How to Replace Headlights 2007-2011 Toyota Camry

Рет қаралды 24,815

7 ай бұрын

Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ia/1ALHL01461
This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2011 Toyota Camry. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obwL/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obwL/1AXAA00013
• 10mm Socket 1aau.to/obr3/1AXAA00017
• 21mm Socket 1aau.to/oatV/1AXAA00043
• Trim Tool Set 1aau.to/oamu/1AXXX00006
• 1/2 Inch Impact Gun 1aau.to/owv/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obR4/1AXAA00016
• Torque Wrench 1aau.to/oaVx/1AXAA00044
• Gloves 1aau.to/oaBN/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oajG/1AXAA00068
• Jack Stands 1aau.to/o7M/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 17

@TRQ 7 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@daltonseay4544 2 ай бұрын

You don’t have to completely take the bumper off or wheels off. You just turn the wheels side to side to get the screws in the fender well then take out the top screws from the bumper and let it hang down on the ground. From there you can access the entire headlight assembly. Save you about 30 min

@markmulich4421 3 ай бұрын

I was going to just buy new headlight assemblies instead of using the Sylvania Restoration Kit for fogged lights. After watching this video, I'm definitely not doing all that work to replace the headlight assemblies. Restoration Kit it is. Thanks for a good video, though.

@deanzona6503 2 ай бұрын

You don't have to remove the engine?

@4xrru 5 ай бұрын

Why did the wheels have to be removed? Seemed like you still had lots of room

@dga5396 7 ай бұрын

You unlocked the light bulbs by turning the counter clockwise not the the right. Thanks for the video.

@dga5396 7 ай бұрын

You tooks the lamps out by turning them to the left not right, or counter clockwise. Good video over all.

@joshuajakob598 4 ай бұрын

Thanks for the video. This helped me with the process. My 2009 Camry with 370k; the center bolt stripped in half when I used the 10mm socket and ratchet on it and the bottom half is still stuck. My two screws on the side with the rubber covers would not come out with my Phillips head screw driver, actually my screw driver broke when trying to turn them. WD-40 did not help at first. I was about to try a 15mm round off socket but my neighbor was able to get them turning with some vice grips.