Buy Now!
New Crankshaft Position Sensor from 1AAuto.com 1aau.to/ic/1AECS00167
This video shows you how to install a new crankshaft position sensor on your 2011-2018 Ram 1500. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
Once the sensor is installed, you will need to use a manufacturer scan tool to perform a crankshaft position sensor relearn.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• 10mm Socket 1aau.to/obGL/1AXAA00017
• Torque Wrench 1aau.to/obba/1AXAA00044
• Gloves 1aau.to/oa5d/1AXSS00048
• Safety Glasses
• Pick 1aau.to/o3z/1AXAA00037
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/fXT/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.