How to Replace Headlights 07-09 Toyota Camry

Рет қаралды 113,859

1A Auto: Repair Tips & Secrets Only Mechanics Know

6 жыл бұрын

Buy Now!
New Headlight from 1AAuto.com 1aau.to/ia/1ALHP00615
1A Auto shows you how to repair, install, fix, change or replace broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 07, 08, 09, Toyota, Camry.
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/ttt/1AXAA00013
• 10mm Socket 1aau.to/tLk/1AXAA00017
• Ratchet 1aau.to/tS5/1AXAA00016
• Painter's Tape
For More Info visit us at 1aau.to/h/aPP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 63

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@jus1taj 8 ай бұрын

Seriously guys thank you so much. This is the same model of car I have and I’m about to change the headlights. Your videos are so thorough and easy to follow. I am new to DYI car stuff and you all make it seem possible. Thank you!

@kayschwartz4410 Жыл бұрын

Love my 09 camry but having to take the entire front of the car apart to change a headlight is just oxymoron. Ridiculous! What happened to simply opening the hood and popping the light out and replacing.???

@Paul1PA 6 жыл бұрын

Just installed new headlight assemblies in a 2009 Camry. This video proved very beneficial in successfully completing the job - THANKS!!

@1AAuto 6 жыл бұрын

+Paul1PA Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@TDZone70 2 жыл бұрын

Great tutorial!! He went through each step thoroughly so you can follow along. I did not remove the lower splash guards. I don't think this step is necessary and it makes more work for you.

@ziek84 3 жыл бұрын

Easy but sooooo many screws to just replace the headlights haha.

@clpnetwork522 3 жыл бұрын

Exactly! They don't make anything easier these days!!😆😆

@georgeeaklor3442 6 жыл бұрын

Nice vid, like the way you explained how to adjust the headlight height. Also can hear you clearly.

@edieken7 Жыл бұрын

I like all your videos but I remember when I bought a headlite for $ 1.50 and changed it in five minutes . Whats this world comming to.

@nicholaslozano3414 Жыл бұрын

This video was so helpful! completely installed the headlights by myself without any issues!

@DeanBallweg 5 ай бұрын

I did this yesterday in my driveway, with just a couple of ramps to elevate the front a bit. These instructions were incredibly helpful and 100% accurate. It went incredibly smoothly, and even though I was delayed a bit by one of the top bolts when the philips head stripped out, and a half hour round trip to the nearest auto parts store to get a pair of turn signal bulbs and side marker bulbs (both of which can't be changed without going through this whole process and 3 of the 4 were burned out for me), I was still able to do the job in a bit less than 2 hours. The instructions for aligning the headlights were also very helpful and only took about another 10 minutes, once it was sufficiently dark out. Thanks for the great video!

@1AAuto 5 ай бұрын

+@DeanBallweg Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@ghosttube6525 5 жыл бұрын

Don't know why vehicle manufacturers require you to disassemble the entirety of the front end to change a headlight. Stupidity

@robguerr1988 5 жыл бұрын

You can't get one of the inside bolts to remove the headlight without removing the bumper

@sjaflix 5 жыл бұрын

Not all manufacturers require removal of the front bumper for full access to the headlights. I know my 2009 Hyundai Sonata headlight assemblies can be easily removed.

@2tooful 5 жыл бұрын

robguerr1988 it’s stupid, I had a 2001 Town car cartier that you could remove the headlights without removing the bumper

@roadracer517 3 жыл бұрын

I just finished. I only removed the top and the bolt and clips and bolt at the fender.

@seanwilson5516 3 жыл бұрын

It was stupidity to me until I realized that if it was not like this, you'd be buying new headlights daily.

@robmut1357 5 жыл бұрын

On the plastic rivets, you just push in the center pin and then pull the whole rivet out. To put back, just pop the center pin up, insert the rivet and then push the pin flush. Super easy and commonly used on motorcycles.

@1AAuto 5 жыл бұрын

+Rob Mut Thanks for the tip! 1aauto.com

@mariojimilinares 10 ай бұрын

You read my mind!

@MatthewWatches 29 күн бұрын

Some people seem to think that you have to do this to change the bulbs, you don't. This is only if you're trying to replace the headlight assembly, due to cracks or discoloration of the lens.

@joerosburns5639 Жыл бұрын

Thank you very much for a clear explanation and a very well photographed video!

@AyoCoat 3 жыл бұрын

I guess I’ll leave it for the mechanic 👨‍🔧 thanks 😊 great video tho.

@Lowen264 5 ай бұрын

Thanks for the video. I can see that this is going to steal my Saturday from me. So im doing that next weekend. I'm glad my ranger was an easy job and only took a couple hours. The other car I have to do this to is my brother's 01 explorer and maybe an 04 F150.

@1AAuto 5 ай бұрын

+@Lowen264 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@paulstaf 4 жыл бұрын

Great video... I did mine in 30 minutes! I did put it on ramps to get at the bottom bolts easier, but it wouldn't have made much of a difference in time if I hadn't.

@1AAuto 4 жыл бұрын

+Paul Stafford Thanks for checking us out! 1AAuto.com

@mariojimilinares 10 ай бұрын

Thanks for taking the time to make the video, very instructive!

@kendalllee6508 Жыл бұрын

Thank you for the very detailed video. It helped me out.

@joshuajakob598 4 ай бұрын

Thanks for the video. This helped me with the process. My 2009 Camry with 370k; the center bolt stripped in half when I used the 10mm socket and ratchet on it and the bottom half is still stuck. My two screws on the side with the rubber covers would not come out with my Phillips head screw driver, actually my screw driver broke when trying to turn them. WD-40 did not help at first. I was about to try a 15mm round off socket but my neighbor was able to get them turning with some vice grips.

@1AAuto 4 ай бұрын

+@joshuajakob598 Thanks for the feedback!

@teyimjoe 5 жыл бұрын

could you please do one for how to replace headlight assembly for 2009 Lexus ES350

@ericmitchell9087 Жыл бұрын

What do you do if the adjuster doesn't move the light beam?

@RenWater 5 жыл бұрын

Excellent video, thank you!!

@1AAuto 5 жыл бұрын

+SGL Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@josevasquez8180 4 жыл бұрын

Muy bueno,pensé que sería más fácil,y es muy trabajoso,pero hay que hacerlo,gracias.

@1AAuto 4 жыл бұрын

+José Vasquez Thanks for checking us out! 1AAuto.com

@johnt9186 2 жыл бұрын

Great video.Thorough and efficient.

@1AAuto 2 жыл бұрын

+John T Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@raulb.amaral3575 3 жыл бұрын

which socket of the high beam and low beam?

@venxamalu Жыл бұрын

my camey has like a fender thingy , so i cant just snap it off . its like a bumper lining

@bigupstravel 2 жыл бұрын

What are the best brightest bulbs for headlights on 2009 toyota camry hybrid? Very difficult to see at night

@darkboy1759 2 жыл бұрын

You probably have burned projector bowls and need to replace the entire assemblies. The heat from the halogen bulb burns off the chrome inside the projectors and ruins them.

@bryanmilne 3 жыл бұрын

Do you have a video on how to remove those bolts (screw with rubber cap @3:43) holding the bumper in if the rust penetrant doesn't work?

@bryanmilne 3 жыл бұрын

How long does it take for the rust penetrant to begin to work?

@din-kin 3 жыл бұрын

mine are rusted and stripped i tried to drill them out but it didn't work so i don't know what to do because now i can't use a screw 🪛 driver

@mi5veezee Жыл бұрын

THX BRO!

@tungngo2817 2 жыл бұрын

A lot of works for me and I can’t do anything about that.

@patriciafonseca3466 4 жыл бұрын

How can i remove rusted and wasted screws? I have tried everything and they wont budge

@din-kin 3 жыл бұрын

me too mine are rusted and stripped so i tried to drill them out

@zodiacfaze8267 6 жыл бұрын

You don't have to remove the splash guard fully, just a waste of time

@Saphirah22 5 жыл бұрын

Agreed, I just removed the front bolts hooking it into the bumper itself. Other than that this video was super helpful! Thanks! :-)

@zodiacfaze8267 6 жыл бұрын

Its not a 194 bulb its a 158.

@alalnajjar2187 15 күн бұрын

they are often confused you are right. 158/168/193 look similar but have different specs especially in watts. There is a slight difference between 168 and 194 bulbs in their wattage. The first one has a power rating of 4.9 watts, whereas the latter has 3.8. The 194 is best for applications where constand lighting is needed like trunk ares..etc.