√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@tun6006 Жыл бұрын
All your videos are simple and straight forward which I love. I just wish I had access to a quarter of the tools and space to do any of this stuff myself.
@billyeason98993 жыл бұрын
Ratchet wrench dominates here
@calebs54693 жыл бұрын
That's all I was thinking the whole video
@edwardinvegas2 жыл бұрын
2 comments. Need (easier) to use a ratchet wrench for removing the nuts. You didn't torque the nuts for the Front Sway Bar TOP nut is 28 Foot lbs. BOTTOM nut is 25 Foot lbs. as per the Honda Service / Repair manual.
@collinasgarali27772 жыл бұрын
good mechanic. good job. patience is always the key
@kneebarx Жыл бұрын
no way these come off that easily...
@jaredreynolds7192 Жыл бұрын
I use pliers or a vice grip to crack it free it tears the boot in the process but if it's being replaced it doesn't matter makes it a lot easier and faster
@buskerbusker88262 жыл бұрын
Should you align the wheels after this?
@txkwrld2 жыл бұрын
every time you work on suspension get a alignment
@onilovni12344 жыл бұрын
I bought new links for all 4 wheels on my Acura TL and I can't wait to change them to get rid of the rattling noise! Does anyone know why Honda sway bar links make so much noise even if they appear to be alright?
@FleetTech973 жыл бұрын
Make sure when checking them that both front wheels are off ground. Because if you just jack up one side the link Is under tension and won’t make noise
@allantreyes44453 жыл бұрын
Sometimes the nuts are only loose need only to tighten them.
@Mission7608x22 жыл бұрын
Any reason you don’t use impact tools in your videos? Is it the noise or you guys just don’t like them?
@Barn945 жыл бұрын
its about time for a news brush
@1AAuto5 жыл бұрын
+BarnHaas Thanks for checking us out!
@BigPackets Жыл бұрын
what do you do if you stripped the allen key?
@eckoblaze5 жыл бұрын
Civic 2010 making clicking noise when turning steering wheel.. maybe this is the culprit? Or other bushing joints?
@SnedzTheBricklayer5 жыл бұрын
I can do this!!! Just starting out with car DIY , can you recommend good Jack's or something to lift the car off the ground and won't kill me? Lol
@1AAuto5 жыл бұрын
+Gaming Construct Thanks for checking us out! You can go with our kit that comes with the trolley jack and 2 jack stands. This will be sufficient with a vast majority of vehicles. This is a great starter jack and the link to this is www.1aauto.com/trolley-jack/i/1axaa00068
@craigmoorer59275 жыл бұрын
Take this from someone who has screwed around with those Allen keys; don’t even bother. Just take a grinder and cut the bolt out on the side of the rubber boot on the link.
@reeda.11053 жыл бұрын
I love you guys so much lmfao
@gwhite09925 жыл бұрын
In the northeast.....take grinder and cut through rust, 2min done
@craigmoorer59275 жыл бұрын
Xactly.
@brianr.5414 жыл бұрын
Where exactly did you cut them off? I'm thinking this is what I will need to do on my 2008. And did you use a regular angle grinder?
@tonistarks28743 жыл бұрын
Dude I did the same for all my all my four sway link bars on 2007 civic Honda..When I tried the first and saw that the car had its original Oem sway links bars and the rust and troublesome it was giving me.I said screw and busted it out my grinder...real fast !
@turdsandwicher Жыл бұрын
@@tonistarks2874 Did you cut the nuts off or where did you cut with the grinder?
@Goodnightandgoodluck-c7m3 ай бұрын
Is there a need for alignment after this? Anyone thanks
@soufianemess76814 ай бұрын
Hi, if anyone has an answer to my question please welcome! I just removed the link it from my civic then I realized the new one are slightly different in a way that it doesn't do a 90 degrees, it's slightly leaning. These are the original ones tho! Does anyone have an explanation?
@LopSidedPopCan6 жыл бұрын
Will this be the same as the si?
@trevlouie6 жыл бұрын
similar but should be the same
@LopSidedPopCan5 жыл бұрын
SFN Poker thank you!
@jean-pierremallet35248 ай бұрын
I put AC delco links on all 4 and fronts are failing after only 1.5 year. should have put oem honda links. originals lasted 14 years
@primalphatman Жыл бұрын
What if u used the allenkey to tughten the links?
@skunkycatog3 жыл бұрын
What would be the reason for switching these?
@josephfarr29883 жыл бұрын
The rubber bushings get bad after a while and become loose causing a knocking sound while driving, not a major safety issue but it could affect the handling of the vehicle
@aa-mc9ci3 жыл бұрын
Who is one is right ?who is one is left?
@AD-pb4vq Жыл бұрын
Any torque spec for the link?
@monicosanchez7320 Жыл бұрын
Anyone know the size for front sway bar bolt size
@whatdadogdoin7531 Жыл бұрын
Do I need to get an alignment after this??
@1AAuto Жыл бұрын
+what da dog doin?? Yes, you would need an alignment after this installation.
@jackslater22974 жыл бұрын
What size/drive breaker bar is that?
@charbelsalem29653 жыл бұрын
How much the price for the original
@everything28724 ай бұрын
If you strip it cut it off.
@1970sthrowback4 жыл бұрын
Good vid but thats the most lacklustre wire brushing I've ever seen, Ive brushed my teeth harder. Give it some welly !
@oldrestless3 жыл бұрын
What the helly is welly? Where’s that term from
@chetanhanda6 жыл бұрын
How can you tighten it without a torque wrench ? what do you mean nice and snug ?
@FlameHazeist5 жыл бұрын
It means don't overtighten (apply excessive force for a socket of that size) or undertighten (apply too little force). When in doubt, tighten a nut first, then put on a second nut and use a torque wrench to get the feel for it.
@Elquenosequeda4 жыл бұрын
What's the torque specs on the sway bar links?????
@Juan-yr8eu3 жыл бұрын
25 lb/ft
@johnbugman15 жыл бұрын
What was the purpose of changing these out? Car symptoms ??!
@TylertheGeek285 жыл бұрын
A knocking or clunking noise coming from any side of the vehicle when going over bumps, almost sounds like a broken shock but you can definitely feel something is wrong with the steering.. trust me all four of mine are broken lol
@1AAuto5 жыл бұрын
+Rezuh Snipes Bad handling and a rattling noise from the tire area
@turdsandwicher Жыл бұрын
@@TylertheGeek28 I have a Civic and mine is completely broken on the passenger side. But I didn't notice any issues with the car I only noticed because I was changing tires.
@wade48395 жыл бұрын
My car doesn't have these 2007 honda civic type s 2.2 Europe
@1AAuto5 жыл бұрын
+Wade Ragsdale While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. 1aauto.com
@arielunicorn24425 жыл бұрын
What the simpton if stabilizer link filure bos?
@1AAuto5 жыл бұрын
+Ariel Unicorn Typically, you will hear some knocking noises coming from the strut area. 1aauto.com