Рет қаралды 3,437
Buy Now!
New Door Lock Actuator from 1AAuto.com 1aau.to/id/1ADL...
This video shows you how to install new door lock actuators from TRQ on your 1998-2011 Ford Ranger. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obFq/1A...
• 11mm Socket 1aau.to/ob5w/1A...
• Trim Tool Set 1aau.to/oavY/1A...
• T27 Torx Driver
• 1/4 Inch Ratchet 1aau.to/obFj/1A...
• 3/8 Inch Drive Ratchet 1aau.to/ob5w/1A...
• Gloves 1aau.to/oa2A/1A...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.