How To Replace Headlights 2010-2015 Toyota Prius

Рет қаралды 91,833

2 жыл бұрын

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALHP01063
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2010-2015 Toyota Prius.
This process should be similar on the following vehicles:
2010 Toyota Prius
2011 Toyota Prius
2012 Toyota Prius
2013 Toyota Prius
2014 Toyota Prius
2015 Toyota Prius
Tools you will need:
• Phillips Head Screwdriver 1aau.to/osb/1AXAA00013
• Pocket Screwdriver
• 10mm Socket 1aau.to/opp/1AXAA00017
• Trim Tool Set 1aau.to/ofA/1AXXX00006
• Needle nose pliers 1aau.to/ocM/1AXAA00051
• Needle nose pliers 1aau.to/ocM/1AXAA00052
• Socket Driver
Subscribe: / @trq
Check out our playlist:
2010-2015 Toyota Prius: • 2010-2015 Toyota Prius
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 55

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@billybbob18 9 ай бұрын

I was freaking out thinking this was the procedure for changing the BULB. This is for the entire assembly thank God.

@thrasher3222 6 ай бұрын

Good stuff man, I changed both headlight asemblies in my 2012 prius no problem. One thing I would say is that complete removal of the front shroud is unnecessary, I just loosened it up so it would hang and the rest was cake. Couldn't have done this without you, thanks!

@WolfMotherof2 Жыл бұрын

Okay, so now I'm sure that I will not be doing this myself now! Daddy taught me well, but Daddy also said I am worthy of paying someone to do this for me 😁😂. Thanks for the video!

@user-fi3ts1rx2t 4 ай бұрын

Just did the work on my 2013 Prius after watching this video. Worked great! Make sure you have spare clips since the old ones get very brittle and break easily.

@wgtetz Жыл бұрын

Okay - so now I know why I pay my mechanic 160 bucks to do this. No, I will not be trying this at home.

@SindeliaisSin 7 ай бұрын

My husband and I were able to do this Thanx to your video! Awesome! Thanx!

@MrBababuwi Жыл бұрын

You just saved me and others an exuberant amount of money. Thank you

@glithmasterpro Ай бұрын

cheers for the video. was very helpful for me to visualise what the disassembly entails

@EB-qq6kl 2 жыл бұрын

Thanks for this video. Well-done and exactly what I needed.

@kotash2 Жыл бұрын

thank you for making this video. I have a prius thats in perfectly good shape but the lights have yellowed and clouded up from UV damage, I had a detailing body company restor them and install better HD bulbs but they still are not a as clear and bright as they should be so I might replace the whole assemblies

@livelikeitslegal 7 ай бұрын

Thank you for such a great tutorial! Watched a handful of times. Easy to follow along as you're DIY'ing. Had no issues during install, even planned ahead with a pack of new clips and replaced all the missing and broken. 😸🥳

@TRQ 7 ай бұрын

+@livelikeitslegal Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@brenda44414 5 ай бұрын

This is a fantastic video. It just showed me why I would rather put in a few hours O/T doing something I already know and have everything I need already

@stevogman3054 10 ай бұрын

Very thorough and concise tutorial!! Bravo! New subscriber.

@Exit79 7 ай бұрын

Thank you sir. It will definitely be a much easier job for me since I now know where all the magic access bolts and clips are.

@travelovers7936 Жыл бұрын

Thank you so much! Super helpful!

@ChickensAndGardening 7 ай бұрын

Thanks for video. Wow, that's a lot of steps. I wish manufacturers would make the headlamps a little easier to replace.

@danielhill1302 5 ай бұрын

Excellent video, thank you for sharing.

@GRaw007 Жыл бұрын

Thanks for your help mate

@herbbot8241 5 ай бұрын

I replaced both the rear tail light assemblies myself and was thinking of doing the headlights next...no way too complicated lol

@henriknazarian4899 2 жыл бұрын

Thanks for this!

@TRQ 2 жыл бұрын

+Henrik Nazarian Thanks for watching our video! 1aau.to/m/Shop-TRQ

@noorielaboab1032 5 ай бұрын

Very well done - Good jobs- I can do buy my self. My only problem is if I broken the plastic retainer and the light alignment is problematic because I don’t now de correct position. I will prefer to paying-Thanks for the video

@andriusvosylius2477 5 ай бұрын

Thank you so much bro💪

@PERRA3 11 ай бұрын

thank you so much

@musclesmouse Жыл бұрын

will be doing this soon

@nickz8629 Күн бұрын

** just after reconnecting the wires for the new headlight .... Check to be sure they are working ! Don't finish reassembly just to find the connecting isn't 100% in, and then have to undo the assembly work again !

@TRQ 23 сағат бұрын

+@nickz8629 Thanks for the feedback! 1aau.to/m/Shop-TRQ

@LindaEckertBallard Жыл бұрын

It is really a shame for the replacement of a headlight would require this much body removal ... etc ... The clip providing power to my headlights is broken causing the headlight malfunction Warning to come on. I can see the plastic clip but not sure how to unplug it - very tight quarters and IMHO should not be so hard 😢 One side of the plastic plug clip is loose but not loose enough to unplug completely. I just don't want to cause more damage. The car was in an accident 10/2021 and that left headlight was cracked and replaced. I am pretty sure they did not replace the harness since I am now having this problem. Just watching the trouble a tech has to go through to get to these parts brings tears to my eyes. Things do not have to be this difficult! Seems to me the "Engineers" who design these vehicles never consider maintenance ... God Bless

@victorhuffman5068 6 ай бұрын

Notes to everyone doing this; there is no left/right beam adjustment, also from 2010 to 2014 there was a manufacture's defect NOT RECALL, headlights prematurely burning out, there is a update part to prevent this

@radium22000 Жыл бұрын

Thanks

@adobotravels Жыл бұрын

9:21 my bumper looks like that after accidentally hitting a curb, should I be worried? Please help Will it crack the headlights?

@iamtheeggman0036 9 ай бұрын

You had me at 18mm socket, I am happily letting Toyota replace ours :)

@TRQ 9 ай бұрын

+Iamtheeggman00 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@jairdanmedina6270 8 ай бұрын

does the Prius headlight assembly have an adjustor?

@sayedmohammad8419 3 ай бұрын

Can I do it without opening all bumper?

@nickadams7366 Жыл бұрын

A video about headlight literally showed me how to put this front end together (not a bodyman working on a side project to paint) 😂😂

@gemcutter187 2 күн бұрын

That looks like such a P.I.A. with all those clips & bolts etc. At 4 minutes in, I was like, "F this." I think wait until one of my "fog lights" driving lights burns out, then I'll change them both, burn headlight assemblies, and might as well upgrade the horn while the whole front end is off and add a LED light bar behind the grill or somewhere in there 😂

@cooperclay5125 Жыл бұрын

Wow. That is waaaaaay to much work

@slappadabass3290 2 жыл бұрын

Why did you need to pull the vehicle up to the wall?

@LindaEckertBallard Жыл бұрын

to calibrate the angle of the headlights ... he gives directions based on 25 feet from the wall (screen showing the beams)

@Lifeisgood4meandyou2 9 ай бұрын

Oh my GOD!! Are you serious? Just cram your hand in there and BOOM...it's done. I suggest anyone watching this to check out other KZfaq videos.

@Martin-cn7bw 10 ай бұрын

Thanks for the video! I just swapped mine on a 2009 right hand drive. For that one (and probably for most other European spec ones) you'll also need to swap the headlight aim adjustment motor, I referred to this video: kzfaq.info/get/bejne/gp6ieLhh2bWuias.html. Other than that your video is brilliant, made the swap easy to do with a little bit of time on my hands (1.5 hours or so).

@estabanb55 2 жыл бұрын

Now I know why it cost so much to replace the headlights jeez

@wgtetz Жыл бұрын

If you're talking about replacing the headlight assembly, yeah it's a pain. Replacing a burned out main headlight bulb, though, is pretty simple. I've done it almost 10 times by now, takes less than 5 minutes. I'm an Uber driver, and I'm not about to let a pothole and a dead light bulb put me out of commission for the rest of the night.

@LindaEckertBallard Жыл бұрын

It is really a shame for the replacement of a headlight would require this much body removal ... etc ... Just watching the trouble a tech has to go through to get to these parts brings tears to my eyes. Things do not have to be this difficult! Seems to me the "Engineers" who design these vehicles never consider maintenance ... God Bless

@LindaEckertBallard Жыл бұрын

@@wgtetz GEEZ - Maybe you can advise me on my Prius C problem: The clip providing power to my headlights is broken causing the headlight malfunction Warning to come on. I can see the plastic clip but not sure how to unplug it - very tight quarters and IMHO should not be so hard 😢 One side of the plastic plug clip is loose but not loose enough to unplug completely. I just don't want to cause more damage. The car was in an accident 10/2021 and that left headlight was cracked and replaced. I am pretty sure they did not replace the harness since I am now having this problem...and after watching this video (although very interesting and detailed) breaks my heart and I just don't have the heart to go back to the body shop that took such good care of me back after the accident. 😢

@chrisrodriguez1789 Жыл бұрын

@@LindaEckertBallard go back to the shop that did the job originally. you paid them to do it right. Dont feel bad about that