How to Replace Lower Hose on a Shark Rocket Vacuum Cleaner

Рет қаралды 10,731

6 ай бұрын

Join Josh in this helpful video as he demonstrates the replacement of the lower hose on a Shark Rocket vacuum. Lower hose cracks are a common issue with Sharks, and Josh walks you through the repair process. While it may not be the easiest fix, if you're not comfortable attempting it on your own, we suggest reaching out to local vacuum and repair shops for professional assistance. Your vacuum will be up and running smoothly in no time!
You can find the links to purchase the glue, torx bits, and replacement hose down below.
Hose used in this video:
www.vacuumsrus.com/product/cl...
Security bits used in this video:
www.vacuumsrus.com/product/cl...
Glue used in this video:
www.vacuumsrus.com/product/cl...
Vacuums R Us & Sewing Too - Arvada Store
5215 W. 80th Ave.
Arvada, CO 80003
(303) 455-3096
www.vacuumsrus.com/vacuums-r-...
Vacuums R Us & Sewing Too - Boulder Store
3005 28th St.
Boulder, CO 80301
(303) 449-8913
www.vacuumsrus.com/vacuums-r-...
Vacuums R Us & Sewing Too - Fort Collins Store
501 Riverside Ave
Fort Collins, CO 80524
(970) 223-7327
www.vacuumsrus.com/vacuums-r-...

Пікірлер: 26

@LTA2004 3 ай бұрын

This is the ONLY replacement hose that actually fits. I bought several of them on eBay and Amazon and returned them all because they did not fit. If you need to replace the lower hose of your Shark Rocket buy it from this place. Thank you VacuumsRus!

@vacuumsrus 3 ай бұрын

aw man you made us blush. Thanks!

@thomaspritt385 2 ай бұрын

I concur with your comment.

@jeaniestoltz1764 Ай бұрын

So glad I found this video! This just happened to my vacuum last night!

@vacuumsrus Ай бұрын

Glad we could help!

@Terpfan007 12 сағат бұрын

Thank you!!

@vikkicsaszar2123 3 ай бұрын

Thank you for showing how to repair the hose.

@vacuumsrus 3 ай бұрын

Glad we could help!

@patriciasanders8523 6 ай бұрын

All of the T10 and T20 screws on my Shark Rocket were stripped at the manufacturing plant. Lots of fun trying to remove them . Good thing I have patience

@amritbl1854 6 ай бұрын

I want to replace my Hoover upright vac's split nozzle tube. So the same tube as in this video. Can you let me know what they are actually called or defined as? Am wondering if I can use similar piping that's used for plumbing?

@jimmack676 4 ай бұрын

Did I miss the place where you posted all the Shark relevant models associate with the bottom hose? Thx

@vacuumsrus 4 ай бұрын

Hi there, we didn't list them in the description but the applicable models are listed on our product page for the hose, here is the link: www.vacuumsrus.com/product/cleaning/vacuum-parts/uncategorized/shark-lower-hose-for-shark-rocket-models/

@IronHammer59 3 ай бұрын

Great video. One thing to add, care needs to be taken when “screwing the hose into the lower fitting for the power head. Damn thing is cheap and I split mine - lower fitting that is. Nothing some super glue and a couple narrow strips of duct tape couldn’t jury rig, though. Sadly,I probably won’t buy another Shark product. Their parts support sucks - and that’s putting it mildly. I turned the internet upside down looking for some vendor for parts. Anyone has any suggestions for finding that lower fitting, I’m all ears. Now if I could just figure out where these two small screws came from . . . 😅

@PaulBrosseau 4 ай бұрын

Is it me? Or can i not get a replacement lower hose for model UV450? I looked everywhere. I find many other models including UV480 so I ordered that hose but it seems to be just a little to wide and will not screw in properly.

@alicewilliams4036 4 ай бұрын

I have a UV330 and can't find that anywhere either.

@donnaelkins7416 3 ай бұрын

I’m looking for a hose for shark rocket deluxe pro HV325 40. I can’t seem to find it anywhere. Do you have any suggestions?

@steveadams3146 3 ай бұрын

Same question here. Is the hose for the HV325 the same for all series 320 vacuums?

@nadiaperoni9556 4 ай бұрын

What is the name of the glue you used?

@vacuumsrus 4 ай бұрын

Hi there, this is the glue we used: www.vacuumsrus.com/product/cleaning/vacuum-parts/uncategorized/clear-pliable-adhesive-glue-18-oz-tube/

@Rad9000 4 ай бұрын

Do you have the hose part number? I ordered a hose that says it is for the Shark Rocket I have. Problem is it does not thread without a lot of force. You didn’t seem to have any problem at all, is it possible the wrong size? The correct size should easily thread in correct?

@joshyouwa 4 ай бұрын

What model do you have?

@Rad9000 4 ай бұрын

@@joshyouwa HV302 26

@vacuumsrus 4 ай бұрын

The correct hose is linked in this video's description

@Rad9000 4 ай бұрын

@@vacuumsrusThank you!