How to Replace Rear Shock 2002-2005 Ford Explorer
Рет қаралды 22,291
2 жыл бұрынBuy Now!
New Shock & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASHA00445
This video shows you how to install rear shocks on your 2002-2005 Ford Explorer. A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/op4/1AXAA00013
• Pry Bar 1aau.to/oen/1AXAA00020
• 13mm Wrench 1aau.to/oeg/1AXAA00010
• 14mm Wrench 1aau.to/oeg/1AXAA00010
• 18mm Socket 1aau.to/ogY/1AXAA00043
• 21mm Socket 1aau.to/ogY/1AXAA00043
• Torque Wrench 1aau.to/ojy/1AXAA00044
• Rust Penetrant
• Hammer 1aau.to/oem/1AXAA00091
• Jack Stands 1aau.to/oep/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Ford Explorer 2002-2005 3rd Generation: • Ford Explorer 2002-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
@TRQ 2 жыл бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@johndoe5247 Жыл бұрын
I can't get the toe-link to just pop out like he does at 2:30. Help !
@williamvaughn9870 Жыл бұрын
I enjoy your videos the are very informative. It wasn't as easy as that, I couldn't get the strut out the way you did it I had to remove the outer dolt from the lower control arm and push it down far enough to remove the strut.
@praetorianpatriot3267 Жыл бұрын
And that's how we do that...!
@garypayne2712 Жыл бұрын
What is the length of the proper rear shock and strut assembly for this and what is the proper length for the rear stabilizer bar link for this 2004 ford explorer
@christopherhuott7910 4 ай бұрын
What is the torque spec for the knuckle to the lower control arm?
@eddiequintanilla5709 Жыл бұрын
What is the torque spec for the bolt that is the knuckle and lower control arm
@sorro_tek9599 2 жыл бұрын
Can i put anti-seize on the thread for any bolt i remove ? Tha k you 👌🙏
@LA_Commander Жыл бұрын
NO!!!! Do not do that on suspension bolts.
@LA_Commander Жыл бұрын
Hey Lenny, I thought you worked for 1AAuto?
@henrysam5296 2 ай бұрын
Should’ve tried a 6point wrench instead of a 12 point
@KhaosDubz Жыл бұрын
You put a new end link on for the video instead of showing how hard it is to remove
@richieportter463 Жыл бұрын
What did you use to cut
@BRadWilson3 Жыл бұрын
probably a torch
@williamvaughn9870 Жыл бұрын
@@BRadWilson3 driver side is close to gas tank filler hose, be careful!!
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 258 М.
Platinum Productions
Рет қаралды 209 М.
The Car Care Nut
Рет қаралды 871 М.
narezka:)
Рет қаралды 1,7 МЛН