Рет қаралды 6,443
Buy Now!
New Driveshaft from 1AAuto.com 1aau.to/ia/1ADSH00063
This video shows you how to install a new front driveshaft from TRQ on your 1998-2011 Ford Ranger.
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/oYB/1AXAA00020
• 8mm Socket 1aau.to/obmQ/1AXAA00017
• T30 Socket
• Ratchet 1aau.to/obKJ/1AXAA00016
• Socket Extensions 1aau.to/obHr/1AXAA00015
• Torque Wrench 1aau.to/oaP9/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oarM/1AXSS00048
• Safety Glasses
• 6mm Hex Socket
• Floor Jack 1aau.to/oaeh/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o2K/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/ouH/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.