√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

'07-'09 Oil capacity Front (4WD models) Vehicles with a manual transmission 1.5 qt. (1.4 L, 1.2 Imp.qt.) Vehicles with an automatic transmission 1.7 qt. (1.6 L, 1.4 Imp.qt.) Rear Vehicles with a rear differential lock 3.1 qt. (2.9 L, 2.6 Imp.qt.) Vehicles without a rear differential lock 3.2 qt. (3.0 L, 2.6 Imp.qt.) Oil type and viscosity Front (4WD models) Hypoid gear oil API GL−5 Vehicles with an automatic transmission SAE75W−85 Vehicles with a manual transmission Above 0 F (−18 C): SAE90 Below 0 F (−18 C): SAE80W or 80W−90 Rear Hypoid gear oil API GL−5 Above 0 F (−18 C): SAE90 Below 0 F (−18 C): SAE80W or 80W−90

that is one rusty FJ Cruiser....

These plugs are notorious for rounding/stripping. Wish mine cracked loose that easy!

is it the same for a manual transmission FJ? thanks and great vid!

Easy, thanks!

What is the hex bit you use to remove the fill and drain plugs? Thank You.

I'm a little confused toyota specs call for 75-90 in front differential

Why the hell wouldnt someone respray all those bash blates and clean up under there? I ve got a couple of Fjs from new and i i rented a day or two on a hoist and coated everything underneath both of them. Look after her and shel last a lifetime.

You used the wrong oil weight. The Toyota manual recommended 75w-90 for the part time 4x4 FJ. The 80w-90 is for the full time.

Also why do you guys call buckets and bins receptacles???

Double check your rigs specs. But torque is 29 Ft Lbs on the fill plug. AND the drain plug is 48 ft lbs.

Must be a East coast FJ 😬