Рет қаралды 11,521
Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AACV00319
This video shows you how to install a new front right CV axle in your 2006-2009 Mercedes Benz E350. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obxh/1AXAA00013
• Pry Bar 1aau.to/o3c/1AXAA00020
• 21mm wrench
• 22mm Wrench
• 17mm Socket 1aau.to/obN9/1AXAA00015
• 21mm Socket 1aau.to/oaun/1AXAA00043
• 27mm socket 1aau.to/oag/1AAST00007
• 8mm Socket 1aau.to/obsE/1AXAA00017
• Ratchet 1aau.to/obSN/1AXAA00016
• Torque Wrench 1aau.to/oaV7/1AXAA00044
• Gloves 1aau.to/oaC6/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oakj/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o8q/1AXAA00065
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.