How to Replace Front Axle 03-09 Toyota 4Runner

Рет қаралды 24,054

4 жыл бұрын

Buy Now!
New CV Axle Assembly Set from 1AAuto.com 1aau.to/ic/1AACS00064
This video shows you how to install a new TRQ front CV axle on your 03-09 Toyota 4Runner.
• Check here for more videos on the 2002-09 Toyota 4Runner: • Toyota 4Runner 2002-20...
This process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
Tools you will need:
• Flat Blade Screwdriver 1aau.to/okT/1AXAA00013
• Impact Screwdriver 1aau.to/os/1AXAA00047
• Pocket Screwdriver
• Pry Bar 1aau.to/ocN/1AXAA00020
• 17mm Wrench 1aau.to/ocX/1AXAA00010
• 12mm Socket 1aau.to/okD/1AXAA00015
• 17mm Socket 1aau.to/okD/1AXAA00015
• 19mm Socket 1aau.to/oeK/1AXAA00043
• 21mm Socket 1aau.to/oeK/1AXAA00043
• 36mm Socket 1aau.to/op/1AAST00006
• Brake Caliper Hanger 1aau.to/oN/1AXAA00084
• Side Cutters
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/ogL/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Cotter Pin
• Rust Penetrant
• 3/16 Allen Wrench 1aau.to/oi/1AXAA00006
• Hammer 1aau.to/ocT/1AXAA00091
• Ratchet Strap
• Rubber Mallet 1aau.to/oS/1AXAA00413
Subscribe: / @trq
Check out our playlist:
Toyota 4Runner 2002-2009 4th Gen: • Toyota 4Runner 2002-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 23

@TRQ 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@deibycruz8157 3 жыл бұрын

Great video thank you, you made it look to simple

@Big88Country 2 жыл бұрын

Absolutely love your guys videos, they help tremendously! I experienced wobble in the front end, thought ball joints were bad. Jacked it up, and noticed the passenger wheel would turn then stick. Thought bad caliper. Removed caliper and still had the problem. Hub would turn then stick, I mean almost like a binding. Now it's either the axle, or the transfer case. Any of you guys experienced this before? New one on me. Oh, and put new wheel bearings in last year, so I'm eliminating that, for now. It also has a 2 inch over stock coil over installed. I will be putting new upper A arms to adjust for this extended coil over. Would like to know what ya think, thanks! One more thing, it's a 2007, gen 4. Ever seen the transfer case stick on one side before?

@rjjr7064 3 жыл бұрын

*FOR FUTURE MAINTAINERS* Taking off the abs sensor is unnecessary, just be careful around it. In an attempt to very carefully remove mine it cracked due to old age. The rest of the maintenance shown is great but this step can be skipped. It cost 300$ to replace it myself.

@damonblankenship9450 2 жыл бұрын

Great job......

@wally6193 3 жыл бұрын

didn't you just do the same video for 1A auto? THis time you took the wheel bearing out, the other one you didn't?

@anthonypuente479 4 жыл бұрын

Si compro ejes CV no genuinos mi pregunta los sensores abs trabajan igual o se enciende la luz en el tablero?

@ThomasCochran127 4 жыл бұрын

Great vid. Did you refill any lost fluid when you pulled the old axle out?

@rjjr7064 3 жыл бұрын

Yes you need to put gear oil back into the front differential. OEM fluid from toyota is best but anvil makes a synthetic equivalent that is half the price. You need 1.7 qts.

@tracereed7457 4 ай бұрын

Great instructions but anyone doings this do NOT use TRQ cv axles. OEM only

@22iceage 4 жыл бұрын

Great video How much time does this job typically take?

@rjjr7064 3 жыл бұрын

2-3 hours

@kvnmelton443 Жыл бұрын

On the 1a video you torqued the axle nut to 203ft lbs...which is correct?

@Darkhare33 4 ай бұрын

Is there any difference to the job on the v8 awd models?

@GoCubs2692 4 ай бұрын

Q. Why did you take off the Cap before you put the wheel back on? You had just put it back in. 17:28

@anastasiolanda9729 2 жыл бұрын

How much is the cost on labor for this job?

@12v 3 жыл бұрын

isn't this the 1a auto guy? what's this TRQ channel about

@TRQ 3 жыл бұрын

+12v 1A Auto sells TRQ parts so we also create videos for their channel. Thanks for watching.

@georgeanderson3754 4 жыл бұрын

Don’t need to remove caliper, abs sensor, backer plate, etc.to remove axel.

@TRQ 4 жыл бұрын

+george anderson - Good info, Thank you!

@m8driver578 4 жыл бұрын

Could you please explain more? Thanks for the insight!!! I think I found it here: kzfaq.info/get/bejne/eMenqNuCrc64d6c.html

@wilfredocarracelas7351 Жыл бұрын

The video is ok for replacement , but the frickin boots have no quality, I trust on this brand until I gave one, after 8 months the boots going out , was broke , I don't recommend it