How to Replace Intake Manifold 2002-2005 Ford Explorer

Рет қаралды 53,268

2 жыл бұрын

Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ic/1AEIM00085
This video shows you how to install an intake manifold on your 2002-2005 Ford Explorer. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is added to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Pocket Screwdriver
• 13mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 8mm Socket 1aau.to/oa/1AXAA00017
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• T25 Driver 1aau.to/oa/1AXAA00008
• T25 Socket 1aau.to/oa/1AXAA00008
• T30 Bit 1aau.to/oa/1AXAA00008
• T30 Driver 1aau.to/oa/1AXAA00008
• T30 Socket
• Torque Wrench 1aau.to/oa/1AXAA00044
• 1-1/16 Inch Wrench
• 1-1/8 Inch Wrench
• Cloth Rags 1aau.to/oa/1AXSS00035
• Hammer 1aau.to/oa/1AXAA00091
• Pick 1aau.to/oa/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 18

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@trinitywave Жыл бұрын

I am SO DISSAPOINTED! This guy seems so nice and on the level. I was crushed to find out that after writing meticulous notes about this whole video, that the intake of my 2005 Ford Explorer did not match the one on the video and had different screws, and therefore different needs to be taken off. Maybe the 2005 "3rd gen" is different from my 2005 Ford Explorer RSC. I appreciate this guy making such beautiful videos and explaining things so well, I wish it could have aligned better for me today. I even bought extra tools for this job too, bummer.

@classicstangbrn8964 Жыл бұрын

I don't know why you did this video, didn't change the gasket rings but you showed me where the last hose went on my build so thank you.

@mariog7554 Ай бұрын

Thank you for this excellent instructional video. I'm not a professional mechanic but I am pretty handy. I did this job all myself and no vacuum leaks!

@Drnardinov Жыл бұрын

phenomenal camera work and sound level? Thanks for taking the time to show us this. You are great human.

@shadowOni82 2 жыл бұрын

why does everyone skip over how to get a solid bite on the that back bolt. im struggling bad.

@josephbenassi9697 2 жыл бұрын

I hear you brother aint that a trip? You have to slide up accross the engine, from there you will see it. "CHEERS"

@candymintz Жыл бұрын

at 15:34...no gasket required? do you need to clean off the underside of the air intake body before replacing?

@yeahrightmate 11 ай бұрын

Hi, do you have any idea why Ford has those long shafts on the valve cover bolts that stop you from using a normal socket on them.

@theonenonlysauce Жыл бұрын

Gonna be working on my bros truck. I figure what maybe wrong with it and this definitely seems to promising

@adalbertozelayala5702 2 жыл бұрын

I like to know if any one knows where the air vaccumm hose close to EGR valve go to connect on back of the engine plz let me know

@wakcedout Жыл бұрын

now would this work on a 2008 ford explorer with a v6, or do i need to do this to gain access to fuel injector 1 to replace it. ive searched far and wide for a video on how to access that one part and cant find one with this exception thats remotely close to my engine layout. its so aggravating as i can see and touch the injector in its location, i can remove its connector but im not entirley sure just whats needed to remover the little bastard to replace it as when engines hot its causing misfire issues right now.

@sebastiansoto3139 Жыл бұрын

I have Ford Explorer 2005 4.0 4X4 and Ford Explorer 2004 exactly the same i want to install an engine from 2002 Ford Explorer 4.0 4X4 is that posible there are the same 8th digit "E" is that posible please let me know

@AngelRodriguez-uf7rf Жыл бұрын

What’s the name of the sensor that has the red and green lines

@colonialroofingofnorthcaro441 Жыл бұрын

What happen to the gasket, I've got 6 round rubber gaskets that's supposed to go in, I didn't see you put anything for a gasket or anything on, you just took it out and then put it back in, what did I miss

@luisantonioespinogutierrez4302 5 ай бұрын

Hola que tal podrías hacer un video de como quitar el pedal del freno de estacionamiento de una explorer 2003 el mio se trabo y ya no baja esta durisimo solo logre quitar dos tornillos por que me estorbaba los fusibles y cables podrías hacer un video de como quitar ese pedal de freno de estacionamiento

@yourflorida 6 ай бұрын

Mostly good - BUT you need to discus the difficulties with the rear t30 bolt, very tricky location. Also, not one word about the gaskets. You pretend like they are not even part of the project.