Buy Now!
New Parking Assist Sensor from 1AAuto.com 1aau.to/ia/1APRS00023
This video shows you how to install a parking assist sensor on your 2009-2019 Ford Flex. Vehicles equipped with rear view cameras and parking assist have a number of sensors mounted on the rear of the vehicle. If one has been damaged, or has failed, the system won’t work correctly, or cause a trouble code. If the fix is replacing the sensor, it can be easy to do.
This process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obho/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obho/1AXAA00013
• 5.5mm socket
• 8mm Socket 1aau.to/oa6N/1AXAA00017
• Trim Tool Set 1aau.to/o8R/1AXXX00006
• Gloves 1aau.to/oYW/1AXSS00048
• Safety Glasses 1aau.to/oR7/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.