How to Replace Front Sway Bar Link 05-15 Toyota Tacoma

No video

How to Replace Front Sway Bar Link 05-15 Toyota Tacoma

Рет қаралды 46,742

Күн бұрын

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASSL00384
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on yourToyota Tacoma.
• Check here for more videos on the 2005-15 Toyota Tacoma • Toyota Tacoma 2005-15 ...
This process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• 18mm Wrench
• 17mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• Locking Pliers 1aau.to/oa/1AXAA00139
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Torque Wrench 1aau.to/oa/1AXAA00044
• Rust Penetrant
Subscribe: / @trq
Check out our playlist:
Toyota Tacoma 2005-15 2nd Gen: • Toyota Tacoma 2005-15 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 31

@TRQ 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@c1rca23 4 жыл бұрын

I ordered and just received the 10 piece suspension replacement kit (ball joints, tie rods and links) for my 2014 TOYOTA Tacoma. Gonna tackle it all tomorrow! Quick shipping and great prices. ! Thanks for the videos. You got a new customer. David

@JustTooChill87 4 жыл бұрын

Super helpful video! Thanks! I attempted to take the upper bolt out of the end link to help give me more space to replace my CV axle and managed to slightly loosen it but couldn't get a grip on the washer to keep it from spinning. Now I know how to get it back on tight!

@KnightSwan 3 жыл бұрын

Thanks for the video. Replacing mine tomorrow. Looks pretty straightforward, thankfully. Watched your video to make sure there wasn’t any unforeseen complications. It appears there aren’t. Thanks (again).

@TRQ 3 жыл бұрын

+krorob100 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@rappinron1384 2 жыл бұрын

Looks like this Tacoma was pulled out of the ocean after sitting at the bottom for 20 years.

@johnknowles6894 4 жыл бұрын

Thanks for the video, this will come in handy when I replace mine tomorrow

@digginz8603 2 жыл бұрын

my uncle sent me this. I subscribed. good video!

@randellwolfe4555 8 ай бұрын

Love the people and weather here 😊

@randellwolfe4555 8 ай бұрын

If you have any more footage of that bar that you took, I would love to see it as I would love to see my former Navy shipmates from 35 years ago

@virginiafrancis403 2 жыл бұрын

Do you have to lift and take the wheel off to do this?

@brianc6739 4 жыл бұрын

My link connects to sway bar at the top and control arm at the bottom. It has a pro comp lift. Is that okay? I don’t think I could flip it without it hitting tie rods and other stuff.

@leestringer Жыл бұрын

how important is the torqueing part for the link?

@reidbennett3586 10 ай бұрын

This can be a real PITA, the stock ends on my TRD OR truck have about 1mm wide of clearance for a vice grip to grab, on what should be a hex piece buts it's a perfect circle. New sway bar end links I bought have a fatter hex piece to grab if I ever need to change them again. The other option is to use an allen key but it's in front of the shock, so you need a small key in order for it to go in straight and a wrench. Not a good leveraged position to break the nut loose. I'm just cutting it off.

@randellwolfe4555 8 ай бұрын

Oh wow, how did I get onto your video lol

@beardedboarsoutdoors922 Жыл бұрын

You started with 17 mm and finished with 18mm. Does new parts have different size bolts?

@juanjosemedina8272 3 жыл бұрын

When you install both sway bar link your toyota need alignment??

@JamminWithJake 3 жыл бұрын

Not with sway bar work.

@alanchanthavisouk8557 2 жыл бұрын

What do u call this plier?

@ipaisnice 3 жыл бұрын

What were the issues to cause you to change these out?

@Toxic-FhuYu 2 жыл бұрын

It snapped

@ArcheryRuleZ 11 ай бұрын

Ya, that bottom one would only come off with a 4” electric grinder on my truck

@christophertheulen4964 3 жыл бұрын

Do you guys suggest an alignment after?

@wickedbassn 2 жыл бұрын

Nope. You aren't changing the geo.etry of the suspension.

@Toxic-FhuYu 2 жыл бұрын

As long as you’re not readjusting the tie rods you should be fine

@randellwolfe4555 8 ай бұрын

I returned 2 years ago to retire in Thailand 2

@Originalxlander 3 жыл бұрын

That is the easy type where is the apex type?

@TRQ 3 жыл бұрын

+Amnesia Iforget We do not have a video for apex type, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

@pierogi210 2 ай бұрын

My toyota dealership recommended to replace these for $460 parts and $140 labor. LOL i think i'll do it myself for a fraction of the cost.

@WhyDidYTstartThisHandleShit Жыл бұрын

good vid but whys that thing rusted out so bad.. jeez. what a junker.