How to Replace Power Steering Pulley 96-99 GMC Sierra K1500

Рет қаралды 203,283

1A Auto: Repair Tips & Secrets Only Mechanics Know

7 жыл бұрын

Buy Now!
New Power Steering Pump Pulley from 1AAuto.com 1aau.to/ia/1ASPP00043
1A Auto shows you how to repair, install, fix, change or replace a screeching, squeaking or worn engine idler pulley. This video is applicable to the 96 GMC Sierra K1500
This process should be similar on the following vehicles:
1988 GMC K1500 Truck
1989 GMC K1500 Truck
1990 GMC K1500 Truck
1991 GMC K1500 Truck
1992 GMC K1500 Truck
1993 GMC K1500 Truck
1994 GMC K1500 Truck
1995 GMC K1500 Truck
1996 GMC K1500 Truck
1997 GMC K1500 Truck
1998 GMC K1500 Truck
1999 GMC K1500 Truck
🔧 List of tools used:
• 17mm Wrench 1aau.to/odW/1AXAA00010
• 21mm wrench
• 8mm Wrench 1aau.to/oak/1AXAA00011
• 21mm Socket 1aau.to/ogn/1AXAA00043
• 8mm Socket 1aau.to/omt/1AXAA00017
• Ratchet 1aau.to/opY/1AXAA00016
• Socket Extensions 1aau.to/ooP/1AXAA00015
Subscribe: kzfaq.info/love/VvE8kQTuZEykvMFZBVzftg
Check out our playlist:
GMC Sierra K1500 1988-1998: kzfaq.info/sun/PL37d7oWG6wDDoEjrkOJuvqB9xj7IEf0Pa
For More Info visit us at 1aau.to/h/z3/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 38

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@catthunder2417 11 ай бұрын

This was the most informative view that I’ve seen

@shanl9583 2 жыл бұрын

Thanks for such a detailed video this is the best pully removal and installation I have seen. You guys are pros and I appreciate the knowledge

@chriscage5538 8 күн бұрын

I have got the exact same harbor freight pulley puller and I came here because it does want to go on and I was wondering if I was using the tool wrong... I did not get the information I needed

@giftofnile 4 жыл бұрын

If I follow the instructions I will not be able to lineup the other pulleys, and that is very important information you should include in your video.

@warnercarter5197 Ай бұрын

Any videos on how to remove the pump? Mine is bad on my 98 Sierra

@fakfatkids1812 6 жыл бұрын

Best instructional video as always

@swizzlecuts5004 5 жыл бұрын

Is the problem with the internal threads common and if I encounter it, what size is the stud used to push the pulley back on? Thanks

@carolduvall111 8 ай бұрын

Thanks guys

@joshn8583 Жыл бұрын

Mine wont come off and broke with the regular tool and wont budge with a 3 point, needs to come off now, any ideas

@ericjanzen257 5 жыл бұрын

I'm thinking there should be some info on aligning the pulleys. I actually paid a shop to change my pump and they didn't press the pulley on far enough and my belt has been chirping ever since.

@1AAuto 5 жыл бұрын

+Eric Janzen We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@adammentzer8267 9 ай бұрын

Please do

@CaliLowRiderBikes007 6 жыл бұрын

What i had to do to the tool that installs the pully is cut some of the stud off (3/16) and it works like a charm

@martycarroll3192 4 жыл бұрын

Can you tell me what the part is that is at the end of the steering rod? Looks like a pump. I'm leaking fluid from the bottom of that part. What do I need to replace? Is there a gasket that wears out that I can replace?

@ronxx3695 4 жыл бұрын

@1a auto parts any chance you can make a video on power steering pump replacement for a 2007-14 suburban?

@1AAuto 4 жыл бұрын

+Ron Xx We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com

@benkanobe7500 4 жыл бұрын

Help! My power steering is making noise. Why would you replace the pulley????? Isn't it the pump that goes bad? I am confused and don't want to fire "The Parts Cannon" at my truck. So why, why, why would you replace the pulley???

@1AAuto 4 жыл бұрын

+Ben Kanobe Thanks for watching! The main reason to replace the pulley is when the bearing wears out causing it to wobble, and in turn create a lot of belt squeal. 1aauto.com

@sthpac69 4 жыл бұрын

My 92 Silverado has new water pump, tensioner pulley, idler pulley , serpentine belt and alternator but it still whistles loud when i start her up. I having a heck of a time locating this sound but i was told it could be the pump but the sound isn't the sound of power steering pump, it is more of a whistle. Could it be the steering pulley?

@anthonyvarela5690 Жыл бұрын

What did it end up being ?

@togodbetheglory9725 5 жыл бұрын

Mine broke the center of the pulley..can I get it out the same way..it just the ring holding in the bolt..any help..will be appreciated

@1AAuto 5 жыл бұрын

+ggg's fan As long as the pully removing tool can still grab onto the pully, then it should remove the same way.

@whodoneit1224 6 жыл бұрын

I replaced my power steering pump and have a belt squall but goes away when you turn the steering wheel back in forth .. i'm thinking i pressed the ps pulley on to far or not enough..

@lavenderhawk 5 жыл бұрын

me too.. think i pressed it to far..

@michaelcamacho7424 4 жыл бұрын

Gear wrenches would make this a few moments love gear wrenches

@davidricher8370 3 жыл бұрын

I don't understand, if the pulley comes off wit the whole pump unit, why do we have to remove the pulley first?

@Chris-kq7ko 3 жыл бұрын

You don’t

@andrewhoward7089 Жыл бұрын

Can’t remove the pump on these trucks without removing the pulley. 3 Bolts directly behind the pulley that can’t be removed

@jamieromanowicz4919 3 жыл бұрын

The 7.4 isn't the same. Do you have a video for the 7.4?

@1AAuto 3 жыл бұрын

+Jamie Romanowicz We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c