How To Replace Driver Side CV Axle|Ford Fiesta

Рет қаралды 1,546

6 ай бұрын

We replaced the front driver side cv axle on this Ford Fiesta. Due to a grinding noise it was making. This application is similarly applicable to 2011-2019 Ford Fiesta SE and ST models. In the process... we also exhibit a couple of new tools that could have been used to remove cv axles. Along with our simple method of using ordinary tools most people would already have. We really appreciate you all for turning in. Thank you for your support!
If you're interested in seeing how we handled the passenger side. Just click the link below:
• How To Replace Passeng...
⚠️WARNING⚠️ THIS IS FOR EDUCATIONAL AND ENTERTAINMENT PURPOSES ONLY. THIS IS NOT A HOW TO OR D.I.Y. YOU MUST BE MECHANICALLY INCLINED OR HAVE KNOWLEDGE ABOUT VEHICLE. THIS CHANNEL NOR IT'S ENTITIES MENTIONED OR INVOLVED ARE NOT SUBJECT TO OR WILL NOT BE HELD ACCOUNTABLE FOR YOUR ACTIONS, MISHAPS OR MISFORTUNE. AUTOMOTIVE SYSTEMS ARE VERY SENSITIVE AND IMPORTANT TO VEHICLE SAFETY. IT SHOULD BE PERFORMED BY A QUALIFIED OR EXPERIENCED TECHNICIAN. ALWAYS EXERCISE SAFETY FIRST AND MAKE SURE TO KEEP A CLEAN WORK AREA FOR SAFETY.

Пікірлер: 6

@calebfenn482 Ай бұрын

When you were putting the new cv axle in what were you hitting it with to get it all the way in the transmission

@MahlonTane Ай бұрын

Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We were using an orange mallet from harbor freight. I believe it's either 4 or 8 lbs. Plastic coated. We hope our content helped you out a little. We really appreciate your time and support!

@AnthonyZACKIEWICZ-bq6cc 5 ай бұрын

Did you anti seize spray on the bolt

@MahlonTane 5 ай бұрын

Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. If you saw anti seize being applied, it would have been in needed areas not the threads. As said in the content; this is our process. We hope our content helped you out a little. We really appreciate your time and support!

@Good_Things_To_Know 5 ай бұрын

Did you add more transmission fluid ?

@MahlonTane 5 ай бұрын

Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We actually service the transmission fluid after finishing both cv axles. Here's the link below: kzfaq.info/get/bejne/p5yWpdOGuNyXaaM.htmlsi=CFBkvjEDEC3aVqh- We hope our content helped you out a little. We really appreciate your time and support!