Рет қаралды 43,654
Buy Now!
New Trailing Arm Bushing from 1AAuto.com 1aau.to/ia/1AAX...
This video shows you how to replace the rear trailing arm bushing on your 1997-2001 Honda CR-V. Rear trailing arm bushings cushion the movement of the suspension and hold the wheel in the correct position. Clunking sounds or a shimmying feeling while driving can indicate that your rear trailing arm bushings require replacement.
This process should be similar on the following vehicles:
1997 Honda CR-V
1998 Honda CR-V
1999 Honda CR-V
2000 Honda CR-V
2001 Honda CR-V
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oaWU/1A...
• Pry Bar 1aau.to/oGf/1AX...
• 10mm Socket 1aau.to/oaGs/1A...
• 12mm Socket 1aau.to/oaVW/1A...
• 14mm Socket 1aau.to/oaVW/1A...
• 17mm Socket 1aau.to/oaVW/1A...
• 19mm Socket 1aau.to/oXC/1AX...
• 2 Jaw Gear Puller
• Dead Blow Hammer 1aau.to/oJf/1AX...
• Trim Tool Set 1aau.to/oRt/1AX...
• Pliers
• Swivel
• Torque Wrench 1aau.to/oagC/1A...
• Drill
• Block of Wood
• Brake Grease
• Gloves 1aau.to/otg/1AX...
• Marker / Writing Utensil
• Safety Glasses 1aau.to/oog/1AX...
• Wire Ties
• Floor Jack 1aau.to/oML/1AX...
• Jack Stands 1aau.to/oJR/1AX...
• Large C-Clamp
• Wire Brush 1aau.to/ooN/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.