How to Replace Front Brakes 00-04 Chevy Monte Carlo

Рет қаралды 54,035

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/RABFS00053
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 00, 01, 02, 03, 04 Chevy Monte Carlo.
This process should be similar on the following vehicles:
2000 Chevrolet Monte Carlo
2001 Chevrolet Monte Carlo
2002 Chevrolet Monte Carlo
2003 Chevrolet Monte Carlo
2004 Chevrolet Monte Carlo
2005 Chevrolet Monte Carlo
2006 Chevrolet Monte Carlo
2007 Chevrolet Monte Carlo
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ova/1AXAA00013
• 15mm Socket 1aau.to/ouV/1AXAA00015
• 19mm Socket 1aau.to/ojm/1AXAA00043
• Ratchet 1aau.to/owG/1AXAA00016
• Bearing Grease
• Brake Parts Cleaner
• Mineral Spirits
• Jack Stands 1aau.to/ofU/1AXAA00065
• Large C-Clamp
• Wire Brush 1aau.to/ob3/1AXAA00079
Subscribe: / @1aauto
Check out our playlist:
Chevy Monte Carlo 2000-2007 6th Gen: • Chevy Monte Carlo 2000...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/HM/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 21

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@__WJK__ 6 жыл бұрын

Well done but looks like they forget to mention popping the lid on the brake reservor prior to pushing the brake pistons bake in.

@WhistleTeets85 6 жыл бұрын

GM brakes are the most straight forward and easiest I've ever changed. Love it.

@1AAuto 6 жыл бұрын

+Whistle Teets Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/brake-pad-and-rotor-kit-front-raybestos--sgd699c%2c-56641r/i/rabfs00053?KZfaq&CTA+Comment&AeuHiokfjH4

@TalentedHands804 4 жыл бұрын

I just want to take the time to say thank you so much for your videos... as a women you have allowed me to fix numerous things on my car myself .... thank you

@eddiespagetti8395 2 жыл бұрын

So simple. My dad showed me how to do brakes when I was 16 and I have done all my family's brakes over last 40 years. Save money and do it yourself folks , it's simple

@RyGuyDCL 7 жыл бұрын

My brother helped me do this years ago and this time I'm doing it myself. This is very a helpful video! Thank you!

@1AAuto 7 жыл бұрын

+Ryan Kuehl Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/brake-pad-and-rotor-kit-front-raybestos--sgd699c%2c-56641r/i/rabfs00053?KZfaq&CTA+Comment&AeuHiokfjH4

@roelflores8436 8 жыл бұрын

Nice clean job!

@1AAuto 8 жыл бұрын

+Roel Flores Thanks for watching. We're glad you liked it. 1aauto.com 866-403-3393

@BWAY10 6 жыл бұрын

Just changed my front and back pads on my Monte Carlo and I seem to lost pressure in break pedal. Pumped it a ton and nothing helped. I’m gonna try to blead them but I don’t understand why that would be the problem after not touching anything besides the pads

@eddiespagetti8395 Жыл бұрын

You must take off the master cylinder cap before change the brakes. Air is in the lines now. Bleed after doing if master cylinder cap was left on

@DownaMonster 9 жыл бұрын

I noticed you didn't put on the metal squeakers, are those necessary

@eddiespagetti8395 2 жыл бұрын

No they are not nesasary at all. Just a pain in ass when wear down. Most people know when brakes are getting bad

@tykendrick800 Жыл бұрын

Literally came here for the axle nut size and that's the only part he skipped😭

@jackhammer1911 5 жыл бұрын

Make sure you put the sliders in their correct hole. They are different. The smooth pin with the smaller end piece goes on top He pointed to it before he installed it in the top hole

@1AAuto 5 жыл бұрын

+Jack Hammer Thank you for your feedback!