Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS01042
This video shows you how to install new, quality TRQ brake pads and rotors on your 2011-2021 Jeep Grand Cherokee. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oaac/1AXAA00020
• 21mm wrench
• 10mm Socket 1aau.to/obJG/1AXAA00017
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/otE/1AXAA00266
• 23mm Socket
• 27mm socket 1aau.to/oaD/1AAST00007
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaQ/1AXAA00289
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obJG/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/ocaG/1AXAA00015
• Torque Wrench 1aau.to/obd6/1AXAA00044
• Gloves 1aau.to/oba3/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• 11mm Allen Wrench
• Floor Jack 1aau.to/oazy/1AXAA00068
• Jack Stands 1aau.to/oamn/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.