How To Replace Garage Door Torsion Springs

Рет қаралды 1,459,776

Күн бұрын

In this video, we show how to replace standard garage door torsion springs.
Buy Standard Garage Door Torsion Springs - ddmgaragedoors.com/springs/st...
How to Measure - ddmgaragedoors.com/diy-instru...
Visit our Web Site - ddmgaragedoors.com
About us - ddmgaragedoors.com/about-us.php
- - SAFETY WARNING: PLEASE READ DETAILS BELOW BEFORE ATTEMPTING - -
Replacing garage door torsion springs is dangerous because the springs are under tension. The directions in this video hopefully will help guide you in safely replacing your springs, but there are no guarantees. It is impossible to cover every dangerous situation you may encounter. If you fail to use the right tools or if you don't follow safe procedures, you could lose hands, limbs or even your life. You could also damage property.
Doing the job right is your responsibility. We recommend that you carefully study all the instructions and warnings at ddmgaragedoors.com/diy-instru... before beginning your work. If you have any doubts about your ability to safely change your springs, we recommend you hire a professional to repair your garage door.
FOR YOUR SAFETY CAREFULLY FOLLOW THE INSTRUCTIONS ON THE VIDEO.
1. Always wear safety glasses.
2. Unplug garage door opener.
3. Disengage opener from the door.
4. Always stay out of the path of the winding bars and winding cone to prevent possible injury or death.
Necessary Tools:
1. A Pair of 1/2" winding bars, taped at 1" from the ends
2. A sturdy step ladder
3. A couple of vice grips
4. A set of appropriately-sized open-ended AND socket wrenches
5. A file
6. Tape measure
7. Oil can OR 3-in-1 oil
8. Light Spray Paint
9. Permanent Marker
Instructional Summary:
1. Establish Safety
2. Measure Springs
3. Unwind Your Unbroken Spring
4. Loosen Torsion Hardware
5. Replace Both Springs
6. Secure Torsion Hardware
7. Tension Both Springs
8. Test Door Operation
Helpful Links:
For tips on how to repair, replace, or maintain your garage door, visit ddmgaragedoors.com/diy-instru...
To order other parts for your garage door, visit us at ddmgaragedoors.com/parts/
If your door opens partway and gets stuck after installing the springs - • DDM Tech Tips: Trouble...
Additional types of Garage Door Springs - ddmgaragedoors.com/springs/ga...
Dock Leveler Parts - ddmgaragedoors.com/dock-level...
Find a Local Garage Door Repair Company - ddmgaragedoors.com/garage-doo...
Video Recorded and Produced by Mike Herbert.
#ddmgaragedoors #garagedoorsprings #torsionsprings #garagedoorrepair
(Note: Smart shoppers recognize quality videos and fake reviews with phony thumbs down. One competitor hires click farms ddmgaragedoors.com/blog/2016/... to boost his site and to put others down. It's just a variation of the kids' game, King on the Hill.)
0:00 Introduction
0:29 ESTABLISH SAFETY
1:12 Measure Springs
2:04 Unwind Your Unbroken Spring
4:14 Loosen Torsion Hardware
6:19 Replace Both Springs httpad
8:21 Secure Torsion Hardware
11:41 Tension Both Springs
16:02 Test Door Operation

Пікірлер: 1 400

@jcortizenterprises 9 жыл бұрын

This should be the blueprint on how to produce "do-it-yourself" videos. Excellent work.

@DDMGarageDoors 9 жыл бұрын

Light of the Earth Thank you for your lavish comments.They make the tedious, painstaking work worth it.

@mikesheajr6226 7 ай бұрын

11 year old video and this video is the only reason my garage door is working right now. Thank you for the comprehensive instructions! Oh and I still have all my fingers and eyeballs!

@jahglory23 3 жыл бұрын

Quite possibly the best how to video ever made in the history of how to videos.

@DDMGarageDoors 3 жыл бұрын

Thanks for your kind words, charlie! We hope that this proved helpful in getting your springs replaced! Blessings!

@IamJakePark 7 ай бұрын

This is the Gold standard for all garage door torsion spring repair how to’s. Thank you.

@nafod 6 жыл бұрын

To everyone's surprise in my house, I successfully replaced my springs without dying. Many thanks for this video!

@DDMGarageDoors 4 жыл бұрын

We're glad you were able to replace your springs safely, Mike! Thanks for watching!

@denniss3980 7 жыл бұрын

My spring broke this week, and have watch half a dozen videos to learn how to repair it. This has been the best video so far. I do not understand the large number of thumbs downs. From what I can tell you covered everything.

@DDMGarageDoors 7 жыл бұрын

Thank you for your kind comments, Dennis. Based on the geographic location of the clicks, we believe that a large percentage of the thumbs down were caused by a greedy, jealous competitor who has hired foreign click farms to put down competitor's videos and to promote his own videos and web site.

@VOLTIS5 7 жыл бұрын

Dennis S that's what I was wondering. probably just some mad competitor not liking people doing DYI work to save $

@mannyrob 5 жыл бұрын

You are absolutely right

@dhodges76 3 жыл бұрын

Agree with you Dennis. Too bad about those negative reviews. This video was excellent.

@DDMGarageDoors 3 жыл бұрын

@@dhodges76 Thank you Doug, manny rob, and VOLTIS5 for the kind words. We're glad you all found this to be a helpful video to getting your springs replaced!

@heinzimhof 6 ай бұрын

Best of any spring replacement videos with safety first.

@wpnsloader 10 жыл бұрын

This is one of the most comprehensive how to videos I have watched in the past few years. Your attention to detail and safety are spot on. Thanks for posting this video. Gary

@DDMGarageDoors 4 жыл бұрын

We're glad you found it to be helpful, Gary! Safety is always the number one priority. Safety first, then work!

@felixcaceres4051 4 жыл бұрын

This is probably one of the best instructional videos I've seen. You have a gift for teaching. Clear, step by step, and detailed.

@DDMGarageDoors 4 жыл бұрын

Thank you for the kind words, Felix! We're glad that you found this video clear and easy to follow! Blessings!

@vinceciaccio4188 10 жыл бұрын

Dan, this has to be the by far the best video on KZfaq I have ever seen. I consider myself a decent all around homeowner handyman and I have tackled just about everything from electrical to plumbing to masonry and woodworking in my home. I did have had my springs replaced a few years ago and observed the guy replace it and decided I would not attempt it myself as it looked too dangerous. Your instructions are so clear and the warnings so in place that I feel confident about replacing it myself. Congratulations on a great instructional video and thank you for sharing your knowledge.

@DDMGarageDoors 8 жыл бұрын

+Vince Ciaccio Thank you for taking the time to post such kind and generous comments. Hundreds of hours have gone into writing and producing the video to show how easy it can be to replace garage door torsion springs. But, it's also dangerous. And we discourage people from trying this if they don't feel confident they can do the job safely. You're welcome. Best wishes!

@timhoy 10 жыл бұрын

Amazing video, garage door springs are no longer a mystery. Detailed and very clear. Thank you for taking the time to do this for us.

@DDMGarageDoors 10 жыл бұрын

You're welcome, and thank you for your kind comments. Best wishes.

@Lorestat 4 жыл бұрын

This Video deserves an Award. Great example of a How To Video..

@DDMGarageDoors 4 жыл бұрын

Thanks Stan! We're glad you found it helpful!

@steveoconnor1527 11 жыл бұрын

Very very thorough. Safety is stressed and reinforced as it should be. Wonderful work with the video camera to show details.

@bryanzielinski1663 8 жыл бұрын

I am pretty handy and I have owned my own homes for the past 25 years. I can probably count the amount of people that I have hired on one hand. I have done many remodels and basic maintenance involving Electrical, Carpentry, and Plumbing but I had never had to install torsion springs. This was one of those thing that I thought I may have to hand over to a pro. I want to thank you for your video because it was very detailed and I was excited to start. I knew after this video that I understood the basics which will probably help me to maintain my garage door better from now on too. I ran into one problem caused by the original install. The shaft was not slipping through the bearing making it impossible to remove the cable drums. It seemed that the original installer turned the set screw a little too much which took the shaft out of round. To avoid damaging the bearing, and now knowing the basics, I removed the bearing retainers (one at a time), and took them off of each end, which allowed me to clean and lube them effectively. With your detail, the step by step instructions, me being really careful, as well as the added labor due to the damaged shaft, I still installed the springs successfully in a little under an hour.

@DDMGarageDoors 7 жыл бұрын

Bryan, it sounds like you're quite handy. Doing the work in less than an hour, even with the problem you had, is impressive. You're welcome, and thank you for your helpful comments. When we were producing the video I was aware of dozens of exceptions to the normal procedure. We could have easily produced 10 videos to cover the variations. Hopefully others will be able to learn from the steps you followed to work around damage from an improper installation. I've seen many of these over the years.

@bryanzielinski1663 7 жыл бұрын

I meant to ask. How on earth did you get a tortion spring to break on video? Thanks again.

@RajPaulSeattle 5 жыл бұрын

Yesterday, I installed two new springs on 2-car BIG 8'x16' garage door. This was the best most useful, no smarty-pant video. Thank you neighbor, whereever you are. Thank you.

@DDMGarageDoors 4 жыл бұрын

We're happy to help, RajPaulSeattle! We're glad this helped you install your springs successfully!

@pmoh 11 жыл бұрын

Thank you, your video saved me $100 worth in labor.

@edtrembicki-guy993 7 жыл бұрын

Thank you Dan, for sharing your 30+ years experience in video and written instruction. You covered every base and gave me the confidence that I was replacing the spring safely and correctly. The end result is that my garage door is back in working order, better than before.

@DDMGarageDoors 7 жыл бұрын

Congratulations, Ed! Glad to hear we could provide the confidence to do the job well. You're welcome, and thank you for your kind comments. Best wishes.

@yairchuri6225 11 жыл бұрын

Thank you so much for putting this together. I followed you step by step and felt like I have a professional right there at my garage walking me through this. Thanks again! Yair.

@donaldgraff2116 10 жыл бұрын

Thanks Dan, really appreciate your old school attention to detail and presentation.

@DDMGarageDoors 4 жыл бұрын

Thanks for watching, Donald! We're glad you appreciated all the details.

@AliHSyed 5 жыл бұрын

This guy knows what he's talking about. His warnings should be dutifully followed.

@DDMGarageDoors 4 жыл бұрын

Hi Ali! Yes, safety should be the thing that is followed closest with this video. It's important to understand what some of the risks are with completing a replacement yourself so that you can ensure your safety when working. As we always say: safety first, then work!

@DDMGarageDoors 8 жыл бұрын

There are several KZfaq videos where the installer doesn't stretch the springs after winding. Experienced professionals, however, understand that without stretching the springs the doors often will not seal the floor completely after closing. The problem with winding the springs outside the winding cone is that there is no way to safely stretch the springs. You have to position your head right in the path of a winding cone when it is most stressed. That's dangerous! The only way to safely wind the spring and to stretch it afterward is the way we show on this video.

@seinundzeiten 5 жыл бұрын

I saw that.

@nhbilly 4 жыл бұрын

Good info. Best DIY video.

@DDMGarageDoors 4 жыл бұрын

Thank you, nhb! We're glad you found it to be helpful.

@TzachyB 3 жыл бұрын

This is one of the very best instructional videos I’ve ever had the pleasure to learn from. Just completed fixing our garage, for about $95 in parts and new tools instead of repair shops quotes of $360 and higher. (Every project is an excuse for new tools!!) Thank you so much and best wishes!

@DDMGarageDoors 3 жыл бұрын

That is true, TzachyB! New projects often require them, and it's often fun to figure out how to work on something different yourself. We're glad you were able to save some money, and fix your garage door safely. Blessings!

@robertcomrie1199 10 жыл бұрын

Most comprehensive and easy to follow video I've seen so far on garage door torsion spring installation. Thanks

@DDMGarageDoors 4 жыл бұрын

Thanks for watching, Robert! We're glad that you found the video easy to follow! Blessings!

@czissman1 10 жыл бұрын

Dan: This is one of the most well-done, step-by-step videos I've seen. You didn't go into ridiculous detail when it wasn't necessary, and you slowed down enough to get important points across when it was. The video very clearly showed every detail needed for the viewer to get complete understanding of your narrative. Your spoke clearly and intelligently, at a pace appropriate for the material. No wasted moments here, not annoying music or flashy effects, just the information a view needs to do the job at hand. Thanks for such a great video! And for those of you reading, this: No, I don't know Dan or his company; I just really appreciate a quality tutorials and give kudos when they're due.

@DDMGarageDoors 8 жыл бұрын

+czissman1 Thank you for taking the time to post your generous words. My videographer, Mike Herbert, was great at capturing and highlighting important points, as well as regulating the speed of the production. The biggest challenge in scripting the video was in distilling text from the larger written 2005 tutorial and shortening it to fit the video time frame. It was also a challenge to match text, voice and video. This part must have taken 20-30 hours.

@stevefournier1901 7 жыл бұрын

Thanks so much, you gave me confidence to try it. Now I'm sitting back watching my garage door open and close as it should with 2 new springs :) great video.

@DDMGarageDoors 7 жыл бұрын

You're welcome, Steve, and thank you for your kind comments. I'm glad to help you extend beyond your comfort zone. Best wishes.

@nathanweidner2323 7 жыл бұрын

I would like to personally thank you for this video. It was perfect, very detailed and helpful. It was the only video I could find that included every step needed. From the amount of turns the springs needed, to tightening the springs to the bar and everything in between. I move from Michigan where the garage doors are light to, Coastal S.C. where the doors are hurricane rated and pretty heavy and it worked perfect. Great instructional video.

@DDMGarageDoors 7 жыл бұрын

Nathan, Thank you for your generous comments, and you're welcome. Glad to hear you had all the details needed to finish with perfect results. Those hurricane rated doors can be difficult to spring. Because of the extra reinforcements the doors sometimes weigh over a 100 pounds more than the standard doors. Best wishes.

@brayster42 11 жыл бұрын

Best video for this project. I saw most of the others and they are not this detailed and clear. I especially like the spray paint idea. It was easy to see that the spring was winding correctly.

@closetcleaner 8 жыл бұрын

I bought my garage door springs from Dan a few years back. We even exchanged a couple of emails on some of my questions. I was very pleased with their delivery and customer service. I recommend this company.

@DDMGarageDoors 7 жыл бұрын

Thanks you for the recommendation, Rene. I'm glad we could help. Best wishes.

@chrisc8207 7 жыл бұрын

Thank you for producing this video, what an excellent tutorial. Your attention to detail and presentation is second to none, very very helpful. Very kind of you to share your experience with us!

@DDMGarageDoors 7 жыл бұрын

You're welcome, Chris. Thank you for your generous comments. The details grew out of replacing 20,000 to 30,000 springs in my 30+ years in the trade. It's much easier to replace springs than to write all the steps for replacing them; it's tedious work.

@keithleroy8833 10 жыл бұрын

Excellent Video! The best one on replacing garage door springs.

@DDMGarageDoors 9 жыл бұрын

Keith LeRoy Thank you, Keith, for your generous words. Best wishes.

@ThePatrickBateman69 11 жыл бұрын

Dan Thanks for your help. This is the most professional way explained and most professional clear video graphic film ever i seen. There is no question left after watch this video. I advise to people they want to broadcast their videos on you tube must watch this video. thanks Dan again.

@pauleohl 10 жыл бұрын

This is a very thorough instructional video. No music, no jazz; just useful information.

@DDMGarageDoors 4 жыл бұрын

Thanks Paul! We're glad that you found the video to be thorough and well-done! We hope that you were able to get your springs replaced in no time flat!

@HF-di9rt 10 жыл бұрын

A well made and informative video. Thank you

@DDMGarageDoors 10 жыл бұрын

Thank you, Hugh. Best wishes.

@nerdbrick1 7 жыл бұрын

Great Video Guys!!.. Sad that your compitition would use bots to give you a Thumbs Down rating, becuase this HANDS DOWN the best video on Torsion springs. I like the attention to detail..

@DDMGarageDoors 7 жыл бұрын

Thank you for your kind, encouraging and generous words. Smart thieves know how to steal without getting caught, but this one will one day answer to the all-knowing God, Who judges the unrighteous, Who guards the paths of justice and Who watches over the way of His saints. (Proverbs 2:8)

@tonyb1712 11 жыл бұрын

This is one of the best "How to" videos on you tube. Step by step instruction including all tools needed. Its like a well thought out corporate training video.

@71rcode72 6 ай бұрын

Thank you for this excellent video. I just completed this project. One recommendation for you guys trying this is do not take your hand off the inserted winding rods when either tightening or reducing the tension on the spring.

@nickdrake91 4 жыл бұрын

My spring broke last week. This was the best video I found. I watched it a few times, while waiting for the parts to arrive. When changing the springs I found it easier to watch the step, do it exactly as he said, then repeat with the next step. It's easy to skip an important detail if you just try to all w/o refering back to the video. It saved me a couple hundred bucks! THANKS!!!

@DDMGarageDoors 4 жыл бұрын

Hi Nick! We're glad we were able to help out. Many people have said the same; that they find it best to watch one step, do it, and then continue on with the process. If you miss a step, it may be a crucial part to finishing the replacement correctly! You made the right call in double checking.

@diegogdiegog 4 жыл бұрын

I was ready to buy what I thought I needed but one of the reviews (while positive) advised to make certain by searching using specific words and come upon an informative website (DDM Garage Doors). After watching how to determine which springs I needed, I felt you deserved my money, not the other vendor. I took my laptop to the garage and followed the step by step instructions on this video, pausing and reviewing as necessary. Thank you so much for being so thorough and for sharing your knowledge freely. For those that are still shopping for parts: If you find this video useful, please be fair and buy from them.

@DDMGarageDoors 4 жыл бұрын

Thank you for your business, Diego! We're glad you trusted us to go through this replacement with you. We seek to make this easy to follow, and made in such a way that homeowners, with proper safety precautions, are able to complete this repair themselves. We're glad you found this to be true!

@acerh73 4 жыл бұрын

You, sir, are a scholar and a gentleman! Managed to repair my garage door that was popping, jumping, and setting unevenly. Now it’s Keystone smooth!

@DDMGarageDoors 4 жыл бұрын

Hi Ruben! We're glad you were able to get your door up and running again. Thanks for trusting our video to take you through the process!

@jeffschmidt1816 5 жыл бұрын

The Absolute BEST Video for this project !!!!!I haven't replaced springs for 25 Years on a previous home, and just wanted to refresh my memory, and learned something NEW, the "Stretching" last step, Awesome !!!!!Thank You !!!!!

@DDMGarageDoors 4 жыл бұрын

Hi Jeff! We're glad you learned something new! Thanks for the kind words!

@muletree 11 жыл бұрын

Great video. I replaced my spring in 30 minutes thanks to this video

@DDMGarageDoors 3 жыл бұрын

We're glad you were able to replace your springs, so quickly, muletree! Blessings!

@brucegilbaugh1350 10 жыл бұрын

DDM, Thank you for this complete tutorial. Pretty much knew the basics but the additional techniques for the torsion hardware, spools, etc., really cinched the deal.The fellow in the video went at just the right pace and didn't block the camera! Great job to all.

@DDMGarageDoors 4 жыл бұрын

We're glad you think so, Bruce! We hope that this helped ease the process of replacing your springs. Thanks for watching!

@aggieaquarist8470 5 жыл бұрын

DDM and KZfaq to the rescue. Simple clear instructions. Tech support helped me pick the proper longer life spring for my garage door. Straightforward installation. 31 quarter turns was the magic number for me.

@DDMGarageDoors 4 жыл бұрын

Hi Aggie! We're glad to hear that our sales reps were able to be of assistance, and that the install went well!

@Stuckneutral 9 жыл бұрын

I just wanted to say thanks to Dan at DDM. I watched the video a couple of times before buying new springs from DDM and I still managed to get the springs on the wrong side. Luckily I took photos of the installation and Dan was able to identify my problem to get me back on track. I was under the impression the spring would just unscrew if backwards, but that isn’t the case. Thanks again to DDM for the great video.

@DDMGarageDoors 9 жыл бұрын

Stuckneutral The way the springs stay on the cones when they are wound is counter intuitive. When you wind the spring it looks like the winding cone will spin out of the spring. What actually happens, however, is that as you wind the spring, the inside diameter of the spring decreases causing the wire to grip the cone more tightly. When I was a kid we played with Chinese handcuffs. Trying to pull your fingers out of the cuffs caused the cuffs to tighten even more tightly on you fingers. The cones in torsion springs work the same way.

@GearreportdotCom 3 жыл бұрын

Easily the best video on garage door spring replacement that I've found. THANKS!

@DDMGarageDoors 3 жыл бұрын

Hi Gear-Report.com! We're glad that you found this to be helpful to you in your spring replacement! Thanks for watching!

@BrianSwiatowy 11 жыл бұрын

This video was a very helpful guide...I used it step by step to replace a pair of torsion springs after one of them snapped. Thank you very very much!

@helicopterpilot9819 11 жыл бұрын

Best Garage Door Torsion Spring Replacement Video of them all. Well thought out and well narrated with step by step instructions. There is no fluff about the garage door theory and development history as some other videos.

@DDMGarageDoors 3 жыл бұрын

We're glad you think so, Joseph! We hope that this was helpful to getting your springs replaced!

@kdorlich1 5 жыл бұрын

This video saved me at least $250 in labor costs. Job done! THANK YOU!!!! I bought my parts before I found you guys but I'm going to your site and sending you a donation for your media production efforts. This what the internet was made for!!! Keep up the good work! Please! Thanks.

@DDMGarageDoors 4 жыл бұрын

Hi Ken! Thanks for the kind words. We're glad we were able to help you save money and accomplish this task safely!

@tdirtpor 9 жыл бұрын

I'm thinking it must be garage door contractors that are giving the thumbs down. Safe and easy to understand to complete this job. thank you for posting

@DDMGarageDoors 9 жыл бұрын

tdirtpor That's what I'm guessing, Thank you for your kind words.You're welcome.

@TriCommforGod 5 жыл бұрын

Excellent step by step instructions. I had may laptop in the garage watching this video and the whole procedure took just over an hour for me and that's with me screwing up one step and having to go back. Piece of cake! Thank you!!

@DDMGarageDoors 4 жыл бұрын

Thanks for the kind words, Dodge D100! We're glad that you were able to get your door up and running again so quickly.

@walkerjw81 8 жыл бұрын

Well, well, well... it looks like my project has found me going down the rabbit hole of your videos. Well, made again! Thanks!

@DDMGarageDoors 8 жыл бұрын

+James Walker Thank you, and you're welcome. Best wishes.

@jeffreycarter3503 5 жыл бұрын

The best DIY video on torsion spring install I could find. I obsessively searched and watch a couple dozen, most were OK, none were as complete as this one, and this fellow is an EXCELLENT instructor. (I used to be in the business-to-buisiness training production). I would add two things he did not emphasize in this video: one video I found mentioned replacing the bearings at the ends, this seemed like a good idea, as long as you have it off; and in my case the installer cranked the set screws down so far the shaft was deeply indented, I wish I had know that, I would have been able to replace that. I reused the shaft, the bearings seemed ok, now have 2 new springs, maybe good for another 20 years. Thanks, with your help it went smoothly.

@DDMGarageDoors 4 жыл бұрын

Hi Jeffrey! The bearings don't necessarily need to be replaced when you replace the springs. If they are worn to the point of being able to see between the race and the bearing housing, or if they are seized up to the point of not being able to turn at all anymore, then they would need to be replaced. The shaft can usually just be filed down, and will not need to be replaced either. It's always up to the customer if they want brand new parts on their door with their brand new springs: this does make some sense, and it's absolutely up to preference as long as the old parts still function and do their jobs properly.

@obsidianrazor8184 8 жыл бұрын

This is the second time in 18 years that I have had to replace the spring. This time I was teaching my 18 year old son and wanted him to watch a video on how and your video is excellent! Thank you so much.

@DDMGarageDoors 7 жыл бұрын

Thank you for your kind words, Obsidian. It's always good to see a father and son work together. That will be much easier for your son when he needs to replace his own springs down the road. You're welcome! Best wishes.

@richardlewis1359 4 жыл бұрын

now i know what Marty Shottenheimer has been up to since he retired from the NFL. He's teaching us how to fix garage doors. Good Job Marty, Thanks

@DDMGarageDoors 4 жыл бұрын

We're glad you think so, Richard! We don't quite see the resemblance, but we're glad you found this video to be helpful!

@dr.stevebrule739 5 жыл бұрын

Can't thank the folks at ddmgaragedoors.com enough for all the help this past week with all the questions I had before replacing my own springs. Yes, doing this can be extremely dangerous if you're not careful. But all of the people online acting like you're going to die if you even attempt this are ridiculous. Just use common sense and follow these instructions word for word and you will find that this is a lot easier than what you probably thought. Thanks again guys, this video saved me $250 or more!

@DDMGarageDoors 4 жыл бұрын

Hi Dirk! Yes, safety does need to be taken into account when replacing your springs. As you said, common sense goes a long way, and taking your time and not rushing cuts down on the chance of injury as well. As we always say: safety first, then work!

@GaryRFerguson 11 жыл бұрын

Followed the video and got the springs changed without any problem. Thanks!

@mattoberlander 9 жыл бұрын

You should give classes on how to make "how to" videos. One of the best made and thorough videos I've ever seen! Thanks,

@DDMGarageDoors 9 жыл бұрын

Matt Oberlander Thank you for your lavish words.I follow a simple process: Subject - you understood, action verb predicate, with the direct object upon which the verb acts, with a few modifiers in between. The hard part is the writing, which took hundreds of hours, and which is based on over 20,000 torsion spring replacements I've done over more than 30 years.

@Joe52T 11 жыл бұрын

Outstanding video for torsion spring replacement. I followed it precisely, and successfully replaced my springs. I especially appreciate your attention to the safety aspects. Well done and thank you. Joe Tasse, Michigan, 2/8/13

@leecarr782 4 жыл бұрын

This is the best instructional video I’ve seen in any capacity. I fixed my door based on this video, with no issues at all.

@DDMGarageDoors 4 жыл бұрын

We're glad to hear that this helped you get the job done, Lee! We hope that our videos will inform, as well as helping those that are completing any of these fixes on a garage door!

@garyl29 10 жыл бұрын

I bought my new springs from you company, didn't realize you are only an hour away. I followed your instructions and it worked like a charm. I still have all my fingers :)

@DDMGarageDoors 3 жыл бұрын

We're glad to hear you came out unscathed, Gary! Thank you for your business!

@jacklauler4882 5 жыл бұрын

The absolute best video for replacing torsion springs I’ve found out there . I’m mechanical but hadn’t ever replaced torsion springs before ,everyone always tries to scare you away from it saying l, leave it to the pros .... I’ll tell ya , After simply watching this twice I was able to size up and order my pair of springs as well as a center bearing plate and replace them . The door now works perfectly again ,actually far better than before and the whole job only took about 45 minutes . Thanks for this video , you guys saved me hundreds of dollars .

@DDMGarageDoors 4 жыл бұрын

Hi Jack! We're glad that you were able to accomplish this task safely! That's the key to it all; safety. Those that say leave it to the pros are not incorrect to say so, as this is something that can be dangerous if proper safety techniques and common sense aren't used. As always: safety first, then work!

@shaunhughes5839 4 жыл бұрын

This video was incredibly helpful to me. The instructions were precise and comprehensive. I’m relatively handy with tools but I think most folk would be able to follow these instructions. You saved me at least a couple of hundred dollars in labor!

@DDMGarageDoors 4 жыл бұрын

Hi Shaun! Thanks for the kind words. We strive to make all of our instructions as well explained as possible, as well as easy to understand.

@Ozzy2004Ironman 4 жыл бұрын

Just changed my torsion springs for the first time. This video was the most thorough video on this topic. Appreciate the step by step instructions to help me change my springs safely.

@DDMGarageDoors 4 жыл бұрын

We're glad you were able to accomplish this safely, Jeff!

@lockirocu 9 жыл бұрын

Gold Standard for instructional youtube video.

@DDMGarageDoors 9 жыл бұрын

lockirocu Thank you for your lavish words!

@therealbadbob2201 4 жыл бұрын

I have not done this in 30 years, last weekend one spring broke. Thank you for the instruction. I could not remember all the steps. Very nice instruction.

@DDMGarageDoors 4 жыл бұрын

We're glad we were able to walk you through the process then, Bob! Thanks for watching, and we hope the replacement went well!

@donalta2229 4 жыл бұрын

Thank you for a detailed step-by-step instructional video. I don't usually reply to KZfaq videos. Appreciated yours enough to take the time, thanks again!

@DDMGarageDoors 4 жыл бұрын

Hi Don! We appreciate you taking the time to reply. We're glad that you found the video to be informative, and hopefully it helped you accomplish the task with ease!

@motobuilt73 4 жыл бұрын

I followed your video to the letter, and had my new springs installed and the garage door functional in no time. Thank you.

@DDMGarageDoors 4 жыл бұрын

We're glad you were able to get your door up and running again quickly, motobuild73! Thanks for watching!

@f.m.9970 4 жыл бұрын

Great video!!!!! Local shop wanted to charge me $700 to replace the springs and another $500 for a new motor!!! Watched your video, bought my own springs for $70, followed your steps exactly, and my garage door is now fully functional!! I can’t thank you enough for saving me over $1,100!!!!!

@DDMGarageDoors 4 жыл бұрын

Hi Fernando! Wow, that is a lot. The price on just the springs is way too much if they are normal garage door springs. The price for the opener is within a normal range, depending on the opener used on the door. We're glad this video was able to help this replacement go well! This is a perfect of example of doing you research; some shops will try to charge more than they should. We have a list of reputable shops on our website for people who are looking for a reputable company in their area: ddmgaragedoors.com/garage-door-repairs/

@Hometmc 4 жыл бұрын

One of the best DIY videos I've ever seen.

@DDMGarageDoors 4 жыл бұрын

Thank you for the kind words, Tim!

@MrRahimhosein 10 жыл бұрын

Why would anyone dislike this video. This guy was so detailed i will now try to change my own springs if they ever break. Great video. Thanks man.

@DDMGarageDoors 8 жыл бұрын

+RSH21 After first writing and posting the written instructions in 2005 I replaced thousands of springs and updated the script to provide more details. Your kind words are appreciated. You'r welcome.

@MrRahimhosein 8 жыл бұрын

+DDM Web Services, Inc. you did a great job with this video.

@michaelclark6172 9 жыл бұрын

I watched this video and was able to replace my spring without killing myself or tearing anything up, and it only took about an hour start to finish. Glad I found this video. It's the best one of the several I watched while waiting for my spring and winding rods to arrive. Thanks guys.

@DDMGarageDoors 9 жыл бұрын

Michael Clark Congratulations, Michael! Glad to here the job went well. Your generous comments are appreciated.

@JohnHolzer 9 жыл бұрын

Excellent instructional video on how to replace a garage door torsion spring. Saved me $200 in repair costs.

@BenDucklow 9 жыл бұрын

Damn. I'll have to remember this vid next time. Nice find.

@DDMGarageDoors 9 жыл бұрын

Ben Ducklow We're here to help when you need it.

@DDMGarageDoors 9 жыл бұрын

John Holzer Glad we could save you $200, And, congratulations! Thank you for your kind words.

@Hondo79 10 жыл бұрын

I just wanted to say thank you so very much. Your video was clear, concise and made it able for me to save over 400$ to replace my springs. In short thanks to you I DID IT!!!!

@DDMGarageDoors 4 жыл бұрын

We're glad to hear this, Joseph! Thanks for trusting us to lead you through the process safely!

@michaelschmidt7286 5 жыл бұрын

One of the best how-to videos I've ever seen. Clear verbal instructions match the visual presentation exactly. Perfect for learning how to perform a potentially dangerous repair. Thank you!

@DDMGarageDoors 4 жыл бұрын

Hi Michael! We're glad that you found our video to be helpful! Yes, this can be a dangerous repair if the necessary precautions aren't taken. As we always say: safety first, then work! Always make sure you are safe before attempting something like this!

@jonathancunningham8849 11 жыл бұрын

I want to thank you for your excellent directions. With your guidance, I was able to replace my torsion springs with no trouble at all. Thanks again!

@DDMGarageDoors 3 жыл бұрын

We're glad that you were able to get your replacement done, Jonathan! Thanks for trusting our video to take you through the process!

@LeaveItToBeanHead 10 жыл бұрын

Awesome video! Can't thank you enough. Very professional and easy to understand. Anybody watching this need not look at any other video, this one is the bomb.

@DDMGarageDoors 3 жыл бұрын

We're glad you think so, Victor! Thanks for all the kind words. Blessings!

@serouniankeir8379 4 жыл бұрын

Today I replaced my garage door springs using this video as my guide. Followed it step-by-step, and it came out perfect.Thanks.for the help.

@DDMGarageDoors 4 жыл бұрын

We're so glad to hear that this worked perfectly for you, Serounian! We're always happy to help.

@maxny1 11 жыл бұрын

Thank you for giving such a clear explanation on how to do this job it is much appreciated.

@DividendGems 9 жыл бұрын

Best how to video ever! Just replaced both springs, and didn't lose one pint of blood!

@DDMGarageDoors 9 жыл бұрын

Scott Pettigrew Thank you for your kind comments, Scott. And, congratulations! Glad to hear the job went well, and that we could help. Best wishes.

@provsoc 8 жыл бұрын

Just swapped out 2 springs and saved about $225! Easy DIY project for the mechanically inclined individual. Follow the directions exactly as spelled out in this video-extremely comprehensive. Thanks for taking the time to create a video for the weekend warrior DIY-er!

@DDMGarageDoors 7 жыл бұрын

Cody, I'm glad to hear we saved you so much money! You'welcome. Replacing springs is dangerous. Just as there are many details for driving a car, the only way to responsibly sell torsion springs is to details the steps so it can be done safely. Best wishes.

@Godchild77777 4 жыл бұрын

Hands down best all around garage door video. Thank you for all the information!

@DDMGarageDoors 4 жыл бұрын

Hi Stephen! We strive to provide the best information possible so that anyone watching is able to do the procedure safely and successfully!

@carolync6408 4 жыл бұрын

One of the best instructional videos I've ever seen on KZfaq! Thanks!

@DDMGarageDoors 4 жыл бұрын

Thank you for the kind words, Carolyn! We hope this helped you get your spring replacement taken care of without a hitch!

@jonnamurdock1176 11 жыл бұрын

This video was incredibly helpful! Thank you so much for the time you spent making it. It was filmed well and the directions were given and demonstrated well. Can't thank you enough!

@gregorystearns7500 9 жыл бұрын

awesome video!! Torsion springs is now DIY, and no longer held hostage by 24/7 service calls and the associated higher costs, and upselling. Thank you so much guys. Took me 30min with the easy to follow directions.

@DDMGarageDoors 9 жыл бұрын

Gregory Stearns Wow! The 30 minutes was fast! You're welcome, and thank you for the generous comments.

@anon4391 3 жыл бұрын

I really appreciate the warnings by the narrator about the safe practices! Really helpful video! I learned so much. I had two and and one snapped. So I just had them both replaced by a contractor. He didn't stretch the coil 1/8" like you guys did. My left side is not closing flush to the floor. I am planning to stretch the coil 1/8" like you illustrated in the video. - Henry, Aurora, CO

@DDMGarageDoors 3 жыл бұрын

Hi a non! We're glad to hear that this video was helpful to you! We hope that you are able to get your door to lower to the floor. Sometimes this stretch is what makes the difference in whether the springs lift the weight they are supposed to. You may also want to check out our video on how to level a garage door, as this may be the actual problem; kzfaq.info/get/bejne/b59doMWGvZ7Reqs.html

@vanontom 3 жыл бұрын

@@DDMGarageDoors Thanks DDM for explaining exactly why this step exists (stretching spring after winding, see 13:20), and ANON for the question. That was my biggest question so far, as I've seen most others with videos omit this step, or even comment on why it is unnecessary or dangerous. What's the worst that could happen if a person does not do this step?

@DDMGarageDoors 3 жыл бұрын

@@vanontom Hi Thomas! That's a good question to wonder. For one, if you do not stretch the springs out, the door may have a difficult time closing all the way, and you may have a gap on the bottom. This is because the shaft moves slightly as the door operates, but enough that if you don't stretch the springs, the coils will likely bind on each other, and cause the door to not be able to close all the way.

@truckercamera 10 жыл бұрын

You answered the questions I needed to know to do the job correctly. Your video is better than most of the others and answers the questions in a manner that allows easy understanding. It is appreciated. I prefer to do things myself and am a good listener. So your video helped me.

@DDMGarageDoors 4 жыл бұрын

Thank you for the kind words, truckercamera! We hope that this helped you replace your springs properly and safely! Thanks for watching.

@davekush3171 5 жыл бұрын

I just followed these steps exactly, pausing the video as I went, and replaced my door spring without issue. Door working fine now. Thank you.

@DDMGarageDoors 4 жыл бұрын

We're glad the replacement went well, Dave, and that you got the door working again!

@marklemere5991 8 жыл бұрын

I have watched many youtube videos, on many different things. this is THE BEST one i have ever seen. Many safety points made and remade, witch is a good thing, because many people don't always think ahead. I am a union sheet metal worker and believe in safety and being a true craftsman, and you sir are a TRUE CRAFTSMAN of your trade!!!! Great video!!!!

@DDMGarageDoors 8 жыл бұрын

+Mark LeMere Your generous words and those of many others encourage me to keep pumping about a third of our profits back into developing our site to help our customers find the parts they need and to know how to install them when they arrive at their homes or places of business. Your kind words are most appreciated. Best wishes!

@MarioDConti 10 жыл бұрын

I've rarely seen such a perfect video on youTube. It's down to the slightest detail and it's never boring. Great job and ... thank you.

@DDMGarageDoors 4 жыл бұрын

We're glad you found it interesting, Mario! We hope that this also helped to inform how to complete this replacement successfully and safely! Thanks for the kind words.

@raftdaddy 11 жыл бұрын

Excellent. I've checked out several "how to" videos for adjusting my spring tensions and this is by far the most clearly explained. Thank you!

@God-of-our-own-understanding 11 жыл бұрын

This was a VERY helpful video. I got a replacement door through a Craigslist purchase and used this wonderfully detailed video to swap it out! Thank you!

@davidwalker1130 4 жыл бұрын

Best DIY instructional video I have ever seen.

@DDMGarageDoors 4 жыл бұрын

Thanks for the kind words, David!

@EliezerBadillo 11 жыл бұрын

Thank you for your video! I just saved over $200 by doing the job myself. Your video was very detailed and to the point. Once again, thanks!

@coryroberts5225 3 жыл бұрын

My torsion spring broke over the weekend. I ordered the parts on Monday morning. DDM made the part and I picked it up one hour later and had it installed after lunch by watching this video and following the steps. However, I had to add a few quarter turns for an 8ft door vs. the 7ft door height. Thanks for the great service!

@DDMGarageDoors 3 жыл бұрын

Hi Cory, thank you for your business! We're glad that you were able to get your springs replaced so quickly! We're always happy to help!

@jeffreygoodson2563 5 жыл бұрын

My garage door torsion springs needed to be replaced. They no longer provided adequate force to allow the garage door to open and close. (The door had a lot of weight when lifting it up) Rather than tightening the existing (old) torsion springs I purchase new ones as well as the torsion spring bars. I asked about 12 people from work if they have every replaced their torsion springs. All of them sad “No, this is very dangerous and you should have a professional do it”. I was very apprehensive about doing this myself due to the dangers involved. This afternoon my wife and I replaced our garage door torsion springs. We followed your video and had no problems at all. Thank You so much!

@DDMGarageDoors 4 жыл бұрын

We're glad this video helped, Jeffrey! Your coworkers aren't wrong though: this is a dangerous task if safety precautions are not taken. Also, if you ever add weight to your door through reinforcements, insulation, or something else, you cannot just tighten up the old springs. The weight of your door has changed, so you will need new springs that will properly lift that weight.

@MrSoccernut43 9 жыл бұрын

I consider myself very mechanically inclined. Changed a door spring on my garage door awhile ago. Recently an original one (20+ plus years old) broke. Watched this video. Never realized the little things I missed (stretching the spring, oiling the springs, etc.). One of the best DIY videos I've seen. No BS. Safety points included. Great job.

@DDMGarageDoors 9 жыл бұрын

Michael Frick Replacing garage door torsion springs involves a lot of details as you could see. Thank you for your kind words.

@alreinike 9 жыл бұрын

These videos have taught me a lot. Even being mechanically inclined, garage door springs were still intimidating enough to where this feat wouldn't be possible without these videos. I didn't realize, the doors on my house were never balanced right. The door never stayed in place half way up. My thinking is that because of the addition bracing required in S. Florida for strength, perhaps they were balanced before the added weight. Regardless, your videos, the right tools and a 1/2 turn later on both springs, my garage door opens perfectly. Your attention to safety is top notch and is something that cannot be overlooked when working with these doors. Kudos!

@DDMGarageDoors 9 жыл бұрын

alreinike Congratulations. Glad you were able to study your door and to figure out the solution for the problem. Your kind words are appreciated.

@richlampman1332 5 жыл бұрын

Just installed Torsion Springs for the first time. Owned many homes but have never had to. Thanks to your video and excellent teaching steps it went without a hitch and in perfect time too we are having a large scale winter storm and I needed to get my snowblower out eating some snow. Thanks!

@DDMGarageDoors 4 жыл бұрын

Thank you for watching, Rich! We're glad to hear that the install went well, and hopefully you were able to get your snowblower out to tackle the snow!

@kyaba1 4 жыл бұрын

Thank you Mr. Musick, you are a very thorough and clear teacher and calm demeanor inspires confidence to tackle and otherwise daunting task.

@DDMGarageDoors 4 жыл бұрын

Thank you for your kind words, Barney! This can definitely seem like a daunting task. If you take the proper safety precautions, however, this tasks proves much easier to accomplish than it might initially seem. Safety first, then work!