Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ib/1ASTS01081
This video shows you how to install new front struts from TRQ on your 2007-2012 Nissan Versa. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• Pry Bar 1aau.to/oVU/1AXAA00020
• 14mm Wrench 1aau.to/oXY/1AXAA00010
• 21mm wrench
• 13mm Socket 1aau.to/obAk/1AXAA00015
• 14mm Socket 1aau.to/obAk/1AXAA00015
• 18mm Socket 1aau.to/oakk/1AXAA00043
• 21mm Socket 1aau.to/oakk/1AXAA00043
• 22mm Socket 1aau.to/opd/1AXAA00266
• Strut Spring Compression Tool
• Pliers
• Ratchet 1aau.to/obFv/1AXAA00016
• Socket Extensions 1aau.to/obAk/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaJp/1AXAA00044
• Gloves 1aau.to/oafL/1AXSS00048
• Marker / Writing Utensil
• Painter's Tape
• Safety Glasses 1aau.to/o8H/1AXAA00343
• Chisel 1aau.to/okZ/1AXAA00055
• Floor Jack 1aau.to/o8V/1AXAA00068
• Hammer 1aau.to/oVQ/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.