number for that felt liner? I have a friend that needs that part for his truck. Thanks.

@mrf2869 2 жыл бұрын

For years I called it a hamster wheel which I think sounds better compared to the design but if you don’t learn something new your not doing it right. Great video 👍🏻

@ChocolateMilkBoy 5 ай бұрын

Great video 👍

@tattamaine2004 3 жыл бұрын

So she did another video replacing the blower motor resistor. My clamp to the connector is broken. Can I order that part?

@gennin35 3 жыл бұрын

Great video would like to offer a tip on those push clips if you do it fast and not slow it will just pop right out rather than bend the mount

@tiffanyyant4678 2 жыл бұрын

Can you get replacement ones anywhere u know of?

@ruderocky1431 2 жыл бұрын

My 2011 150 works on 2/3 then shuts off after several seconds.. tried the resistor but still does the same.. 1 doesn’t work.. 4 works for about 10 seconds.. ac air smells weird

@garrygiordano4059 Жыл бұрын

Put new front blower motor in 2011 Expedition. Cut 1 x 2 4 and 1/4 inches long and jammed it under motor to support it, both during removal and new install, made it much easier. Also to remove and install, I rotated motor about 180 degrees so vent tube faced towards front of car, to easily get it up into opening, and then turned it back into proper alignment. Put wood support under it and fastened bolts.

@garrygiordano4059 Жыл бұрын

Put new front blower motor in 2011 Expedition. Cut a 1 x 2 4 inches long and jammed it under motor to support it, both during removal and new install, made it much easier. Also to remove and install motor I rotated motor about 180 degrees to get it up into opening and then turned into proper alignment.

@StrappedUpShawty Жыл бұрын

Is there a way to tell which part is bad? Either the motor itself or just the resistor? Not sure on which to order from y’all’s website

@luisarmando92 2 жыл бұрын

i nee o know if my f150 xlt 2012 uses or not a cabin filter cause is not under the compartment someone helpme please

@shaneking5907 2 жыл бұрын

Can a leaky quick connect cause air not to blow?

@vitali7167 4 жыл бұрын

My blower motor won’t go in no matter how much force I put in. Have any suggestions?

@ThsMachnKllsFascists 2 жыл бұрын

Thank you!!!

@TherealDsizzle Жыл бұрын

Do you have to take that felt off to get it out ?

@FanceeName 4 жыл бұрын

Omg....I just replaced mine! Such an awkward position to work on. FYI anyone if you pull back the carpet and thermal pad the fan goes up in there easier.

@1AAuto 4 жыл бұрын

+Fancy Name Thanks for the tip!

@3613jeremy 3 жыл бұрын

Make sure you buy this fan online every part store wanted $150+ vs $40-$120 online the $120 was a OEM motorcraft

@cspears101 5 жыл бұрын

When installing, was there any worry about pressing too hard and breaking the cage?

@1AAuto 5 жыл бұрын

Thanks for checking us out! As this part is plastic there will always be the chance of damaging it if too much pressure is applied. We would advise just to be careful when installing. Hope this helps you out! +cspears101

@compton221 3 жыл бұрын

Perfect. I was able to fix it in 30 minutes

@1AAuto 3 жыл бұрын

+Donnie James Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@Moonboy83 3 ай бұрын

Is this the same for the 2014 Ford Expedition, my AC just died out today. 😊

@SevenSixTwo2012 2 жыл бұрын

Excellent video. Be careful when removing the three 8mm bolts though, and go reverse and forward a few times on your ratchet if they don't want to come out (they get caught in the plastic somehow). I broke the 8mm bolt closest to the fuse box on mine by using an electric ratchet on it at first, trying to get it out in one swing. Now the new blower motor is held in place by 2 screws only, as there isn't room to drill out the broken off / stuck bolt. What a crappy design!

@goodolef1009 2 жыл бұрын

that’s ford for ya lmao

@ArchGBUStanton 2 жыл бұрын

How did you know the blower motor was bad? Mine would intermittently stop blowing but would then come back on a few minutes later and not nothing. This is my guess.

@DBradford501 2 жыл бұрын

Okay

@shannontuttle5754 4 жыл бұрын

Does this part work for a dual climate 2010 f150 platinum?

@1AAuto 4 жыл бұрын

+Shannon Tuttle Thanks for checking us out! Yes, the product in this video is listed to be a direct fit for the 2010 Ford F150. Please let us know if you have any further questions, thank you!

@kevg7744 3 жыл бұрын

Thank you! Repair fixed! Pain in the butt whoever designed that setup thankfully it was only 3 screws!

@Dave-tw9ib 5 жыл бұрын

I just replaced the blower resister the fan will only work on high same thing ?? Could it be in the windings of the motor ?? Only 1 speed I hate to yank it for nothing u gave no symptons of the motor. Did it completely stop working/ ?? Is there a speed set up in side ??

@1AAuto 5 жыл бұрын

Try checking the blower motor! +Dave Wilson

@johnferrante6462 Жыл бұрын

I have a 2013 FX4 with the dual climate. I get an intermittent squeaking noise from it, and it goes away when I shut the system off. It does not get worse as fan speed increases. Ya'll think this is the blower motor or something else? Swapping it out seems really easy.

@mikloowl4899 4 жыл бұрын

It's winter here and I had my heat on at the second setting. It stopped working while I was driving and now can only get it to push air at the fourth level setting, would this be a blower fan or something else?

@michaeltrongone5768 4 жыл бұрын

blower motor resistor

@imrickjames98765 4 жыл бұрын

Drawing too much amps if it keeps blowing then

@mkleyn99 3 жыл бұрын

My fan would stop working in the last two high settings. I bought a new blower motor resistor first to see if that would fix the issue and it did not. Will be trying to replace the blower motor next:/ hope it fixes my issue!

@aaron2081 Жыл бұрын

Let’s go, Sue! 💪💪💪

@thehoodadventures602 Жыл бұрын

This is the same thing for a 2014 f150

@memoredwash 3 жыл бұрын

Is this what makes the hissing sound every now and then?

@stephenhairell4456 2 жыл бұрын

Clockwise or counter Clockwise wise

@ogie5194 5 жыл бұрын

So Carla from Cheers left the bah to become a mechanic? What's a cah?

@peytonwilloughby5565 10 ай бұрын

I have a 2013 F-150 with a very annoying squeak coming from that far passenger air vent. I ONLY hear it when the air is on, and only on fan speeds 1-3. I’m guessing replacing the blower motor would fix this? If the air isn’t on, I never heard a peep. Thanks!

@1AAuto 10 ай бұрын

+Peyton Willoughby We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@user-em4wr3nh3d Жыл бұрын

My replacement blower had a broken fan when it arrived. Sorry to say that A 1 Auto did not seem to help me with the return. I purchased another blower for less from a different company.

@juniorsarmiento7292 4 жыл бұрын

Does anyone know where the cabin filter is on the 09-12?

@ricco2.449 4 жыл бұрын

From what I know they don’t got one

@daveallen63 2 ай бұрын

Looks nothing like my 2013 Ford F150 XLT. There is no carpet piece for one, under the glove compartment there is just a black casing. I can't find a single video or diagram claiming to be for a 2013 that matches the duct fan layout for my truck. Everything works but it just started making a racket like the fan is hitting against something. Can anyone tell me if the black casing I am seeing is what I need to open up? I'm old but capable of doing this just can't afford to tear it down if it's not what I need to be doing.

@jerrychurch4861 5 жыл бұрын

Just replaced the blower motor controller With a brand new one and fan speeds (1-5) seem to work just fine, but, when you put it on the highest setting (6) the blower motor completely quits, could this be a problem with the blower motor pulling too much amperage. I.e. could replacing the blower motor fix this issue? 2014 F-150 Platnium

@jarretgrasse2599 5 жыл бұрын

jerry church high speed relay

@rdp2370 4 жыл бұрын

Sounds more like a resistor issue. Did you find the issue out?

@mazamike 4 жыл бұрын

@@jarretgrasse2599 Mine did the same thing, worked on all speeds except the highest setting until finally all speeds quit working, just replaced the blower motor resistor and it didn't help. Where is the high speed relay located?

@jarretgrasse2599 4 жыл бұрын

Maza Mike should be in the fuse panel under the hood

@mkleyn99 3 жыл бұрын

@@mazamike this is my issue currently. Did you solve this problem?

@colemanskipper1478 Жыл бұрын

Just replaced mine and it sounds louder than the air coming out of the vents. Like a whirling sound. Not as quiet as original part

@bobhajvert2210 Жыл бұрын

Clean the evap coil while the blower is out!!

@h2sx_riderqc 3 жыл бұрын

is it me or its litteraly the same blower in the S197 mustang ?

@jaymeztherapper2496 7 ай бұрын

Just replaced the resistor to no avail, I have no idea what I'm doing or what I'm looking at, but I hope this works🤣

@KeithStrang 2 жыл бұрын

FYI... You don't have to remove the panel as it doesn't provide any more access. I also did it with a regular socket wrench, a 45 and an extension.

@1AAuto 2 жыл бұрын

+Keith Strang Thanks for the feedback!

@kristiburr2321 3 жыл бұрын

My fan will not come on at all is this the part that needs replaced? 15 degrees out I need my windows defrosted

@1AAuto 3 жыл бұрын

+Kristi Burr Thanks for watching! It could be a dead motor, but it could be other issues like the resistor or wiring.

@johnhao3464 3 ай бұрын

Good video, I completed this project from the video, lemme just tell you Ford has the absolute worst engineers whoever decided to put it in this position, had me cursing at myself for an hour

@jodystemberger4084 Жыл бұрын

Question for anyone. Whenever I turn my heat or AC on, the whole truck starts to shake when the fan is running. Anybody know if replacing the blower will fix my issue?

@kellysaluri4681 Жыл бұрын

Mine started making an awful rattle yesterday. I watched this video, pulled blower out, found a plastic part broken (other website said it was non essential - fingers crossed), removed it from blower, put blower back in, no more noise/rattle.

@dalebertdurando1496 2 жыл бұрын

I'm guessing a stinky mouse nest is in the fan or the channel to the outside vent. Thx

@aq2803 4 жыл бұрын

what exactly does the blower motor do does it let the air come out softly or when you turn it up to four it comes out more rapidly?

@skittlesdude3553 4 жыл бұрын

It’s going out

@jakemocs5573 3 жыл бұрын

It controls your fan speeds

@mortneff438 2 ай бұрын

Thanks.

@1AAuto 2 ай бұрын

+@mortneff438 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@bendeco 4 жыл бұрын

Clink on da link!

@1AAuto 4 жыл бұрын

+Phack Em Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@kamala2111 3 жыл бұрын

Dealership wanted $445.00 to replace........Thanks

@imrickjames98765 3 жыл бұрын

That accent though....

@ryankenny7726 3 жыл бұрын

New Orleans?

@bthompson1767 3 жыл бұрын

Parts are always out of stock

@1AAuto 3 жыл бұрын

+B T We try very had to get our parts back in stock as soon as possible. Please check back again soon.

@LawsonRailway Жыл бұрын

Guys this is alot harder than the video shows i really had no way to get a tool on the back screw so i had to use a universal socket because theres no room to get to it and it turned into a 3 hour job and my advice people let a mechanic do this itll save you alotta physical pain