How to Replace Headlight, High Beam, & Blinker Bulbs BMW 328i 2007-2011

How to Replace Headlight, High Beam, & Blinker Bulbs BMW 328i 2007-2011 | EASY!

Рет қаралды 115,496

Жыл бұрын

Today I show you exactly how to replace the headlight, high beam, and blinker bulbs for a 2007-2011 #bmw #328i This is a fairly easy maintenance item and something you could totally do in your garage at home, saving you all kinds of money!
Headlight Bulbs and High Beams (Same bulbs just flipped around): amzn.to/3dlcv93
Blinker: www.rockauto.com/en/moreinfo....
Instagram: / ryansgarage408
If you have a car question ask it completely free at www.2carpros.com/questions/new
*Disclaimer: Please use all safety precautions

Пікірлер: 112

@ectumanut49 10 ай бұрын

Thanks for demonstrating a detailed method of replacing headlight bulb/s on a BMW 328i with a awesome video.Saved me a lot of money.

@SolusAstra 2 ай бұрын

I wish I had this guy as a life mentor the way he simplifies things 💀

@ShaneShandeh-eg7ee 4 ай бұрын

I have seen two of his videos, one on replacing the window regulator and this video. He is passionate about what he does. Thank you 👍

@rayng3014 Жыл бұрын

Awesome spot on video. Thank you for the detailed instructions and high quality video even showing how the retainer clips are latched. After viewing your video I was able to do it from the top side mostly by feel. Although I couldn't see what I was doing, I was able to visualize it in my head based on your video and did both sides of the low beam bulbs by feel. Thanks again.

@alexlim1077 6 ай бұрын

if you're taking out the fender liner note that theres at least 3-4 more bolts underneath on the bumper that you need to take off for the fender to come out. i cracked my bumper by pulling too hard on the fender liner thinking i had all the bolts off. real pain in the ass

@Radjammin 9 ай бұрын

Great video, but high beams were actually easier from above. I agree to do low beams from the tire panel.

@2carpros 9 ай бұрын

Good tip! Thanks for watching!

@RobertStAmant 8 ай бұрын

Thanks for the detailed instructions! I followed them to the letter. Couldn't ask for better.

@2carpros 8 ай бұрын

Awesome! Thanks for watching!

@shankil2975 Жыл бұрын

Hi Excellent video. I am looking to change the Daytime running Lamps (Angel Eye). Is that located below the headlights? The second one you replaced? Thanks

@richardhardy8621 Жыл бұрын

Awesome video guide for this repair! Thanks

@outsidethelines2162 Жыл бұрын

Such great camera work! Thanks for sharing!

@2carpros Жыл бұрын

Thanks for watching!

@petergalan6945 Жыл бұрын

good video of replacement head bulb and high beam bulb .

@manifestmillionz6954 Жыл бұрын

Awesome video man thanks 🙏🏼

@jasonlin2959 Жыл бұрын

You are mush better than everyone else,to show every step.very helpful.

@2carpros Жыл бұрын

That's so nice of you! Thanks for watching!

@iekikanikole 5 ай бұрын

Thank you so much! Going to attempt this tomorrow, but the link for the bulbs is no longer available so I'll just be picking up a H7 55watt bulb. I'm pretty sure that's the right one.

@skylarhagen5416 Жыл бұрын

you made this really easy man, thanks for the tut

@2carpros Жыл бұрын

Glad to hear that!

@josefonseca5295 Жыл бұрын

Thank you your video still helping people

@2carpros Жыл бұрын

Glad to hear it!

@abdelkrimnadar2493 Жыл бұрын

Great tutorial video! Thanks

@2carpros Жыл бұрын

You're welcome!

@kirkkirkham7538 6 ай бұрын

Great, detailed video!

@2carpros 6 ай бұрын

Thank you!

@artdealba8362 11 ай бұрын

Exelelt video thank you so much you save me a lot of money

@2carpros 11 ай бұрын

Love to hear it! Thanks for watching!

@stancuflorin Ай бұрын

great video

@tuandinh4466 6 сағат бұрын

Thank you Very Helpful!

@robpenna3994 Жыл бұрын

Thanks!

@GregPentecost Жыл бұрын

What is the part # for the turn signal cap/socket? The thing with the metal tangs on the side.

@Alberto-qy2rs Жыл бұрын

Hey on the first bulb you remove, there was another component that looks like it What is that?! I need to swap it out for a headlight assembly I bought Thank you for the video!

@shane4388 4 ай бұрын

loved this so much effort 10/10\

@2carpros 4 ай бұрын

Glad you liked it!! Thanks for watching!

@vladimirvasco440 5 ай бұрын

You-re rock!✔✔🚘🚘

@victsol 10 ай бұрын

Thanks for the video 👍🏼 but I was wondering, what’s going on with the halo light (angel eye) light bulb replacement?

@libertybad 9 ай бұрын

If you have Valeo, unscrew and unbend stamp metal sheet thing that holds little glas in front of a bulb and simply push a bulb in and twist, get a new one there with same metod and put everything back together.

@johnrongavilla5711 Жыл бұрын

This might seem like a dumb question, but is it the same for the 2011 BMW 5 series?

@desertcamel3573 Жыл бұрын

btw 2016 328i do you buy fixture of bulb for running day time light

@toonmag50 8 ай бұрын

Haynes manual states that the main (high) beam bulb covers can be accessed from above via the engine bay .

@2carpros 8 ай бұрын

I couldn't. Thanks for watching!

@Archer1930 10 ай бұрын

Thank you Soo much

@2carpros 10 ай бұрын

You're welcome!

@justmylife4421 8 ай бұрын

Wish mines had that little access panel. It’s a solid fender liner

@2carpros 8 ай бұрын

Same year?

@gabe9932 Ай бұрын

@@2carprose92 has solid fender liner

@anthonyhernandez1765 8 ай бұрын

Which one is the daytime running light?

@jaymilo8425 Жыл бұрын

I have a 2011 328i convertible and my lights are not like that at all I have been looking for weeks to find a video on replacement of angel eyes cuz I can even find the damn bumbs

@sandblastingoconnor Жыл бұрын

2011 Park light right hand side park light how do you replace it 🤔

@sammydeluxe420 3 ай бұрын

Hello sir can you please tell me I want to change my headlight lamp but I don’t know which one is BMW 318i model 2011 is h7 or h8

@matteo29843 Жыл бұрын

Where is halo bulb located?

@AndrewPerry-db5ys 4 ай бұрын

How do you do the fog light?

@MrSuperRmat 5 ай бұрын

Great video , My 2010 bmw 328i does not have access through the wheel well. Any ideas on how I’m suppose to change my bulbs ?

@guilhermeazevedo9008 5 ай бұрын

Taking the front bumper off so u can take the headlights off

@PottetoChip 4 ай бұрын

the link to the parts are no longer available, are there updated links I can use?

@rmimiaga Жыл бұрын

My 328i xDrive has a daylight running headlight (in addition to the halo lights). Any idea how to change that bulb? (inner most headlight) thank you!

@EverydayPhotographer 8 ай бұрын

Did you figure it out? I Have the same question

@bfprecords 3 ай бұрын

This video doesn't mention the parking light. How are those removed?

@2carpros 3 ай бұрын

The same way.

@HomeGrownMedia 9 ай бұрын

If I was taking my wheels off on a 2011 3 series 18inch rims what would i torque them back to?

@HomeGrownMedia 9 ай бұрын

also just do the high beams from the top and take the airbox out

@lisas6056 Жыл бұрын

Are there LED replacement bulbs for the H7 headlight?

@2carpros Жыл бұрын

Yeah probably. I just have to recommend the stock ones. Thanks for watching!

@gabe9932 Ай бұрын

Just an fyi. E92 you have to take off the fender liner

@2carpros Ай бұрын

It's not a bad idea to do anyways. Thanks for watching!

@tombuscher6109 Жыл бұрын

I have a 2007 328xi. It does not have a access panel. So I am assuming they take out the inner fender liner. No one on KZfaq has addressed what to do with no access panel

@2carpros Жыл бұрын

Yeah take it out like I did. Thanks for watching!

@robinkirkland3252 Жыл бұрын

@@2carpros can you remove the fender cover without removing the wheel?

@robdelacruz945 Жыл бұрын

Mines don’t have the under panel by the wheel , I have a 2009 bmw 328i xdrive

@johnsommers9201 Жыл бұрын

Take the fender liner out just like he did in the video🤙🏾

@kindallstewart2825 Жыл бұрын

How do you change the parking lights?

@tonyacaudillo7943 9 ай бұрын

Would all this be the same for a 2012 BMW 328i coupe?

@2carpros 9 ай бұрын

I assume so. Thanks for watching!

@leopadh 10 ай бұрын

I think my 328i has the same config looks like. The bdi scanner says I have a a bad left high beam and a bad left daytime bulb. I found a burnt high beam but I can’t seem to find any other burnt one. I’m having a hard time to locate the daytime bulb.

@2carpros 10 ай бұрын

They might be the same bulb with two filaments in them. So one bad bulb and 2 bad codes. Thanks for watching!

@leopadh 10 ай бұрын

@@2carpros that’s it, 1 bulb 2 codes

@stout8529 5 ай бұрын

Well, can you actually replace the high beam through the access panel? Looks like there is not enough room for that.

@2carpros 5 ай бұрын

People have told me they can but the way I did it seems better. Thanks for watching!

@cesarabelbs5548 11 ай бұрын

It’s the same for 325i 2011?

@2carpros 11 ай бұрын

Yeah should be. Thanks for watching!

@adubrempong4531 Жыл бұрын

Talent, KWABENA, 98

@ericquinonez5221 4 ай бұрын

my 2008 335i headlamp assembly looks nothing llike this

@notgabrielconley1641 Жыл бұрын

How do I get the sensor out?

@jhonghanem6947 Ай бұрын

Go to the hill BMW bad bad

@dlonra65 8 ай бұрын

Super easy my ass--the headlight replacement is difficult as hell and the engineering makes no sense. Why the hell should you even have to access the panel by going underneath with the tire in the way? But thanks for at least showing this...still helped a lot

@2carpros 8 ай бұрын

That's BMW is general. A little more difficult than needs be. Thanks for watching!

@gannonruby1119 Жыл бұрын

Could’ve cut the turn signal part out, bmw drivers don’t use those anyways

@2carpros Жыл бұрын

Haha but I want the option to be there for them. Thanks for watching!

@DCAZMERE 7 ай бұрын

Impossible to access high beam from under without removing the inner fender....PERIOD

@raydenbartley 2 ай бұрын

Yeah Its impossible depending on what trim you have. When I had mine I had to open the hood and take off the bumper… some are just right under the wheel with the low beams

@madrabbit9007 Жыл бұрын

This is why I'll never own a German car, they over engineer and over think EVERYTHING! What a bloody mess.

@2carpros Жыл бұрын

I don't blame you! These things can be a pain! But we always get it done! Thanks for watching!

@I_Ali_I Жыл бұрын

I mean it’s annoying but not really that hard tbh, I swapped my headlights from the trash 06 halogens to the 09 halogens u see in this video, but instead of using halogen blubs I retrofitted LEDs and HID lights. Then I had to code the bulb monitoring system out of the car to prevent flickering. Again annoying but not hard at all. Just gotta go the extra mile and everything will go smoothly and work for years to come. They’re actually designed pretty decent and I think n52 cars aren’t the worst to work on.

@madrabbit9007 Жыл бұрын

@@I_Ali_I compared to my 04 Avalanche its like landing on the moon. Chevy had the perfect style of headlight that could be changed in seconds. Like I said….Germans over think and over engineer everything.

@handsoff757 Жыл бұрын

🤣🤣🤣

@GregPentecost Жыл бұрын

The difference: a Chevy car will be ready for scrap in 6 years; a 10y/o BMW often is like brand new. Yes, my family has owned many over the years. This however does not apply to Chevy/GMC trucks. If they built their cars like they built their trucks they’d still be #1 worldwide in cars.