How to replace CV axles Honda Accord 2010

No video

How to replace CV axles Honda Accord 2010

Рет қаралды 21,322

Күн бұрын

Hey guys here's another How To video on how to replace both your axles in your Honda Accord V6 3.5 hope you guys like the video and learned how to install your axles if you did comment down below and let me know how easy it was! Share also if your new to the channel consider subscribing also hit the notification bell 🔔 so you won't miss any up coming future videos! Thanks again CGFIX see you on my next video!
Rock Angel by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons....
Music promoted by Audio Library • Video

Пікірлер: 55

@kellypalmer4938 5 жыл бұрын

David & Carlos best mechanics around. I recommend taking your car to them!! 👍🏼👍🏼

@CGFIX 5 жыл бұрын

Kelly Palmer thank you so much! We look forward to make our customers satisfied 😁

@anthonyreyes2754 4 жыл бұрын

Kelly is cute

@JettaRedIII 4 жыл бұрын

Good job! That was the most straight forward repair I’ve seen.

@CGFIX 4 жыл бұрын

Thank you and thanks for subscribing 🤘

@gregorywilliams7703 4 жыл бұрын

Great Video. Straight to the point. Easy to follow.

@Car1Sagan Жыл бұрын

Thanks. On the passenger side I saw you remove the brake line bracket but not the ABS signal wire bracket, gotta do both. The job looks easier to do than with the prior generation Accords ending with the 2007 model. I'll be doing this soon with my 2011. Thanks again bros.

@tlosouf85 2 жыл бұрын

I would've fixed her car too 😂😂😂, but all jokes aside I needed to see this video for my daughter's car on the passenger side axle to make sure there wasn't any other special procedures that had to be done. It looks pretty straightforward

@nathanjohnson3790 2 жыл бұрын

Sweet Job Sir!! Please consider having your auto tech. personnel wear some eye protection as not to possibly cause any harm to his being. But Still, Sweet Job!!! Thanks for Sharing!!!

@stephenajones4438 2 жыл бұрын

Thank you very much for taking to help other with a how to video. Much appreciated.

@j.v.1166 4 жыл бұрын

I think I built enough knowledge to fix my Accord from of the same problem.(I think).lol.thanks for the helpful video.ill try to make sure I get the right axle on each side.

@CGFIX 4 жыл бұрын

Good luck!! Let me know how you did!

@Kabby450 3 жыл бұрын

Perfect video!! Thanks for making it simple! What were the part numbers for the axles and do you recommend where to get them online and what brand would you recommend.

@savedhms 2 жыл бұрын

Thanks guy's. My 1st ever major fix and it went pretty good!

@danielcostea2391 Жыл бұрын

Great video, since I’m about to tackle both sides. I didn’t see the numbers for torque at the end tho

@NickyD626 Жыл бұрын

I think 1A auto did a video on these with torque specs included, I think the dampener for is 40 ft lbs and the ball joint is 60ft pounds, may be the other way around and tie rod is 60ft lbs as well

@brianbecker83 3 жыл бұрын

Great video! Thanks.

@jackogez446 3 жыл бұрын

Cant get mine out of the transmission, ball joint broke off , so then broke cv axel. Pulled apart , a d cant get it out , tryed many ways , gonna raise it up a little more and beat harder , I've done many axels , never had this much of a problem

@CGFIX 3 жыл бұрын

We used a snap on pry bar some axles could be like that but with a little more beating it will come off good luck

@rhall772 2 жыл бұрын

Great vid!

@bernardbaria6757 3 жыл бұрын

Hey just seen this video, and I too am having issues with shaking on the steering wheel at high speeds, when you replaced the cv axles did it stop the shaking?

@teknoray21r 4 жыл бұрын

Nice video

@CGFIX 4 жыл бұрын

raymond rivera thank you 👍

@chemistryscuriosities 3 жыл бұрын

Ever heard of an axel just breaking? I think that is what just happened to mine. It still rolls when in park and any gear. When I took the turn it made a loud banging noise and then it sounded like thumping around on the passenger side. I can see the part that’s supposed to be on the tie side flopping around when in gear. What could have happened? This just happened like 2 hours ago

@JussHereToWatch 2 жыл бұрын

I had the same issue- it’s your circlip.

@Car1Sagan Жыл бұрын

Same thing happened to my 2011 model. I will be fixing soon.

@MISTER__OWL 3 жыл бұрын

This is great thank you. Is this the same procedure for a crosstour?

@CGFIX 3 жыл бұрын

Yea

@estebanquito2473 Жыл бұрын

"GOOD JOB " 👏👏👏👏👏👏

@CGFIX Жыл бұрын

Thanks brother

@702solidink 2 жыл бұрын

I have a 2009 Honda Accord . I also hear a clicking noise when reversing when wheel is turn. Is that a sigh of a bad cv? Thank you in advance 🤙🏼

@hunterjohnson4954 2 жыл бұрын

Does anyone have all of the oem torque specs for this procedure?

@alejandrorobles4338 3 жыл бұрын

Is it normal for oil to start dripping when you’re changing the axle?

@CGFIX 3 жыл бұрын

Yes but make sure you install quickly and not damage anything or leaked a lot check your transmission fluid dipstick make sure it’s full to the second dot on the stick warm up the car to operating temp then check fluid level

@lorenzomartinez2550 3 жыл бұрын

That takes off the vibration right ? ...I have a 2009 Honda Accord and when i push the gas it vibrates

@jonkore2024 2 жыл бұрын

Unsticking the axle from the transmission

@whoswhatidk3365 Жыл бұрын

Alignment is necessary after correct?

@Car1Sagan Жыл бұрын

I don't think so. Get a free alignment check, it wouldn't hurt.

@fredreber4691 3 жыл бұрын

How do you replace a clutch on a 2011 honda accord

@kacypettet4336 3 жыл бұрын

What about the snap ring? Does it need removed before the new is installed?

@Car1Sagan Жыл бұрын

No it doesn't

@anthonysandelli5571 3 жыл бұрын

When I try to take the axel nut off it spins with the car why??

@shawazonfire Жыл бұрын

you need to take the nut off with the wheels on the ground

@shawazonfire Жыл бұрын

loosen* then lift the car and then remove nuts

@MrSupernova111 4 жыл бұрын

How long does it take to replace each axle?

@CGFIX 4 жыл бұрын

All depends on experience

@youngsumma 4 жыл бұрын

about 35 minutes after you realize you need the Incredible Hulk to take off the axle nut

@MrSupernova111 4 жыл бұрын

@@youngsumma lol

@MrMcgriz 3 жыл бұрын

where are the torques?

@MrMcgriz 3 жыл бұрын

Where are the torques?

@1979royalknight 6 ай бұрын

Wow only one jack stand? That is not right.

@MISTER__OWL 3 жыл бұрын

Also every other video they disconnected the ball joints what a waste of time that is.

@Bbrody757 Жыл бұрын

How you got a mechanic KZfaq channel with someone else doing all the work smh

@CGFIX Жыл бұрын

It’s called team work and just because am recording an doing all the work on editing does not mean I don’t work on cars my self like I do every day but you have a good day may god bless you ❤️💪🏻

@Car1Sagan Жыл бұрын

Ur a good dude bro. You take a little abuse but return it with kindness. I wish I had more friends like you.