How to Replace Headlight 2003-2009 Toyota 4Runner

Рет қаралды 30,622

2 жыл бұрын

Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ib/1ALHL02881
This video shows you how to install new, quality, TRQ headlight assemblies on your 2003-2009 Toyota 4Runner. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oeG/1AXAA00013
• 10mm Socket 1aau.to/odP/1AXAA00017
Subscribe: / @trq
Check out our playlist:
Toyota 4Runner 2002-2009 4th Gen: • Toyota 4Runner 2002-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 10

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@OperationNorthwoods Жыл бұрын

I didn't think that removing the front bumper was necessary to replace the headlight lens.

@jameyvillanueva6521 Жыл бұрын

Removed the front bumper?

@lIlIllll1 11 ай бұрын

Why remove the front bumper???

@bonjovi2757 2 ай бұрын

In this episode we disassemble the entire 4 runner to change the oil. Once the engine is removed, you can easily get to the oil pan bolts. After you remove the oil pan to can check the bearings and give them a wipe down. Once the engine is back in and the oil pan installed, reassemble the truck and drain the oil. Don't forget the filter. Should only take 8-12 hours depending on tools and skill.

@1bizjets 3 ай бұрын

What to do with a red and black wires coming out the back, which are not showing in your video!!?

@1985collado 4 ай бұрын

I just replaced my 06 and definitely did not remove the bumper lol😂

@JQUICK21 5 ай бұрын

LOL you had some help with LADY LUCK it seems....because when you picked the bumper up to put it back on you only had to stand in the middle and set it up on and in place and that was it.....Wow!.....you never had to go to the sides and push them/clip them into place....bet you can't do that again.....