How to Replace Front Sway Bar Bushings 2011-2019 Ford Explorer

Рет қаралды 6,203

5 ай бұрын

Buy Now!
New Sway Bar Bushing Set from 1AAuto.com 1aau.to/ia/1ASMX00613
This video shows you how to install new sway bar bushings on your 2011-2019 Ford Explorer. The sway bars on your vehicle connect the shocks or struts together for additional stability. Since they have to cross the underside of the vehicle, they are attached at several points along the way. The bushings cushion and dampen those attachments to reduce noise and wear. Over time rubber bushings crack and rot, which could lead to clunking or scraping at the sway bar attaching points.
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Pry Bar 1aau.to/o6k/1AXAA00020
• 13mm Wrench 1aau.to/o95/1AXAA00010
• 13mm Socket 1aau.to/obYk/1AXAA00015
• 18mm Socket
• 19mm Socket
• Ratchet 1aau.to/ob2N/1AXAA00016
• Torque Wrench 1aau.to/oa5A/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oLP/1AXSS00035
• Gloves 1aau.to/oaSw/1AXSS00048
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oasp/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oaex/1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 5

@TRQ 4 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@jmojameson 18 күн бұрын

Heard some clanking noises coming from the front of my explorer and noticed one of the bolts was coming out and the mount was cracked. Was impossible squeezing in to get those bolts out until I saw you could move the rack. Great tip, thanks a lot man!

@aiorimotov.253 2 ай бұрын

Thank you so much for this tutorial.

@glenn2226 2 ай бұрын

Could have used a wire brush to clean up some of rust….bolts could have used a good cleaning or new bolts, same for bracket. Good info though. Good thing to have air ratchet for that tight fitting area.