Straight forward - no nonsense. Great job Big Moe!

Man let me tell you from my experience, they aren't too bad, but DROPPING the DECK down and up, I had to use a impact driver to remove the nut, then unbolt the spindle bolts too, nothing bad too it but it is time consuming. Removing the deck, reinstalling it etc. dude thanks for posting the vid hey you could already have helped thousands of people! I work on them, I'm currently fixing seals and gaskets on a 2008 pro series Briggs and Stratton zero turn motor. She'll be ready for reinstallation tomorrow evening. Man coil was Rusty, flywheel was rusty been like that for years I believe. Not to mention the caked up oil and years of grass! Friggin mess. But I just about have er ready. 78% has been doing and hours of cleaning and cleaning

Thank you...I wish I would have seen this last year..I was grinding mine off..I went thru hell...lol took it to the shop, now I have another one...now I can do it°°° appreciate your vid,

Fought it for 4 hours found your video done in 30 minutes

Thanks alot you saved my bacon on my 636m stand on. I did the 2 bolt thing and a puller with no luck pulled the screws put balistal down there came back a couple minutes later she popped right off... THANKS AGAIN YOU NEED A CAPE!!!! FBWW

Good job Moe....No dealer needed.👍

Thank you. Gave me the answers I needed.

Thanks !Saved me lots of headaches.

Thanks for your help this was really plan an simple video the easiest way to do it again thanks for your help

You taught me something. I thank you sir.

I agree good vidoe. Have a good Sunday...

Nice video and nice 4th gen 4Runner in the background

Good job Moses Mow Mister!

Thanks for the video. I get to try this in a day or two.

Very help full. Thnx

good job brother!

Thanks for the information.

YOU HAVE THE BEST HOW TO DO EVER ! The pictures n highlighted parts is as special as a man like me ( special) as in “Forrest Gump “ special ! Thank you very much you just got a follower too !

I just replaced mine and the taper lock doesnt seem to lock back, causing the pulley to float up and down

My helper just went on a tree root hitting spree Friday. Bent the blade and shattered the CAST IRON spindle scag uses😦. I ordered 3 we shall see what happens when they come in

I been working on mowers since I was around 10years old now in my 50's . I work for a briggs dealer then as I got out of high school went to snapper then simplicity and ended up at AYP sears then I just stop got into a different field. But the new mowers they come out with is easier to repair but the parts cost. Maintenance is the key to lawn mowers. Good video and it shows you just don't mower grass you have to repair your equipment.

I was able to open the taper lock with a flat screwdriver and a flat cold chisel.

How long does it take to change

If the pulley is keyed, good luck

Scag easier than ferris to fix hub spindle

I am not a mechanic but I just happen to have a pulley puller.🤔 I call B.S.🤣

Why didn't you trade it for a new mower if it has over 500 hours on it That's what Mick would have done 😂😂

Your deck is starting to crack on the tiger if I was you paint it our save your money up for a used our new

Stop yapping so much and get to the good stuff