How to Replace Engine Coolant Water Outlet 2008-2016 Chevrolet Cruze

No video

How to Replace Engine Coolant Water Outlet 2008-2016 Chevrolet Cruze

Рет қаралды 67,210

Күн бұрын

Buy Now!
New Thermostat Housing from 1AAuto.com 1aau.to/ia/1AEM...
This video shows you how to install an engine coolant water outlet on your 2008-2016 Chevrolet Cruze. The engine coolant water outlet connects the engine to the radiator for the circulation of coolant to maintain ideal engine operating temperature. Over time, it can wear or crack, requiring replacement.
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/ob/1AXA...
• 7mm Socket 1aau.to/oe/1AXA...
• Trim Tool Set 1aau.to/oe/1AXX...
• Hose Clamp Pliers 1aau.to/oc/1AXA...
• E10 Socket
• T20 Socket
• Ratchet 1aau.to/oe/1AXA...
• Socket Extensions 1aau.to/oe/1AXA...
• Torque Wrench 1aau.to/od/1AXA...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oc/1AXS...
• Drain Pan 1aau.to/oc/1AXA...
• Funnel 1aau.to/oc/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oc/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 44

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@official_mbeli 2 ай бұрын

I wanna be serious one time man I really appreciate you for making this video I feel even more of a man today I literally just did this water outlet replacement by myself your the truth man you helped me in life this is something we need to know as men and I appreciate you…. You’ve taught someone today and I succeeded

@TRQ 2 ай бұрын

+@official_mbeli Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts! 1aau.to/m/Shop-TRQ

@mathewweeks3045 10 ай бұрын

Seems like an easier job. Just saved me $400 that was quoted by a local shop

@scottyphillips7799 2 ай бұрын

Used your video yesterday as a step by step and it took all of 30 minutes time to replace this and had time to replace a headlight bulb as well before dark. Thanks a ton.

@ART224 11 ай бұрын

Great video. I bought an upgraded aluminum version of this part. Would you still torque to 71 inch pounds even though it’s aluminum? I can’t decide whether that would make a difference.

@PowerPlayersMagazine Жыл бұрын

I had to do one of these today. The space is so tight when replacing the hose or tightening them up.

@cheeseballs3825 3 ай бұрын

Get the hose clamp pliers! Worth it for just this job, then you have them for every hose you pull.

@tiffanyeaton5075 Жыл бұрын

Thanks so much This video helped me with my 2011 Chevy Cruze

@Marco49511 9 ай бұрын

Just did mines for the third time since I’ve had my car easy work

@josephlinares96 7 ай бұрын

Thanks just for mine because you made it look so easy

@JoeFoshoGaming 2 ай бұрын

Hey TRQ! Thanks for the video, made repairing my wife's 2011 cruze 110% easier watching your video. Only thing I'm seeing is there was a tiny bit of leaking around that last connection for the overflow that stopped once the system had pressure again, is that a cause for concern?

@quickfab88 2 ай бұрын

Don't forget to release the air with the bleed screw when filling...

@paulthompson7471 Жыл бұрын

Very good demonstration. If you don't mind, what brand are your standard and remote hose clamp pliers? They are better than what I have.

@sindikit 10 ай бұрын

Tip. Either don't remove the tip off of the overflow hose and use it again or just go ahead and buy a new hose. The tip has a plastic insert and it breaks easily. Found out the hard way.

@melt7049 7 ай бұрын

Helped me so much. Thank you!!

@cheeseballs3825 3 ай бұрын

You don't have to purge the cooling system after? I've always done it, is it just a waste of time?

@andrewmaddog6031 6 ай бұрын

do you have to drain the coolent before hand or no, just keep how it is?

@carlosolmedo93 7 ай бұрын

Does anyone know the name of the hose that he used the clamps on to remove the clamps and slide off the hose?

@imbryan1987 Жыл бұрын

Perfect! That was amazing 😮

@jdubya54 8 ай бұрын

Does this housing regulate the water flow as if there was a thermostat or is thermostat somewhere else

@KTPRODUCTIONS90 8 ай бұрын

#TRQ please read to the end! Need advice. I've replaced the same part once, maybe twice. I just ordered one today but canceling it because I ordered the gasket instead because the gasket is broke. My only thing is, the surface of the motor that you cleaned off, it doesn't look even on my mom's car. Thinking I may need to put a straight edge on it and see if it's warped or not. Also, I didn't have a torque wrench so I may have either overtightened it or maybe didn't get it tight enough. I'll find out Thursday how it goes once the gasket comes in. It's always something with the car. I'll probably take a video of it running Thursday bc it's making a sound that I can't figure out. Could be due to me jacking the motor up once to work on the belt. Need some advice on it. 2015 cruze 1.4

@MrJUANDIEGO1989 2 ай бұрын

I have a 2016 Chevy Cruze. This piece was broken and replaced it on my own watching this Vid. Before replacing it though, I was driving and had to pull over cause the check engine light came on that it was overheated. I discovered that the plastic piece itself was cracked, so I replaced it. After replacing it though, the car will not start :/ Any ideas on what the cause of this may be? The engine turns over, but won't start. Battery is good, car has gas. No idea on what it could be 😒

@steverose6326 4 ай бұрын

Did you notice the engine oil sitting in the air intake, looks like turbo is failed. Just did coolant outlet on wifes car and found good amount of oil.

@neil2550 19 күн бұрын

Just found this problem

@Dear1970 Жыл бұрын

Hello my top small diameter hose that goes to reservoir is leaking at the outlet does the whole water outlet need to be replaced will it included everything that is needed or do I still need to buy hose assembly that goes to reservoir

@michelledaniel8770 Жыл бұрын

Hey I replaced the coolant housing and I discovered the hose in the back that leads to the car like it's going into the dash is blown it need to be replaced. What's it called and how do you do it. Please help

@Bronxchild19671 Жыл бұрын

Heater hose

@elpollotote6102 Ай бұрын

Can you tell me the tools you use in this video

@TRQ Ай бұрын

+@elpollotote6102 The tools used can be found linked in the description!

@willnone9977 Жыл бұрын

Are the Dorman water outlets good? or should i stick with AC delco GM?

@user-fk4og2gt5h 2 ай бұрын

What's the name of the tool to take the clamps out

@FitnessLife247 3 ай бұрын

At 5:22 you re attached a hose what is that part called???

@alrensantoine3601 2 ай бұрын

Where’s the thermostat in all this?

@jmrandom194 Ай бұрын

6:10 shows a metal hair pin connector, but then 7:10 it's no longer there...?

@cesiar25 8 ай бұрын

Alright. SOS HELP!! I did just this, and for some reason, the car just died after 10 seconds after I replaced the oil cooler inlet hose and what could my issue be?? A connector not working? Connector not connected correctly? Please let me know cuz I am at a loss