Scag V-ride 2 spindle replacement
Рет қаралды 2,183
Жыл бұрын
@angeldejesus3192 Ай бұрын
Gracias brother el seguro que tiene lo baje pero veré como puedo arreglarlo duro brother saludos desde Allentown PA
@BigRedServicesLLC Жыл бұрын
Yup, not a super hard job but can be a pita especially without help. Always grease your spindles if ya have grease fittings on them, and / or put a dab of grease on the bolt when ya change blades helps them not get heat seized.
@gibsonslawnservice7261 Жыл бұрын
I had to learn the hard way about not putting grease on the blade bolt
@BigRedServicesLLC Жыл бұрын
@@gibsonslawnservice7261 yup I used to never do it, an old mechanic showed me once ever since I’ve always done it every time I change the blades, doesn’t have to be a lot just a little grease rub it around on the threads before ya reinstall the blade. Never had a spindle blow up since.
@IOSeven Жыл бұрын
Gibson lawn care teaching 101 🫡🔥
Elite Landscapes Life Stories
Рет қаралды 14 М.
The Dangerson
Рет қаралды 10 М.
Matthew Parker
Рет қаралды 671 М.
Mechanical Mind
Рет қаралды 362 М.
Weekend Home Projects
Рет қаралды 19 М.