Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASLF00435
This video shows you how to install new control arms in your 2004-2009 Toyota Prius. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• Pry Bar 1aau.to/oXv/1AXAA00020
• 19mm Wrench 1aau.to/oZJ/1AXAA00010
• 17mm Socket 1aau.to/obER/1AXAA00015
• 19mm Socket 1aau.to/oanA/1AXAA00043
• 21mm Socket 1aau.to/oanA/1AXAA00043
• Ratchet 1aau.to/obIA/1AXAA00016
• Socket Extensions 1aau.to/obER/1AXAA00015
• Torque Wrench 1aau.to/oaMF/1AXAA00044
• Gloves 1aau.to/oan6/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oabN/1AXAA00068
• Jack Stands 1aau.to/oYJ/1AXAA00065
• Pole Jack
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.